dwww Home


Found 4 packages, which contain /usr/share/man/man4:

Package: manpages

Description: Manual pages about using a GNU/Linux system
This package contains GNU/Linux manual pages for these sections:
 4 = Devices (e.g. hd, sd).
 5 = File formats and protocols, syntaxes of several system
 files (e.g. wtmp, /etc/passwd, nfs).
 7 = Conventions and standards, macro packages, etc.
 (e.g. nroff, ascii).
Beside the intro man page describing the section, a few manual pages from sections 1,6 and 8 are also provided.
The man pages describe syntaxes of several system files.
Homepage: https://www.kernel.org/doc/man-pages/
copyright | changelog | Debian changelog

Manual pages:

getent(1) iconv(1) intro(1)
ldd(1) locale(1) localedef(1)
memusage(1) memusagestat(1) mtrace(1)
pldd(1) sprof(1) intro(2)
intro(3) queue(3) sigevent(3type)
siginfo_t(3type) sigset_t(3type) sigval(3type)
stpecpy(3) stpecpyx(3) ustpcpy(3)
ustr2stp(3) zustr2stp(3) zustr2ustp(3)
cciss(4) console_codes(4) cpuid(4)
dsp56k(4) full(4) fuse(4)
hd(4) hpsa(4) initrd(4)
intro(4) kmem(4) lirc(4)
loop-control(4) loop(4) lp(4)
mem(4) mouse(4) msr(4)
null(4) port(4) ptmx(4)
pts(4) ram(4) random(4)
rtc(4) sd(4) smartpqi(4)
st(4) tty(4) ttyS(4)
urandom(4) vcs(4) vcsa(4)
veth(4) wavelan(4) zero(4)
acct(5) charmap(5) core(5)
dir_colors(5) elf(5) filesystems(5)
fs(5) gai.conf(5) group(5)
host.conf(5) hosts(5) hosts.equiv(5)
intro(5) issue(5) locale(5)
motd(5) networks(5) nologin(5)
nss(5) nsswitch.conf(5) proc(5)
procfs(5) protocols(5) repertoiremap(5)
resolv.conf(5) resolver(5) rpc(5)
securetty(5) services(5) shells(5)
slabinfo(5) sysfs(5) termcap(5)
tmpfs(5) ttytype(5) tzfile(5)
utmp(5) utmpx(5) wtmp(5)
intro(6) address_families(7) aio(7)
armscii-8(7) arp(7) ascii(7)
attributes(7) boot(7) bootparam(7)
bpf-helpers(7) capabilities(7) cgroup_namespaces(7)
cgroups(7) charsets(7) complex(7)
cp1251(7) cp1252(7) cpuset(7)
credentials(7) ddp(7) environ(7)
epoll(7) fanotify(7) feature_test_macros(7)
fifo(7) ftm(7) futex(7)
glibc(7) glob(7) hier(7)
hostname(7) icmp(7) inode(7)
inotify(7) intro(7) ip(7)
ipc_namespaces(7) ipv6(7) iso-8859-1(7)
iso-8859-10(7) iso-8859-11(7) iso-8859-13(7)
iso-8859-14(7) iso-8859-15(7) iso-8859-16(7)
iso-8859-2(7) iso-8859-3(7) iso-8859-4(7)
iso-8859-5(7) iso-8859-6(7) iso-8859-7(7)
iso-8859-8(7) iso-8859-9(7) iso_8859-1(7)
iso_8859-10(7) iso_8859-11(7) iso_8859-13(7)
iso_8859-14(7) iso_8859-15(7) iso_8859-16(7)
iso_8859-2(7) iso_8859-3(7) iso_8859-4(7)
iso_8859-5(7) iso_8859-6(7) iso_8859-7(7)
iso_8859-8(7) iso_8859-9(7) iso_8859_1(7)
iso_8859_10(7) iso_8859_11(7) iso_8859_13(7)
iso_8859_14(7) iso_8859_15(7) iso_8859_16(7)
iso_8859_2(7) iso_8859_3(7) iso_8859_4(7)
iso_8859_5(7) iso_8859_6(7) iso_8859_7(7)
iso_8859_8(7) iso_8859_9(7) kernel_lockdown(7)
keyrings(7) koi8-r(7) koi8-u(7)
landlock(7) latin1(7) latin10(7)
latin2(7) latin3(7) latin4(7)
latin5(7) latin6(7) latin7(7)
latin8(7) latin9(7) libc(7)
locale(7) mailaddr(7) man-pages(7)
man(7) math_error(7) mount_namespaces(7)
mq_overview(7) namespaces(7) netdevice(7)
netlink(7) network_namespaces(7) nptl(7)
numa(7) operator(7) packet(7)
path_resolution(7) persistent-keyring(7) pid_namespaces(7)
pipe(7) pkeys(7) posixoptions(7)
precedence(7) process-keyring(7) pthreads(7)
pty(7) queue(7) random(7)
raw(7) re_format(7) regex(7)
rtld-audit(7) rtnetlink(7) sched(7)
sem_overview(7) session-keyring(7) shm_overview(7)
sigevent(7) signal-safety(7) signal(7)
sock_diag(7) socket(7) spufs(7)
standards(7) string_copying(7) suffixes(7)
svipc(7) symlink(7) system_data_types(7)
sysvipc(7) tcp(7) termio(7)
thread-keyring(7) time(7) time_namespaces(7)
tis-620(7) udp(7) udplite(7)
unicode(7) units(7) unix(7)
uri(7) url(7) urn(7)
user-keyring(7) user-session-keyring(7) user_namespaces(7)
utf-8(7) utf8(7) uts_namespaces(7)
vdso(7) vsock(7) x25(7)
xattr(7) iconvconfig(8) intro(8)
ld-linux(8) ld-linux.so(8) ld.so(8)
ldconfig(8) sln(8) tzselect(8)
zdump(8) zic(8)

Other documents:

/usr/share/doc/manpages

Package: manpages-dev

Description: Manual pages about using GNU/Linux for development
These man pages describe the Linux programming interface, including these two sections:
 2 = Linux system calls.
 3 = Library calls (note that a more comprehensive source of information
 may be found in the glibc-doc and glibc-doc-reference packages).
Homepage: https://www.kernel.org/doc/man-pages/

Manual pages:

_Exit(2) __clone2(2) _exit(2)
_llseek(2) _newselect(2) _syscall(2)
_sysctl(2) accept(2) accept4(2)
access(2) acct(2) add_key(2)
adjtimex(2) afs_syscall(2) alarm(2)
alloc_hugepages(2) arch_prctl(2) arm_fadvise(2)
arm_fadvise64_64(2) arm_sync_file_range(2) bdflush(2)
bind(2) bpf(2) break(2)
brk(2) cacheflush(2) capget(2)
capset(2) chdir(2) chmod(2)
chown(2) chown32(2) chroot(2)
clock_adjtime(2) clock_getres(2) clock_gettime(2)
clock_nanosleep(2) clock_settime(2) clone(2)
clone2(2) clone3(2) close(2)
close_range(2) connect(2) copy_file_range(2)
creat(2) create_module(2) delete_module(2)
dup(2) dup2(2) dup3(2)
epoll_create(2) epoll_create1(2) epoll_ctl(2)
epoll_pwait(2) epoll_pwait2(2) epoll_wait(2)
eventfd(2) eventfd2(2) execve(2)
execveat(2) exit(2) exit_group(2)
faccessat(2) faccessat2(2) fadvise64(2)
fadvise64_64(2) fallocate(2) fanotify_init(2)
fanotify_mark(2) fattach(2) fchdir(2)
fchmod(2) fchmodat(2) fchown(2)
fchown32(2) fchownat(2) fcntl(2)
fcntl64(2) fdatasync(2) fdetach(2)
fgetxattr(2) finit_module(2) flistxattr(2)
flock(2) fork(2) free_hugepages(2)
fremovexattr(2) fsetxattr(2) fstat(2)
fstat64(2) fstatat(2) fstatat64(2)
fstatfs(2) fstatfs64(2) fsync(2)
ftruncate(2) ftruncate64(2) futex(2)
futimesat(2) get_kernel_syms(2) get_mempolicy(2)
get_robust_list(2) get_thread_area(2) getcpu(2)
getcwd(2) getdents(2) getdents64(2)
getdomainname(2) getegid(2) getegid32(2)
geteuid(2) geteuid32(2) getgid(2)
getgid32(2) getgroups(2) getgroups32(2)
gethostname(2) getitimer(2) getmsg(2)
getpagesize(2) getpeername(2) getpgid(2)
getpgrp(2) getpid(2) getpmsg(2)
getppid(2) getpriority(2) getrandom(2)
getresgid(2) getresgid32(2) getresuid(2)
getresuid32(2) getrlimit(2) getrusage(2)
getsid(2) getsockname(2) getsockopt(2)
gettid(2) gettimeofday(2) getuid(2)
getuid32(2) getunwind(2) getxattr(2)
gtty(2) idle(2) inb(2)
inb_p(2) init_module(2) inl(2)
inl_p(2) inotify_add_watch(2) inotify_init(2)
inotify_init1(2) inotify_rm_watch(2) insb(2)
insl(2) insw(2) inw(2)
inw_p(2) io_cancel(2) io_destroy(2)
io_getevents(2) io_setup(2) io_submit(2)
ioctl(2) ioctl_console(2) ioctl_fat(2)
ioctl_ficlone(2) ioctl_ficlonerange(2) ioctl_fideduperange(2)
ioctl_fslabel(2) ioctl_getfsmap(2) ioctl_iflags(2)
ioctl_ns(2) ioctl_tty(2) ioctl_userfaultfd(2)
ioperm(2) iopl(2) ioprio_get(2)
ioprio_set(2) ipc(2) isastream(2)
kcmp(2) kexec_file_load(2) kexec_load(2)
keyctl(2) kill(2) landlock_add_rule(2)
landlock_create_ruleset(2) landlock_restrict_self(2) lchown(2)
lchown32(2) lgetxattr(2) link(2)
linkat(2) listen(2) listxattr(2)
llistxattr(2) llseek(2) lock(2)
lookup_dcookie(2) lremovexattr(2) lseek(2)
lsetxattr(2) lstat(2) lstat64(2)
madvise(2) madvise1(2) mbind(2)
membarrier(2) memfd_create(2) memfd_secret(2)
migrate_pages(2) mincore(2) mkdir(2)
mkdirat(2) mknod(2) mknodat(2)
mlock(2) mlock2(2) mlockall(2)
mmap(2) mmap2(2) modify_ldt(2)
mount(2) mount_setattr(2) move_pages(2)
mprotect(2) mpx(2) mq_getsetattr(2)
mq_notify(2) mq_open(2) mq_timedreceive(2)
mq_timedsend(2) mq_unlink(2) mremap(2)
msgctl(2) msgget(2) msgop(2)
msgrcv(2) msgsnd(2) msync(2)
munlock(2) munlockall(2) munmap(2)
name_to_handle_at(2) nanosleep(2) newfstatat(2)
nfsservctl(2) nice(2) oldfstat(2)
oldlstat(2) oldolduname(2) oldstat(2)
olduname(2) open(2) open_by_handle_at(2)
open_how(2type) openat(2) openat2(2)
outb(2) outb_p(2) outl(2)
outl_p(2) outsb(2) outsl(2)
outsw(2) outw(2) outw_p(2)
pause(2) pciconfig_iobase(2) pciconfig_read(2)
pciconfig_write(2) perf_event_open(2) perfmonctl(2)
personality(2) phys(2) pidfd_getfd(2)
pidfd_open(2) pidfd_send_signal(2) pipe(2)
pipe2(2) pivot_root(2) pkey_alloc(2)
pkey_free(2) pkey_mprotect(2) poll(2)
posix_fadvise(2) ppoll(2) prctl(2)
pread(2) pread64(2) preadv(2)
preadv2(2) prlimit(2) prlimit64(2)
process_madvise(2) process_vm_readv(2) process_vm_writev(2)
prof(2) pselect(2) pselect6(2)
ptrace(2) putmsg(2) putpmsg(2)
pwrite(2) pwrite64(2) pwritev(2)
pwritev2(2) query_module(2) quotactl(2)
read(2) readahead(2) readdir(2)
readlink(2) readlinkat(2) readv(2)
reboot(2) recv(2) recvfrom(2)
recvmmsg(2) recvmsg(2) remap_file_pages(2)
removexattr(2) rename(2) renameat(2)
renameat2(2) request_key(2) restart_syscall(2)
rmdir(2) rt_sigaction(2) rt_sigpending(2)
rt_sigprocmask(2) rt_sigqueueinfo(2) rt_sigreturn(2)
rt_sigsuspend(2) rt_sigtimedwait(2) rt_tgsigqueueinfo(2)
s390_guarded_storage(2) s390_pci_mmio_read(2) s390_pci_mmio_write(2)
s390_runtime_instr(2) s390_sthyi(2) sbrk(2)
sched_get_priority_max(2) sched_get_priority_min(2) sched_getaffinity(2)
sched_getattr(2) sched_getparam(2) sched_getscheduler(2)
sched_rr_get_interval(2) sched_setaffinity(2) sched_setattr(2)
sched_setparam(2) sched_setscheduler(2) sched_yield(2)
seccomp(2) seccomp_unotify(2) security(2)
select(2) select_tut(2) semctl(2)
semget(2) semop(2) semtimedop(2)
send(2) sendfile(2) sendfile64(2)
sendmmsg(2) sendmsg(2) sendto(2)
set_mempolicy(2) set_robust_list(2) set_thread_area(2)
set_tid_address(2) setdomainname(2) setegid(2)
seteuid(2) setfsgid(2) setfsgid32(2)
setfsuid(2) setfsuid32(2) setgid(2)
setgid32(2) setgroups(2) setgroups32(2)
sethostname(2) setitimer(2) setns(2)
setpgid(2) setpgrp(2) setpriority(2)
setregid(2) setregid32(2) setresgid(2)
setresgid32(2) setresuid(2) setresuid32(2)
setreuid(2) setreuid32(2) setrlimit(2)
setsid(2) setsockopt(2) settimeofday(2)
setuid(2) setuid32(2) setup(2)
setxattr(2) sgetmask(2) shmat(2)
shmctl(2) shmdt(2) shmget(2)
shmop(2) shutdown(2) sigaction(2)
sigaltstack(2) signal(2) signalfd(2)
signalfd4(2) sigpending(2) sigprocmask(2)
sigreturn(2) sigsuspend(2) sigtimedwait(2)
sigwaitinfo(2) socket(2) socketcall(2)
socketpair(2) splice(2) spu_create(2)
spu_run(2) ssetmask(2) stat(2)
stat64(2) statfs(2) statfs64(2)
statx(2) stime(2) stty(2)
subpage_prot(2) swapoff(2) swapon(2)
symlink(2) symlinkat(2) sync(2)
sync_file_range(2) sync_file_range2(2) syncfs(2)
syscall(2) syscalls(2) sysctl(2)
sysfs(2) sysinfo(2) syslog(2)
tee(2) tgkill(2) time(2)
timer_create(2) timer_delete(2) timer_getoverrun(2)
timer_gettime(2) timer_settime(2) timerfd_create(2)
timerfd_gettime(2) timerfd_settime(2) times(2)
tkill(2) truncate(2) truncate64(2)
tuxcall(2) ugetrlimit(2) umask(2)
umount(2) umount2(2) uname(2)
unimplemented(2) unlink(2) unlinkat(2)
unshare(2) uselib(2) userfaultfd(2)
ustat(2) utime(2) utimensat(2)
utimes(2) vfork(2) vhangup(2)
vm86(2) vm86old(2) vmsplice(2)
vserver(2) wait(2) wait3(2)
wait4(2) waitid(2) waitpid(2)
write(2) writev(2) CIRCLEQ_EMPTY(3)
CIRCLEQ_ENTRY(3) CIRCLEQ_FIRST(3) CIRCLEQ_FOREACH(3)
CIRCLEQ_FOREACH_REVERSE(3) CIRCLEQ_HEAD(3) CIRCLEQ_HEAD_INITIALIZER(3)
CIRCLEQ_INIT(3) CIRCLEQ_INSERT_AFTER(3) CIRCLEQ_INSERT_BEFORE(3)
CIRCLEQ_INSERT_HEAD(3) CIRCLEQ_INSERT_TAIL(3) CIRCLEQ_LAST(3)
CIRCLEQ_LOOP_NEXT(3) CIRCLEQ_LOOP_PREV(3) CIRCLEQ_NEXT(3)
CIRCLEQ_PREV(3) CIRCLEQ_REMOVE(3) CMSG_ALIGN(3)
CMSG_DATA(3) CMSG_FIRSTHDR(3) CMSG_LEN(3)
CMSG_NXTHDR(3) CMSG_SPACE(3) CPU_ALLOC(3)
CPU_ALLOC_SIZE(3) CPU_AND(3) CPU_AND_S(3)
CPU_CLR(3) CPU_CLR_S(3) CPU_COUNT(3)
CPU_COUNT_S(3) CPU_EQUAL(3) CPU_EQUAL_S(3)
CPU_FREE(3) CPU_ISSET(3) CPU_ISSET_S(3)
CPU_OR(3) CPU_OR_S(3) CPU_SET(3)
CPU_SET_S(3) CPU_XOR(3) CPU_XOR_S(3)
CPU_ZERO(3) CPU_ZERO_S(3) DES_FAILED(3)
EOF(3const) EXIT_FAILURE(3const) EXIT_SUCCESS(3const)
FD_CLR(3) FD_ISSET(3) FD_SET(3)
FD_ZERO(3) FILE(3type) HUGE_VAL(3)
HUGE_VALF(3) HUGE_VALL(3) INFINITY(3)
LIST_EMPTY(3) LIST_ENTRY(3) LIST_FIRST(3)
LIST_FOREACH(3) LIST_HEAD(3) LIST_HEAD_INITIALIZER(3)
LIST_INIT(3) LIST_INSERT_AFTER(3) LIST_INSERT_BEFORE(3)
LIST_INSERT_HEAD(3) LIST_NEXT(3) LIST_REMOVE(3)
MAX(3) MB_CUR_MAX(3) MB_LEN_MAX(3)
MIN(3) NAN(3) NULL(3const)
PA_CHAR(3const) PA_DOUBLE(3const) PA_FLAG_LONG(3const)
PA_FLAG_LONG_DOUBLE(3const) PA_FLAG_LONG_LONG(3const) PA_FLAG_PTR(3const)
PA_FLAG_SHORT(3const) PA_FLOAT(3const) PA_INT(3const)
PA_LAST(3const) PA_POINTER(3const) PA_STRING(3const)
PA_WCHAR(3const) PA_WSTRING(3const) SIMPLEQ_EMPTY(3)
SIMPLEQ_ENTRY(3) SIMPLEQ_FIRST(3) SIMPLEQ_FOREACH(3)
SIMPLEQ_HEAD(3) SIMPLEQ_HEAD_INITIALIZER(3) SIMPLEQ_INIT(3)
SIMPLEQ_INSERT_AFTER(3) SIMPLEQ_INSERT_HEAD(3) SIMPLEQ_INSERT_TAIL(3)
SIMPLEQ_NEXT(3) SIMPLEQ_REMOVE(3) SIMPLEQ_REMOVE_HEAD(3)
SLIST_EMPTY(3) SLIST_ENTRY(3) SLIST_FIRST(3)
SLIST_FOREACH(3) SLIST_HEAD(3) SLIST_HEAD_INITIALIZER(3)
SLIST_INIT(3) SLIST_INSERT_AFTER(3) SLIST_INSERT_HEAD(3)
SLIST_NEXT(3) SLIST_REMOVE(3) SLIST_REMOVE_HEAD(3)
STAILQ_CONCAT(3) STAILQ_EMPTY(3) STAILQ_ENTRY(3)
STAILQ_FIRST(3) STAILQ_FOREACH(3) STAILQ_HEAD(3)
STAILQ_HEAD_INITIALIZER(3) STAILQ_INIT(3) STAILQ_INSERT_AFTER(3)
STAILQ_INSERT_HEAD(3) STAILQ_INSERT_TAIL(3) STAILQ_NEXT(3)
STAILQ_REMOVE(3) STAILQ_REMOVE_HEAD(3) TAILQ_CONCAT(3)
TAILQ_EMPTY(3) TAILQ_ENTRY(3) TAILQ_FIRST(3)
TAILQ_FOREACH(3) TAILQ_FOREACH_REVERSE(3) TAILQ_HEAD(3)
TAILQ_HEAD_INITIALIZER(3) TAILQ_INIT(3) TAILQ_INSERT_AFTER(3)
TAILQ_INSERT_BEFORE(3) TAILQ_INSERT_HEAD(3) TAILQ_INSERT_TAIL(3)
TAILQ_LAST(3) TAILQ_NEXT(3) TAILQ_PREV(3)
TAILQ_REMOVE(3) TAILQ_SWAP(3) _Generic(3)
_Static_assert(3) __after_morecore_hook(3) __fbufsize(3)
__flbf(3) __fpending(3) __fpurge(3)
__freadable(3) __freading(3) __free_hook(3)
__fsetlocking(3) __fwritable(3) __fwriting(3)
__malloc_hook(3) __malloc_initialize_hook(3) __memalign_hook(3)
__ppc_get_timebase(3) __ppc_get_timebase_freq(3) __ppc_mdoio(3)
__ppc_mdoom(3) __ppc_set_ppr_low(3) __ppc_set_ppr_med(3)
__ppc_set_ppr_med_high(3) __ppc_set_ppr_med_low(3) __ppc_set_ppr_very_low(3)
__ppc_yield(3) __realloc_hook(3) __setfpucw(3)
_flushlbf(3) a64l(3) abort(3)
abs(3) acos(3) acosf(3)
acosh(3) acoshf(3) acoshl(3)
acosl(3) addmntent(3) addseverity(3)
adjtime(3) aio_cancel(3) aio_error(3)
aio_fsync(3) aio_init(3) aio_read(3)
aio_return(3) aio_suspend(3) aio_write(3)
aiocb(3type) aligned_alloc(3) alloca(3)
alphasort(3) arc4random(3) arc4random_buf(3)
arc4random_uniform(3) argz(3) argz_add(3)
argz_add_sep(3) argz_append(3) argz_count(3)
argz_create(3) argz_create_sep(3) argz_delete(3)
argz_extract(3) argz_insert(3) argz_next(3)
argz_replace(3) argz_stringify(3) asctime(3)
asctime_r(3) asin(3) asinf(3)
asinh(3) asinhf(3) asinhl(3)
asinl(3) asprintf(3) assert(3)
assert_perror(3) atan(3) atan2(3)
atan2f(3) atan2l(3) atanf(3)
atanh(3) atanhf(3) atanhl(3)
atanl(3) atexit(3) atof(3)
atoi(3) atol(3) atoll(3)
atoq(3) auth_destroy(3) authnone_create(3)
authunix_create(3) authunix_create_default(3) backtrace(3)
backtrace_symbols(3) backtrace_symbols_fd(3) basename(3)
bcmp(3) bcopy(3) be16toh(3)
be32toh(3) be64toh(3) bindresvport(3)
blkcnt_t(3type) blksize_t(3type) bsd_signal(3)
bsearch(3) bstring(3) bswap(3)
bswap_16(3) bswap_32(3) bswap_64(3)
btowc(3) btree(3) byteorder(3)
bzero(3) cabs(3) cabsf(3)
cabsl(3) cacos(3) cacosf(3)
cacosh(3) cacoshf(3) cacoshl(3)
cacosl(3) calloc(3) callrpc(3)
canonicalize_file_name(3) carg(3) cargf(3)
cargl(3) casin(3) casinf(3)
casinh(3) casinhf(3) casinhl(3)
casinl(3) catan(3) catanf(3)
catanh(3) catanhf(3) catanhl(3)
catanl(3) catclose(3) catgets(3)
catopen(3) cbc_crypt(3) cbrt(3)
cbrtf(3) cbrtl(3) cc_t(3type)
ccos(3) ccosf(3) ccosh(3)
ccoshf(3) ccoshl(3) ccosl(3)
ceil(3) ceilf(3) ceill(3)
cexp(3) cexp2(3) cexp2f(3)
cexp2l(3) cexpf(3) cexpl(3)
cfgetispeed(3) cfgetospeed(3) cfmakeraw(3)
cfree(3) cfsetispeed(3) cfsetospeed(3)
cfsetspeed(3) cimag(3) cimagf(3)
cimagl(3) circleq(3) clearenv(3)
clearerr(3) clearerr_unlocked(3) clnt_broadcast(3)
clnt_call(3) clnt_control(3) clnt_create(3)
clnt_destroy(3) clnt_freeres(3) clnt_geterr(3)
clnt_pcreateerror(3) clnt_perrno(3) clnt_perror(3)
clnt_spcreateerror(3) clnt_sperrno(3) clnt_sperror(3)
clntraw_create(3) clnttcp_create(3) clntudp_bufcreate(3)
clntudp_create(3) clock(3) clock_getcpuclockid(3)
clock_t(3type) clockid_t(3type) clog(3)
clog10(3) clog10f(3) clog10l(3)
clog2(3) clog2f(3) clog2l(3)
clogf(3) clogl(3) closedir(3)
closelog(3) cmsg(3) confstr(3)
conj(3) conjf(3) conjl(3)
copysign(3) copysignf(3) copysignl(3)
cos(3) cosf(3) cosh(3)
coshf(3) coshl(3) cosl(3)
cpow(3) cpowf(3) cpowl(3)
cproj(3) cprojf(3) cprojl(3)
creal(3) crealf(3) creall(3)
csin(3) csinf(3) csinh(3)
csinhf(3) csinhl(3) csinl(3)
csqrt(3) csqrtf(3) csqrtl(3)
ctan(3) ctanf(3) ctanh(3)
ctanhf(3) ctanhl(3) ctanl(3)
ctermid(3) ctime(3) ctime_r(3)
cuserid(3) daemon(3) daylight(3)
db(3) dbopen(3) des_crypt(3)
des_setparity(3) dev_t(3type) difftime(3)
dirfd(3) dirname(3) div(3)
div_t(3type) dl_iterate_phdr(3) dladdr(3)
dladdr1(3) dlclose(3) dlerror(3)
dlinfo(3) dlmopen(3) dlopen(3)
dlsym(3) dlvsym(3) dn_comp(3)
dn_expand(3) double_t(3type) dprintf(3)
drand48(3) drand48_r(3) drem(3)
dremf(3) dreml(3) duplocale(3)
dysize(3) eaccess(3) ecb_crypt(3)
ecvt(3) ecvt_r(3) edata(3)
encrypt(3) encrypt_r(3) end(3)
endaliasent(3) endfsent(3) endgrent(3)
endhostent(3) endian(3) endmntent(3)
endnetent(3) endnetgrent(3) endprotoent(3)
endpwent(3) endrpcent(3) endservent(3)
endspent(3) endttyent(3) endusershell(3)
endutent(3) endutxent(3) envz(3)
envz_add(3) envz_entry(3) envz_get(3)
envz_merge(3) envz_remove(3) envz_strip(3)
epoll_data(3type) epoll_data_t(3type) epoll_event(3type)
erand48(3) erand48_r(3) erf(3)
erfc(3) erfcf(3) erfcl(3)
erff(3) erfl(3) err(3)
errno(3) error(3) error_at_line(3)
error_message_count(3) error_one_per_line(3) error_print_progname(3)
errx(3) etext(3) ether_aton(3)
ether_aton_r(3) ether_hostton(3) ether_line(3)
ether_ntoa(3) ether_ntoa_r(3) ether_ntohost(3)
euidaccess(3) eventfd_read(3) eventfd_write(3)
exec(3) execl(3) execle(3)
execlp(3) execv(3) execvp(3)
execvpe(3) exit(3) exp(3)
exp10(3) exp10f(3) exp10l(3)
exp2(3) exp2f(3) exp2l(3)
expf(3) expl(3) explicit_bzero(3)
expm1(3) expm1f(3) expm1l(3)
fabs(3) fabsf(3) fabsl(3)
fclose(3) fcloseall(3) fcvt(3)
fcvt_r(3) fdim(3) fdimf(3)
fdiml(3) fdopen(3) fdopendir(3)
feclearexcept(3) fedisableexcept(3) feenableexcept(3)
fegetenv(3) fegetexcept(3) fegetexceptflag(3)
fegetround(3) feholdexcept(3) fenv(3)
fenv_t(3type) feof(3) feof_unlocked(3)
feraiseexcept(3) ferror(3) ferror_unlocked(3)
fesetenv(3) fesetexceptflag(3) fesetround(3)
fetestexcept(3) feupdateenv(3) fexcept_t(3type)
fexecve(3) fflush(3) fflush_unlocked(3)
ffs(3) ffsl(3) ffsll(3)
fgetc(3) fgetc_unlocked(3) fgetgrent(3)
fgetgrent_r(3) fgetpos(3) fgetpwent(3)
fgetpwent_r(3) fgets(3) fgets_unlocked(3)
fgetspent(3) fgetspent_r(3) fgetwc(3)
fgetwc_unlocked(3) fgetws(3) fgetws_unlocked(3)
fileno(3) fileno_unlocked(3) finite(3)
finitef(3) finitel(3) float_t(3type)
flockfile(3) floor(3) floorf(3)
floorl(3) fma(3) fmaf(3)
fmal(3) fmax(3) fmaxf(3)
fmaxl(3) fmemopen(3) fmin(3)
fminf(3) fminl(3) fmod(3)
fmodf(3) fmodl(3) fmtmsg(3)
fnmatch(3) fopen(3) fopencookie(3)
forkpty(3) fpathconf(3) fpclassify(3)
fprintf(3) fpurge(3) fputc(3)
fputc_unlocked(3) fputs(3) fputs_unlocked(3)
fputwc(3) fputwc_unlocked(3) fputws(3)
fputws_unlocked(3) fread(3) fread_unlocked(3)
free(3) freeaddrinfo(3) freehostent(3)
freeifaddrs(3) freelocale(3) freopen(3)
frexp(3) frexpf(3) frexpl(3)
fscanf(3) fseek(3) fseeko(3)
fsetpos(3) fstatvfs(3) ftell(3)
ftello(3) ftime(3) ftok(3)
ftrylockfile(3) fts(3) fts_children(3)
fts_close(3) fts_open(3) fts_read(3)
fts_set(3) ftw(3) funlockfile(3)
futimens(3) futimes(3) fwide(3)
fwprintf(3) fwrite(3) fwrite_unlocked(3)
gai_cancel(3) gai_error(3) gai_strerror(3)
gai_suspend(3) gamma(3) gammaf(3)
gammal(3) gcvt(3) get_avphys_pages(3)
get_current_dir_name(3) get_myaddress(3) get_nprocs(3)
get_nprocs_conf(3) get_phys_pages(3) getaddrinfo(3)
getaddrinfo_a(3) getaliasbyname(3) getaliasbyname_r(3)
getaliasent(3) getaliasent_r(3) getauxval(3)
getc(3) getc_unlocked(3) getchar(3)
getchar_unlocked(3) getcontext(3) getcwd(3)
getdate(3) getdate_err(3) getdate_r(3)
getdelim(3) getdirentries(3) getdtablesize(3)
getentropy(3) getenv(3) getfsent(3)
getfsfile(3) getfsspec(3) getgrent(3)
getgrent_r(3) getgrgid(3) getgrgid_r(3)
getgrnam(3) getgrnam_r(3) getgrouplist(3)
gethostbyaddr(3) gethostbyaddr_r(3) gethostbyname(3)
gethostbyname2(3) gethostbyname2_r(3) gethostbyname_r(3)
gethostent(3) gethostent_r(3) gethostid(3)
getifaddrs(3) getipnodebyaddr(3) getipnodebyname(3)
getline(3) getloadavg(3) getlogin(3)
getlogin_r(3) getmntent(3) getmntent_r(3)
getnameinfo(3) getnetbyaddr(3) getnetbyaddr_r(3)
getnetbyname(3) getnetbyname_r(3) getnetent(3)
getnetent_r(3) getnetgrent(3) getnetgrent_r(3)
getopt(3) getopt_long(3) getopt_long_only(3)
getpass(3) getprotobyname(3) getprotobyname_r(3)
getprotobynumber(3) getprotobynumber_r(3) getprotoent(3)
getprotoent_r(3) getpt(3) getpw(3)
getpwent(3) getpwent_r(3) getpwnam(3)
getpwnam_r(3) getpwuid(3) getpwuid_r(3)
getrpcbyname(3) getrpcbyname_r(3) getrpcbynumber(3)
getrpcbynumber_r(3) getrpcent(3) getrpcent_r(3)
getrpcport(3) gets(3) getservbyname(3)
getservbyname_r(3) getservbyport(3) getservbyport_r(3)
getservent(3) getservent_r(3) getspent(3)
getspent_r(3) getspnam(3) getspnam_r(3)
getsubopt(3) getttyent(3) getttynam(3)
getusershell(3) getutent(3) getutent_r(3)
getutid(3) getutid_r(3) getutline(3)
getutline_r(3) getutmp(3) getutmpx(3)
getutxent(3) getutxid(3) getutxline(3)
getw(3) getwc(3) getwc_unlocked(3)
getwchar(3) getwchar_unlocked(3) getwd(3)
gid_t(3type) glob(3) globfree(3)
gmtime(3) gmtime_r(3) gnu_dev_major(3)
gnu_dev_makedev(3) gnu_dev_minor(3) gnu_get_libc_release(3)
gnu_get_libc_version(3) grantpt(3) group_member(3)
gsignal(3) h_errno(3) hash(3)
hasmntopt(3) hcreate(3) hcreate_r(3)
hdestroy(3) hdestroy_r(3) herror(3)
hsearch(3) hsearch_r(3) hstrerror(3)
htobe16(3) htobe32(3) htobe64(3)
htole16(3) htole32(3) htole64(3)
htonl(3) htons(3) hypot(3)
hypotf(3) hypotl(3) iconv(3)
iconv_close(3) iconv_open(3) id_t(3type)
if_freenameindex(3) if_indextoname(3) if_nameindex(3)
if_nametoindex(3) ilogb(3) ilogbf(3)
ilogbl(3) imaxabs(3) imaxdiv(3)
imaxdiv_t(3type) in6_addr(3type) in_addr(3type)
in_addr_t(3type) in_port_t(3type) index(3)
inet(3) inet_addr(3) inet_aton(3)
inet_lnaof(3) inet_makeaddr(3) inet_net_ntop(3)
inet_net_pton(3) inet_netof(3) inet_network(3)
inet_ntoa(3) inet_ntop(3) inet_pton(3)
initgroups(3) initstate(3) initstate_r(3)
innetgr(3) insque(3) int16_t(3type)
int32_t(3type) int64_t(3type) int8_t(3type)
intN_t(3type) intmax_t(3type) intptr_t(3type)
iovec(3type) iruserok(3) iruserok_af(3)
isalnum(3) isalnum_l(3) isalpha(3)
isalpha_l(3) isascii(3) isascii_l(3)
isatty(3) isblank(3) isblank_l(3)
iscntrl(3) iscntrl_l(3) isdigit(3)
isdigit_l(3) isfdtype(3) isfinite(3)
isgraph(3) isgraph_l(3) isgreater(3)
isgreaterequal(3) isinf(3) isinff(3)
isinfl(3) isless(3) islessequal(3)
islessgreater(3) islower(3) islower_l(3)
isnan(3) isnanf(3) isnanl(3)
isnormal(3) isprint(3) isprint_l(3)
ispunct(3) ispunct_l(3) isspace(3)
isspace_l(3) isunordered(3) isupper(3)
isupper_l(3) iswalnum(3) iswalpha(3)
iswblank(3) iswcntrl(3) iswctype(3)
iswdigit(3) iswgraph(3) iswlower(3)
iswprint(3) iswpunct(3) iswspace(3)
iswupper(3) iswxdigit(3) isxdigit(3)
isxdigit_l(3) itimerspec(3type) j0(3)
j0f(3) j0l(3) j1(3)
j1f(3) j1l(3) jn(3)
jnf(3) jnl(3) jrand48(3)
jrand48_r(3) key_decryptsession(3) key_encryptsession(3)
key_gendes(3) key_secretkey_is_set(3) key_setsecret(3)
killpg(3) klogctl(3) l64a(3)
labs(3) lckpwdf(3) lcong48(3)
lcong48_r(3) lconv(3type) ldexp(3)
ldexpf(3) ldexpl(3) ldiv(3)
ldiv_t(3type) le16toh(3) le32toh(3)
le64toh(3) lfind(3) lgamma(3)
lgamma_r(3) lgammaf(3) lgammaf_r(3)
lgammal(3) lgammal_r(3) lio_listio(3)
list(3) llabs(3) lldiv(3)
lldiv_t(3type) llrint(3) llrintf(3)
llrintl(3) llround(3) llroundf(3)
llroundl(3) localeconv(3) localtime(3)
localtime_r(3) lockf(3) loff_t(3type)
log(3) log10(3) log10f(3)
log10l(3) log1p(3) log1pf(3)
log1pl(3) log2(3) log2f(3)
log2l(3) logb(3) logbf(3)
logbl(3) logf(3) login(3)
login_tty(3) logl(3) logout(3)
logwtmp(3) longjmp(3) lrand48(3)
lrand48_r(3) lrint(3) lrintf(3)
lrintl(3) lround(3) lroundf(3)
lroundl(3) lsearch(3) lseek64(3)
lutimes(3) major(3) makecontext(3)
makedev(3) mallinfo(3) mallinfo2(3)
malloc(3) malloc_get_state(3) malloc_hook(3)
malloc_info(3) malloc_set_state(3) malloc_stats(3)
malloc_trim(3) malloc_usable_size(3) mallopt(3)
matherr(3) mblen(3) mbrlen(3)
mbrtowc(3) mbsinit(3) mbsnrtowcs(3)
mbsrtowcs(3) mbstowcs(3) mbtowc(3)
mcheck(3) mcheck_check_all(3) mcheck_pedantic(3)
memalign(3) memccpy(3) memchr(3)
memcmp(3) memcpy(3) memfrob(3)
memmem(3) memmove(3) mempcpy(3)
memrchr(3) memset(3) minor(3)
mkdtemp(3) mkfifo(3) mkfifoat(3)
mkostemp(3) mkostemps(3) mkstemp(3)
mkstemps(3) mktemp(3) mktime(3)
mmap64(3) mode_t(3type) modf(3)
modff(3) modfl(3) mpool(3)
mprobe(3) mq_close(3) mq_getattr(3)
mq_notify(3) mq_open(3) mq_receive(3)
mq_send(3) mq_setattr(3) mq_timedreceive(3)
mq_timedsend(3) mq_unlink(3) mrand48(3)
mrand48_r(3) mtrace(3) muntrace(3)
nan(3) nanf(3) nanl(3)
nearbyint(3) nearbyintf(3) nearbyintl(3)
netlink(3) newlocale(3) nextafter(3)
nextafterf(3) nextafterl(3) nextdown(3)
nextdownf(3) nextdownl(3) nexttoward(3)
nexttowardf(3) nexttowardl(3) nextup(3)
nextupf(3) nextupl(3) nftw(3)
nl_langinfo(3) nl_langinfo_l(3) nrand48(3)
nrand48_r(3) ntohl(3) ntohs(3)
ntp_adjtime(3) ntp_gettime(3) ntp_gettimex(3)
off64_t(3type) off_t(3type) offsetof(3)
on_exit(3) open_memstream(3) open_wmemstream(3)
opendir(3) openlog(3) openpty(3)
optarg(3) opterr(3) optind(3)
optopt(3) passwd2des(3) pathconf(3)
pclose(3) perror(3) pid_t(3type)
pmap_getmaps(3) pmap_getport(3) pmap_rmtcall(3)
pmap_set(3) pmap_unset(3) popen(3)
posix_fallocate(3) posix_madvise(3) posix_memalign(3)
posix_openpt(3) posix_spawn(3) posix_spawnp(3)
pow(3) pow10(3) pow10f(3)
pow10l(3) powerof2(3) powf(3)
powl(3) printf(3) printf.h(3head)
printf_arginfo_size_function(3type) printf_function(3type) printf_info(3type)
printf_va_arg_function(3type) profil(3) program_invocation_name(3)
program_invocation_short_name(3) psiginfo(3) psignal(3)
pthread_attr_destroy(3) pthread_attr_getaffinity_np(3) pthread_attr_getdetachstate(3)
pthread_attr_getguardsize(3) pthread_attr_getinheritsched(3) pthread_attr_getschedparam(3)
pthread_attr_getschedpolicy(3) pthread_attr_getscope(3) pthread_attr_getsigmask_np(3)
pthread_attr_getstack(3) pthread_attr_getstackaddr(3) pthread_attr_getstacksize(3)
pthread_attr_init(3) pthread_attr_setaffinity_np(3) pthread_attr_setdetachstate(3)
pthread_attr_setguardsize(3) pthread_attr_setinheritsched(3) pthread_attr_setschedparam(3)
pthread_attr_setschedpolicy(3) pthread_attr_setscope(3) pthread_attr_setsigmask_np(3)
pthread_attr_setstack(3) pthread_attr_setstackaddr(3) pthread_attr_setstacksize(3)
pthread_cancel(3) pthread_cleanup_pop(3) pthread_cleanup_pop_restore_np(3)
pthread_cleanup_push(3) pthread_cleanup_push_defer_np(3) pthread_create(3)
pthread_detach(3) pthread_equal(3) pthread_exit(3)
pthread_getaffinity_np(3) pthread_getattr_default_np(3) pthread_getattr_np(3)
pthread_getconcurrency(3) pthread_getcpuclockid(3) pthread_getname_np(3)
pthread_getschedparam(3) pthread_join(3) pthread_kill(3)
pthread_kill_other_threads_np(3) pthread_mutex_consistent(3) pthread_mutex_consistent_np(3)
pthread_mutexattr_getpshared(3) pthread_mutexattr_getrobust(3) pthread_mutexattr_getrobust_np(3)
pthread_mutexattr_setpshared(3) pthread_mutexattr_setrobust(3) pthread_mutexattr_setrobust_np(3)
pthread_rwlockattr_getkind_np(3) pthread_rwlockattr_setkind_np(3) pthread_self(3)
pthread_setaffinity_np(3) pthread_setattr_default_np(3) pthread_setcancelstate(3)
pthread_setcanceltype(3) pthread_setconcurrency(3) pthread_setname_np(3)
pthread_setschedparam(3) pthread_setschedprio(3) pthread_sigmask(3)
pthread_sigqueue(3) pthread_spin_destroy(3) pthread_spin_init(3)
pthread_spin_lock(3) pthread_spin_trylock(3) pthread_spin_unlock(3)
pthread_testcancel(3) pthread_timedjoin_np(3) pthread_tryjoin_np(3)
pthread_yield(3) ptrdiff_t(3type) ptsname(3)
ptsname_r(3) putc(3) putc_unlocked(3)
putchar(3) putchar_unlocked(3) putenv(3)
putgrent(3) putpwent(3) puts(3)
putspent(3) pututline(3) pututxline(3)
putw(3) putwc(3) putwc_unlocked(3)
putwchar(3) putwchar_unlocked(3) pvalloc(3)
qecvt(3) qecvt_r(3) qfcvt(3)
qfcvt_r(3) qgcvt(3) qsort(3)
qsort_r(3) raise(3) rand(3)
rand_r(3) random(3) random_r(3)
rawmemchr(3) rcmd(3) rcmd_af(3)
re_comp(3) re_exec(3) readdir(3)
readdir_r(3) realloc(3) reallocarray(3)
realpath(3) recno(3) regcomp(3)
regerror(3) regex(3) regex_t(3type)
regexec(3) regfree(3) register_printf_modifier(3)
register_printf_specifier(3) register_printf_type(3) registerrpc(3)
regmatch_t(3type) regoff_t(3type) remainder(3)
remainderf(3) remainderl(3) remove(3)
remque(3) remquo(3) remquof(3)
remquol(3) res_init(3) res_mkquery(3)
res_nclose(3) res_ninit(3) res_nmkquery(3)
res_nquery(3) res_nquerydomain(3) res_nsearch(3)
res_nsend(3) res_query(3) res_querydomain(3)
res_search(3) res_send(3) resolver(3)
rewind(3) rewinddir(3) rexec(3)
rexec_af(3) rindex(3) rint(3)
rintf(3) rintl(3) round(3)
roundf(3) roundl(3) roundup(3)
rpc(3) rpmatch(3) rresvport(3)
rresvport_af(3) rtime(3) rtnetlink(3)
ruserok(3) ruserok_af(3) sa_family_t(3type)
scalb(3) scalbf(3) scalbl(3)
scalbln(3) scalblnf(3) scalblnl(3)
scalbn(3) scalbnf(3) scalbnl(3)
scandir(3) scandirat(3) scanf(3)
sched_getcpu(3) secure_getenv(3) seed48(3)
seed48_r(3) seekdir(3) sem_close(3)
sem_destroy(3) sem_getvalue(3) sem_init(3)
sem_open(3) sem_post(3) sem_timedwait(3)
sem_trywait(3) sem_unlink(3) sem_wait(3)
setaliasent(3) setbuf(3) setbuffer(3)
setcontext(3) setenv(3) setfsent(3)
setgrent(3) sethostent(3) sethostid(3)
setjmp(3) setkey(3) setkey_r(3)
setlinebuf(3) setlocale(3) setlogmask(3)
setmntent(3) setnetent(3) setnetgrent(3)
setprotoent(3) setpwent(3) setrpcent(3)
setservent(3) setspent(3) setstate(3)
setstate_r(3) setttyent(3) setusershell(3)
setutent(3) setutxent(3) setvbuf(3)
sgetspent(3) sgetspent_r(3) shm_open(3)
shm_unlink(3) sigabbrev_np(3) sigaddset(3)
sigandset(3) sigblock(3) sigdelset(3)
sigdescr_np(3) sigemptyset(3) sigfillset(3)
siggetmask(3) sighold(3) sigignore(3)
siginterrupt(3) sigisemptyset(3) sigismember(3)
siglongjmp(3) sigmask(3) signbit(3)
signgam(3) significand(3) significandf(3)
significandl(3) sigorset(3) sigpause(3)
sigqueue(3) sigrelse(3) sigset(3)
sigsetjmp(3) sigsetmask(3) sigsetops(3)
sigstack(3) sigvec(3) sigwait(3)
simpleq(3) sin(3) sincos(3)
sincosf(3) sincosl(3) sinf(3)
sinh(3) sinhf(3) sinhl(3)
sinl(3) size_t(3type) sleep(3)
slist(3) snprintf(3) sockaddr(3type)
sockaddr_in(3type) sockaddr_in6(3type) sockaddr_storage(3type)
sockaddr_un(3type) sockatmark(3) socklen_t(3type)
speed_t(3type) sprintf(3) sqrt(3)
sqrtf(3) sqrtl(3) srand(3)
srand48(3) srand48_r(3) srandom(3)
srandom_r(3) sscanf(3) ssignal(3)
ssize_t(3type) stailq(3) stat(3type)
static_assert(3) statvfs(3) stdarg(3)
stderr(3) stdin(3) stdio(3)
stdio_ext(3) stdout(3) stpcpy(3)
stpncpy(3) strcasecmp(3) strcasestr(3)
strcat(3) strchr(3) strchrnul(3)
strcmp(3) strcoll(3) strcpy(3)
strcspn(3) strdup(3) strdupa(3)
strerror(3) strerror_l(3) strerror_r(3)
strerrordesc_np(3) strerrorname_np(3) strfmon(3)
strfmon_l(3) strfromd(3) strfromf(3)
strfroml(3) strfry(3) strftime(3)
strftime_l(3) string(3) strlen(3)
strncasecmp(3) strncat(3) strncmp(3)
strncpy(3) strndup(3) strndupa(3)
strnlen(3) strpbrk(3) strptime(3)
strrchr(3) strsep(3) strsignal(3)
strspn(3) strstr(3) strtod(3)
strtof(3) strtoimax(3) strtok(3)
strtok_r(3) strtol(3) strtold(3)
strtoll(3) strtoq(3) strtoul(3)
strtoull(3) strtoumax(3) strtouq(3)
strverscmp(3) strxfrm(3) suseconds_t(3type)
svc_destroy(3) svc_freeargs(3) svc_getargs(3)
svc_getcaller(3) svc_getreq(3) svc_getreqset(3)
svc_register(3) svc_run(3) svc_sendreply(3)
svc_unregister(3) svcerr_auth(3) svcerr_decode(3)
svcerr_noproc(3) svcerr_noprog(3) svcerr_progvers(3)
svcerr_systemerr(3) svcerr_weakauth(3) svcfd_create(3)
svcraw_create(3) svctcp_create(3) svcudp_bufcreate(3)
svcudp_create(3) swab(3) swapcontext(3)
swprintf(3) sys_errlist(3) sys_nerr(3)
sys_siglist(3) sysconf(3) sysexits.h(3head)
syslog(3) system(3) sysv_signal(3)
tailq(3) tan(3) tanf(3)
tanh(3) tanhf(3) tanhl(3)
tanl(3) tcdrain(3) tcflag_t(3type)
tcflow(3) tcflush(3) tcgetattr(3)
tcgetpgrp(3) tcgetsid(3) tcsendbreak(3)
tcsetattr(3) tcsetpgrp(3) tdelete(3)
tdestroy(3) telldir(3) tempnam(3)
termios(3) tfind(3) tgamma(3)
tgammaf(3) tgammal(3) time_t(3type)
timegm(3) timelocal(3) timer_t(3type)
timeradd(3) timerclear(3) timercmp(3)
timerisset(3) timersub(3) timespec(3type)
timeval(3type) timezone(3) tm(3type)
tmpfile(3) tmpnam(3) tmpnam_r(3)
toascii(3) tolower(3) tolower_l(3)
toupper(3) toupper_l(3) towctrans(3)
towlower(3) towlower_l(3) towupper(3)
towupper_l(3) trunc(3) truncf(3)
truncl(3) tsearch(3) ttyname(3)
ttyname_r(3) ttyslot(3) twalk(3)
twalk_r(3) tzname(3) tzset(3)
ualarm(3) uid_t(3type) uint16_t(3type)
uint32_t(3type) uint64_t(3type) uint8_t(3type)
uintN_t(3type) uintmax_t(3type) uintptr_t(3type)
ulckpwdf(3) ulimit(3) undocumented(3)
ungetc(3) ungetwc(3) unlocked_stdio(3)
unlockpt(3) unsetenv(3) updwtmp(3)
updwtmpx(3) useconds_t(3type) uselocale(3)
usleep(3) utmpname(3) utmpxname(3)
va_arg(3) va_copy(3) va_end(3)
va_list(3type) va_start(3) valloc(3)
vasprintf(3) vdprintf(3) verr(3)
verrx(3) versionsort(3) vfprintf(3)
vfscanf(3) vfwprintf(3) vlimit(3)
void(3type) vprintf(3) vscanf(3)
vsnprintf(3) vsprintf(3) vsscanf(3)
vswprintf(3) vsyslog(3) vtimes(3)
vwarn(3) vwarnx(3) vwprintf(3)
warn(3) warnx(3) wcpcpy(3)
wcpncpy(3) wcrtomb(3) wcscasecmp(3)
wcscat(3) wcschr(3) wcscmp(3)
wcscpy(3) wcscspn(3) wcsdup(3)
wcslen(3) wcsncasecmp(3) wcsncat(3)
wcsncmp(3) wcsncpy(3) wcsnlen(3)
wcsnrtombs(3) wcspbrk(3) wcsrchr(3)
wcsrtombs(3) wcsspn(3) wcsstr(3)
wcstoimax(3) wcstok(3) wcstombs(3)
wcstoumax(3) wcswidth(3) wctob(3)
wctomb(3) wctrans(3) wctype(3)
wcwidth(3) wmemchr(3) wmemcmp(3)
wmemcpy(3) wmemmove(3) wmempcpy(3)
wmemset(3) wordexp(3) wordfree(3)
wprintf(3) xcrypt(3) xdecrypt(3)
xdr(3) xdr_accepted_reply(3) xdr_array(3)
xdr_authunix_parms(3) xdr_bool(3) xdr_bytes(3)
xdr_callhdr(3) xdr_callmsg(3) xdr_char(3)
xdr_destroy(3) xdr_double(3) xdr_enum(3)
xdr_float(3) xdr_free(3) xdr_getpos(3)
xdr_inline(3) xdr_int(3) xdr_long(3)
xdr_opaque(3) xdr_opaque_auth(3) xdr_pmap(3)
xdr_pmaplist(3) xdr_pointer(3) xdr_reference(3)
xdr_rejected_reply(3) xdr_replymsg(3) xdr_setpos(3)
xdr_short(3) xdr_string(3) xdr_u_char(3)
xdr_u_int(3) xdr_u_long(3) xdr_u_short(3)
xdr_union(3) xdr_vector(3) xdr_void(3)
xdr_wrapstring(3) xdrmem_create(3) xdrrec_create(3)
xdrrec_endofrecord(3) xdrrec_eof(3) xdrrec_skiprecord(3)
xdrstdio_create(3) xencrypt(3) xprt_register(3)
xprt_unregister(3) y0(3) y0f(3)
y0l(3) y1(3) y1f(3)
y1l(3) yn(3) ynf(3)
ynl(3) console_ioctl(4) tty_ioctl(4)

Other documents:

/usr/share/doc/manpages-dev

Package: mdadm

Description: Tool to administer Linux MD arrays (software RAID)
The mdadm utility can be used to create, manage, and monitor MD (multi-disk) arrays for software RAID or multipath I/O.
This package automatically configures mdadm to assemble arrays during the system startup process. If not needed, this functionality can be disabled.
Homepage: https://raid.wiki.kernel.org/index.php/Linux_Raid
copyright | changelog | Debian changelog | Debian NEWS | FAQ

Manual pages:

md(4) mdadm.conf(5) mdadm(8)
mdmon(8)

Other documents:

/usr/share/doc/mdadm /usr/share/doc/mdadm/examples

Package: wireshark-common

Description: network traffic analyzer - common files
Wireshark is a network "sniffer" - a tool that captures and analyzes packets off the wire. Wireshark can decode too many protocols to list here.
This package provides files common to both wireshark and tshark (the console version).
Homepage: https://www.wireshark.org/
copyright | changelog | Debian changelog | Debian README

Manual pages:

androiddump(1) capinfos(1) captype(1)
ciscodump(1) dftest(1) dpauxmon(1)
dumpcap(1) editcap(1) mergecap(1)
mmdbresolve(1) randpkt(1) randpktdump(1)
rawshark(1) reordercap(1) sdjournal(1)
sshdump(1) text2pcap(1) udpdump(1)
wifidump(1) extcap(4) wireshark-filter(4)

Other documents:

/usr/share/doc/wireshark-common

Generated by dwww version 1.15 on Thu Sep 4 08:59:46 CEST 2025.