SMOKEPING_CONFIG(5) SmokePing SMOKEPING_CONFIG(5)
NAME
smokeping_config - Reference for the SmokePing Config File
OVERVIEW
SmokePing takes its configuration from a single central configuration
file. Its location must be hardcoded in the smokeping script and
smokeping.cgi.
The contents of this manual is generated directly from the configuration
file parser.
The Parser for the Configuration file is written using David Schweikert
Config::Grammar module. Read all about it in Config::Grammar.
The Configuration file has a tree-like structure with section headings
at various levels. It also contains variable assignments and tables.
Warning: this manual is rather long. See smokeping_examples for simple
configuration examples.
REFERENCE
GENERAL SYNTAX
The text below describes the general syntax of the SmokePing
configuration file. It was copied from the Config::Grammar
documentation.
'#' denotes a comment up to the end-of-line, empty lines are allowed and
space at the beginning and end of lines is trimmed.
'\' at the end of the line marks a continued line on the next line. A
single space will be inserted between the concatenated lines.
'@include filename' is used to include another file.
'@define a some value' will replace all occurrences of 'a' in the
following text with 'some value'.
Fields in tables that contain white space can be enclosed in either "'"
or """. Whitespace can also be escaped with "\". Quotes inside quotes
are allowed but must be escaped with a backslash as well.
SPECIFIC SYNTAX
The text below describes the specific syntax of the SmokePing
configuration file.
*** General *** (mandatory section)
General configuration values valid for the whole SmokePing setup.
The following variables can be set in this section:
owner (mandatory setting)
Name of the person responsible for this smokeping installation.
imgcache (mandatory setting)
A directory which is visible on your webserver where SmokePing can
cache graphs.
imgurl (mandatory setting)
Either an absolute URL to the imgcache directory or one relative to
the directory where you keep the SmokePing cgi.
datadir (mandatory setting)
The directory where SmokePing can keep its rrd files.
dyndir
The base directory where SmokePing keeps the files related to the
DYNAMIC function. This directory must be writeable by the WWW
server. It is also used for temporary storage of slave polling
results by the master in the master/slave mode.
If this variable is not specified, the value of "datadir" will be
used instead.
pagedir
Directory to store static representations of pages.
piddir (mandatory setting)
The directory where SmokePing keeps its pid when daemonized.
sendmail
Path to your sendmail binary. It will be used for sending mails in
connection with the support of DYNAMIC addresses.
offset
If you run many instances of smokeping you may want to prevent them
from hitting your network all at the same time. Using the offset
parameter you can change the point in time when the probes are run.
Offset is specified in % of total interval, or alternatively as
'random'. I recommend to use 'random'. Note that this does NOT
influence the rrds itself, it is just a matter of when data
acquisition is initiated. The default offset is 'random'.
smokemail (mandatory setting)
Path to the mail template for DYNAMIC hosts. This mail template must
contain keywords of the form <##keyword##>. There is a sample
template included with SmokePing.
cgiurl (mandatory setting)
Complete URL path of the SmokePing.cgi
mailhost
Instead of using sendmail, you can specify the name of an smtp
server and use perl's Net::SMTP module to send mail (for alerts and
DYNAMIC client script). Several comma separated mailhosts can be
specified. SmokePing will try one after the other if one does not
answer for 5 seconds.
mailuser
username on mailhost, SmokePing will use this user to send mail
(Net::SMTP).
mailpass
password of username on mailhost, SmokePing will use this password
to send mail (Net::SMTP).
snpphost
If you have a SNPP (Simple Network Pager Protocol) server at hand,
you can have alerts sent there too. Use the syntax snpp:someaddress
to use a snpp address in any place where you can use a mail address
otherwise.
contact (mandatory setting)
Mail address of the person responsible for this smokeping
installation.
display_name
What should the master host be called when working in master/slave
mode. This is used in the overview graph for example.
syslogfacility
The syslog facility to use, eg. local0...local7. Note: syslog
logging is only used if you specify this.
syslogpriority
The syslog priority to use, eg. debug, notice or info. Default is
info.
concurrentprobes
If you use multiple probes or multiple instances of the same probe
and you want them to run concurrently in separate processes, set
this to 'yes'. This gives you the possibility to specify probe-
specific step and offset parameters (see the 'Probes' section) for
each probe and makes the probes unable to block each other in cases
of service outages. The default is 'yes', but if you for some reason
want the old behaviour you can set this to 'no'.
changeprocessnames
When using 'concurrentprobes' (see above), this controls whether the
probe subprocesses should change their argv string to indicate their
probe in the process name. If set to 'yes' (the default), the probe
name will be appended to the process name as '[probe]', eg.
'/usr/bin/smokeping [FPing]'. If you don't like this behaviour, set
this variable to 'no'. If 'concurrentprobes' is not set to 'yes',
this variable has no effect.
Default value: changeprocessnames = yes
tmail
Path to your tSmoke HTML mail template file. See the tSmoke
documentation for details.
changecgiprogramname
Usually the Smokeping CGI tries to log any possible errors with an
extended program name that includes the IP address of the remote
client for easier debugging. If this variable is set to 'no', the
program name will not be modified. The only reason you would want
this is if you have a very old version of the CGI::Carp module. See
the installation document for details.
Default value: changecgiprogramname = yes
linkstyle
How the CGI self-referring links are created. The possible values
are
absolute
Full hostname and path derived from the 'cgiurl' variable
<a href="http://hostname/path/smokeping.cgi?foo=bar">
relative
Only the parameter part is specified
<a href="?foo=bar">
original
The way the links were generated before Smokeping version 2.0.4:
no hostname, only the path
<a href="/path/smokeping.cgi?foo=bar">
The default is "relative", which hopefully works for everybody.
Default value: linkstyle = relative
precreateperms
If this variable is set, the Smokeping daemon will create its
directory hierarchy under 'dyndir' (the CGI-writable tree) at
startup with the specified directory permission bits. The value is
interpreted as an octal value, eg. 775 for rwxrwxr-x etc.
If unset, the directories will be created dynamically with umask
022.
Example: precreateperms = 2755
*** Database *** (mandatory section)
Describes the properties of the round robin database for storing the
SmokePing data. Note that it is not possible to edit existing RRDs by
changing the entries in the cfg file.
The following variables can be set in this section:
step (mandatory setting)
Duration of the base operation interval of SmokePing in seconds.
SmokePing will venture out every step seconds to ping your target
hosts. If 'concurrentprobes' is set to 'yes' (see above), this
variable can be overridden by each probe. Note that the step in the
RRD files is fixed when they are originally generated, and if you
change the step parameter afterwards, you'll have to delete the old
RRD files or somehow convert them.
pings (mandatory setting)
How many pings should be sent to each target. Suggested: 20 pings.
Minimum value: 3 pings. This can be overridden by each probe. Some
probes (those derived from basefork.pm, ie. most except the FPing
variants) will even let this be overridden target-specifically. Note
that the number of pings in the RRD files is fixed when they are
originally generated, and if you change this parameter afterwards,
you'll have to delete the old RRD files or somehow convert them.
This section also contains a table describing the setup of the SmokePing
database. Below are reasonable defaults. Only change them if you know
rrdtool and its workings. Each row in the table describes one RRA.
# cons xff steps rows
AVERAGE 0.5 1 1008
AVERAGE 0.5 12 4320
MIN 0.5 12 4320
MAX 0.5 12 4320
AVERAGE 0.5 144 720
MAX 0.5 144 720
MIN 0.5 144 720
column 0
Consolidation method.
column 1
What part of the consolidated intervals must be known to warrant a
known entry.
column 2
How many steps to consolidate into for each RRA entry.
column 3
How many rows this RRA should have.
*** Presentation *** (mandatory section)
Defines how the SmokePing data should be presented.
The following variables can be set in this section:
template (mandatory setting)
The webpage template must contain keywords of the form
<##keyword##>. There is a sample template included with SmokePing;
use it as the basis for your experiments. Default template contains
a pointer to the SmokePing counter and homepage. I would be glad if
you would not remove this as it gives me an indication as to how
widely used the tool is.
charset
By default, SmokePing assumes the 'utf-8' character set. If you use
something else, this is the place to speak up.
htmltitle
By default, SmokePing will render the title of the graph in the
image, when set to 'yes' the title is inserted in the html page.
graphborders
By default, SmokePing will render gray border on a light gray
background, if set to 'no' borders will be hidden and the background
and canvas will be transparent.
The following sections are valid on level 1:
+overview (mandatory section)
The Overview section defines how the Overview graphs should look.
The following variables can be set in this section:
width (mandatory setting)
Width of the Overview Graphs.
height (mandatory setting)
Height of the Overview Graphs.
range
How much time should be depicted in the Overview graph. Time
must be specified as a number followed by a letter which
specifies the unit of time. Known units are: seconds, minutes,
hours, ddays, weeks, years.
max_rtt
Any roundtrip time larger than this value will be cropped in the
overview graph. Units is seconds (for example, 0.800).
median_color
By default the median line is drawn in red. Override it here
with a hex color in the format rrggbb. Note that if you work
with slaves, the slaves medians will be drawn in the slave color
in the overview graph.
strftime
Use posix strftime to format the timestamp in the left hand
lower corner of the overview graph
+detail (mandatory section)
The following variables can be set in this section:
width (mandatory setting)
How many pixels wide should detail graphs be
height (mandatory setting)
How many pixels high should detail graphs be
loss_background
Should the graphs be shown with a background showing loss data
for emphasis (yes/no)?
If this option is enabled, uptime data is no longer displayed in
the graph background.
logarithmic
should the graphs be shown in a logarithmic scale (yes/no)
unison_tolerance
if a graph is more than this factor of the median 'max' it drops
out of the unison scaling algorithm. A factor of two would mean
that any graph with a max either less than half or more than
twice the median 'max' will be dropped from unison scaling
max_rtt
Any roundtrip time larger than this value will be cropped in the
detail graph. Units is seconds (for example, 0.800).
strftime
Use posix strftime to format the timestamp in the left hand
lower corner of the detail graph
nodata_color
Paint the graph background in a special color when there is no
data for this period because smokeping has not been running
(#rrggbb)
The detailed display can contain several graphs of different
resolution. In this table you can specify the resolution of each
graph.
Example:
"Last 3 Hours" 3h
"Last 30 Hours" 30h
"Last 10 Days" 10d
"Last 400 Days" 400d
column 0
Description of the particular resolution.
column 1
How much time should be depicted. The format is the same as for
the age parameter of the Overview section.
The following sections are valid on level 2:
++loss_colors
In the Detail view, the color of the median line depends the
amount of lost packets. SmokePing comes with a reasonable
default setting, but you may choose to disagree. The table below
lets you specify your own coloring.
Example:
Loss Color Legend
1 00ff00 "<1"
3 0000ff "<3"
1000 ff0000 ">=3"
column 0
Activate when the number of lost pings is larger or equal to
this number
column 1
Color for this range.
column 2
Description for this range.
++uptime_colors
When monitoring a host with DYNAMIC addressing, SmokePing will
keep track of how long the machine is able to keep the same IP
address. This time is plotted as a color in the graphs
background. SmokePing comes with a reasonable default setting,
but you may choose to disagree. The table below lets you specify
your own coloring
Example:
# Uptime Color Legend
3600 00ff00 "<1h"
86400 0000ff "<1d"
604800 ff0000 "<1w"
1000000000000 ffff00 ">1w"
Uptime is in days!
column 0
Activate when uptime in days is larger of equal to this
number
column 1
Color for this uptime range.
column 2
Description for this range.
+charts
The SmokePing Charts feature allow you to have Top X lists created
according to various criteria.
Each type of Chart must live in its own subsection.
+ charts
menu = Charts
title = The most interesting destinations
++ median
sorter = Median(entries=>10)
title = Sorted by Median Roundtrip Time
menu = Top Median RTT
format = Median RTT %e s
The following variables can be set in this section:
menu (mandatory setting)
Menu entry for the Charts Section.
title (mandatory setting)
Page title for the Charts Section.
The following sections are valid on level 2:
++/[-_0-9a-zA-Z]+/
The following variables can be set in this section:
menu (mandatory setting)
Menu entry
title (mandatory setting)
Page title
sorter (mandatory setting)
sorter for this charts sections
format
sprintf format string to format current value
+multihost
Settings for the multihost graphs. At the moment this is only used
for the color setting. Check the documentation on the host property
of the target section for more.
The following variables can be set in this section:
colors
Space separated list of colors for multihost graphs
Example: colors = ff0000 00ff00 0000ff
+hierarchies
Provide an alternative presentation hierarchy for your smokeping
data. After setting up a hierarchy in this section. You can use it
in each target's parent property. A drop-down menu in the smokeping
website lets the user switch presentation hierarchy.
The following sections are valid on level 2:
++/[-_0-9a-zA-Z]+/
Identifier of the hierarchies. Use this as prefix in the targets
parent property
The following variables can be set in this section:
title (mandatory setting)
Title for this hierarchy
*** Probes *** (mandatory section)
The Probes Section configures Probe modules. Probe modules integrate an
external ping command into SmokePing. Check the documentation of each
module for more information about it.
The following sections are valid on level 1:
+/[-_0-9a-zA-Z]+/
Each module can take specific configuration information from this
area. The jumble of letters above is a regular expression defining
legal module names.
See the documentation of each module for details about its
variables.
The grammar of this section is dynamically modified based on its
name.
The following sections are valid on level 2:
++/[-_0-9a-zA-Z]+/
You can define multiple instances of the same probe with
subsections. These instances can have different values for
their variables, so you can eg. have one instance of the FPing
probe with packet size 1000 and step 300 and another instance
with packet size 64 and step 30. The name of the subsection
determines what the probe will be called, so you can write
descriptive names for the probes.
If there are any subsections defined, the main section for this
probe will just provide default parameter values for the probe
instances, ie. it will not become a probe instance itself.
The example above would be written like this:
*** Probes ***
+ FPing
# this value is common for the two subprobes
binary = /usr/bin/fping
++ FPingLarge
packetsize = 1000
step = 300
++ FPingSmall
packetsize = 64
step = 30
Dynamical grammar changes for example instances of this section:
AnotherCurl: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
binary
see above
Default value: binary = /usr/bin/curl
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
agent
(This variable can be overridden target-specifically in the
Targets section.)
extraargs
(This variable can be overridden target-specifically in the
Targets section.)
extrare
(This variable can be overridden target-specifically in the
Targets section.)
Default value: extrare = / /
follow_redirects
(This variable can be overridden target-specifically in the
Targets section.)
Default value: follow_redirects = no
include_redirects
(This variable can be overridden target-specifically in the
Targets section.)
Default value: include_redirects = no
insecure_ssl
(This variable can be overridden target-specifically in the
Targets section.)
interface
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
ssl2
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 10
urlformat
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
write_out
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: binary = /usr/bin/curl
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
agent
This variable inherits its value from the parent section
if nothing is specified here.
extraargs
This variable inherits its value from the parent section
if nothing is specified here.
extrare
This variable inherits its value from the parent section
if nothing is specified here.
Default value: extrare = / /
follow_redirects
This variable inherits its value from the parent section
if nothing is specified here.
Default value: follow_redirects = no
include_redirects
This variable inherits its value from the parent section
if nothing is specified here.
Default value: include_redirects = no
insecure_ssl
This variable inherits its value from the parent section
if nothing is specified here.
interface
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
ssl2
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 10
urlformat
This variable inherits its value from the parent section
if nothing is specified here.
write_out
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"AnotherCurl".)
AnotherDNS: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
authoritative
(This variable can be overridden target-specifically in the
Targets section.)
expect_text
(This variable can be overridden target-specifically in the
Targets section.)
ipversion
(This variable can be overridden target-specifically in the
Targets section.)
Default value: ipversion = 4
lookup
(This variable can be overridden target-specifically in the
Targets section.)
mininterval
(This variable can be overridden target-specifically in the
Targets section.)
Default value: mininterval = 0.5
pings
(This variable can be overridden target-specifically in the
Targets section.)
port
(This variable can be overridden target-specifically in the
Targets section.)
Default value: port = 53
protocol
(This variable can be overridden target-specifically in the
Targets section.)
Default value: protocol = udp
recordtype
(This variable can be overridden target-specifically in the
Targets section.)
Default value: recordtype = A
require_answers
(This variable can be overridden target-specifically in the
Targets section.)
require_noerror
(This variable can be overridden target-specifically in the
Targets section.)
require_nxdomain
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 5
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
authoritative
This variable inherits its value from the parent section
if nothing is specified here.
expect_text
This variable inherits its value from the parent section
if nothing is specified here.
ipversion
This variable inherits its value from the parent section
if nothing is specified here.
Default value: ipversion = 4
lookup
This variable inherits its value from the parent section
if nothing is specified here.
mininterval
This variable inherits its value from the parent section
if nothing is specified here.
Default value: mininterval = 0.5
pings
This variable inherits its value from the parent section
if nothing is specified here.
port
This variable inherits its value from the parent section
if nothing is specified here.
Default value: port = 53
protocol
This variable inherits its value from the parent section
if nothing is specified here.
Default value: protocol = udp
recordtype
This variable inherits its value from the parent section
if nothing is specified here.
Default value: recordtype = A
require_answers
This variable inherits its value from the parent section
if nothing is specified here.
require_noerror
This variable inherits its value from the parent section
if nothing is specified here.
require_nxdomain
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
(End of dynamical grammar changes for example instance
"AnotherDNS".)
AnotherSSH: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
greeting
(This variable can be overridden target-specifically in the
Targets section.)
Default value: greeting = SSH-Latency-Measurement-Sorry-for-
this-logmessage
interval
(This variable can be overridden target-specifically in the
Targets section.)
Default value: interval = established
mininterval
(This variable can be overridden target-specifically in the
Targets section.)
Default value: mininterval = 0.5
pings
(This variable can be overridden target-specifically in the
Targets section.)
port
(This variable can be overridden target-specifically in the
Targets section.)
Default value: port = 22
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 5
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
greeting
This variable inherits its value from the parent section
if nothing is specified here.
Default value: greeting = SSH-Latency-Measurement-Sorry-
for-this-logmessage
interval
This variable inherits its value from the parent section
if nothing is specified here.
Default value: interval = established
mininterval
This variable inherits its value from the parent section
if nothing is specified here.
Default value: mininterval = 0.5
pings
This variable inherits its value from the parent section
if nothing is specified here.
port
This variable inherits its value from the parent section
if nothing is specified here.
Default value: port = 22
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
(End of dynamical grammar changes for example instance
"AnotherSSH".)
CiscoRTTMonDNS: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
ioshost
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
iosint
(This variable can be overridden target-specifically in the
Targets section.)
name
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
pings
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 15
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
ioshost
This variable inherits its value from the parent section
if nothing is specified here.
iosint
This variable inherits its value from the parent section
if nothing is specified here.
name
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 15
(End of dynamical grammar changes for example instance
"CiscoRTTMonDNS".)
CiscoRTTMonEchoICMP: (See the separate module documentation for
details about each variable.)
The following new variables are valid:
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
ioshost
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
iosint
(This variable can be overridden target-specifically in the
Targets section.)
packetsize
(This variable can be overridden target-specifically in the
Targets section.)
Default value: packetsize = 56
pings
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 15
tos (This variable can be overridden target-specifically in the
Targets section.)
vrf (This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
ioshost
This variable inherits its value from the parent section
if nothing is specified here.
iosint
This variable inherits its value from the parent section
if nothing is specified here.
packetsize
This variable inherits its value from the parent section
if nothing is specified here.
Default value: packetsize = 56
pings
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 15
tos This variable inherits its value from the parent section
if nothing is specified here.
vrf This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"CiscoRTTMonEchoICMP".)
CiscoRTTMonTcpConnect: (See the separate module documentation for
details about each variable.)
The following new variables are valid:
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
ioshost
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
iosint
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
port
(This variable can be overridden target-specifically in the
Targets section.)
Default value: port = 80
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 15
tos (This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
ioshost
This variable inherits its value from the parent section
if nothing is specified here.
iosint
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
port
This variable inherits its value from the parent section
if nothing is specified here.
Default value: port = 80
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 15
tos This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"CiscoRTTMonTcpConnect".)
Curl: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
binary
see above
Default value: binary = /usr/bin/curl
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
agent
(This variable can be overridden target-specifically in the
Targets section.)
expect
(This variable can be overridden target-specifically in the
Targets section.)
extraargs
(This variable can be overridden target-specifically in the
Targets section.)
extrare
(This variable can be overridden target-specifically in the
Targets section.)
Default value: extrare = / /
follow_redirects
(This variable can be overridden target-specifically in the
Targets section.)
Default value: follow_redirects = no
include_redirects
(This variable can be overridden target-specifically in the
Targets section.)
Default value: include_redirects = no
insecure_ssl
(This variable can be overridden target-specifically in the
Targets section.)
interface
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
require_zero_status
(This variable can be overridden target-specifically in the
Targets section.)
Default value: require_zero_status = no
ssl2
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 10
urlformat
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: binary = /usr/bin/curl
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
agent
This variable inherits its value from the parent section
if nothing is specified here.
expect
This variable inherits its value from the parent section
if nothing is specified here.
extraargs
This variable inherits its value from the parent section
if nothing is specified here.
extrare
This variable inherits its value from the parent section
if nothing is specified here.
Default value: extrare = / /
follow_redirects
This variable inherits its value from the parent section
if nothing is specified here.
Default value: follow_redirects = no
include_redirects
This variable inherits its value from the parent section
if nothing is specified here.
Default value: include_redirects = no
insecure_ssl
This variable inherits its value from the parent section
if nothing is specified here.
interface
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
require_zero_status
This variable inherits its value from the parent section
if nothing is specified here.
Default value: require_zero_status = no
ssl2
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 10
urlformat
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance "Curl".)
DNS: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
binary (mandatory setting)
see above
forks
see above
Default value: forks = 5
offset
see above
step
see above
timeout
see above
Default value: timeout = 5
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
lookup
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
server
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
lookup
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
server
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance "DNS".)
DismanPing: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
offset
see above
pings
see above
Default value: pings = 15
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
ownerindex
(This variable can be overridden target-specifically in the
Targets section.)
packetsize
(This variable can be overridden target-specifically in the
Targets section.)
Default value: packetsize = 56
pinghost
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
pingsrc
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
pings
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: pings = 15
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
ownerindex
This variable inherits its value from the parent section
if nothing is specified here.
packetsize
This variable inherits its value from the parent section
if nothing is specified here.
Default value: packetsize = 56
pinghost
This variable inherits its value from the parent section
if nothing is specified here.
pingsrc
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"DismanPing".)
EchoPing: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
binary
see above
Default value: binary = /usr/bin/echoping
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
extraopts
(This variable can be overridden target-specifically in the
Targets section.)
fill
(This variable can be overridden target-specifically in the
Targets section.)
ipversion
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
priority
(This variable can be overridden target-specifically in the
Targets section.)
size
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 5
tos (This variable can be overridden target-specifically in the
Targets section.)
udp (This variable can be overridden target-specifically in the
Targets section.)
waittime
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: binary = /usr/bin/echoping
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
extraopts
This variable inherits its value from the parent section
if nothing is specified here.
fill
This variable inherits its value from the parent section
if nothing is specified here.
ipversion
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
priority
This variable inherits its value from the parent section
if nothing is specified here.
size
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
tos This variable inherits its value from the parent section
if nothing is specified here.
udp This variable inherits its value from the parent section
if nothing is specified here.
waittime
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"EchoPing".)
EchoPingChargen: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
binary
see above
Default value: binary = /usr/bin/echoping
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
extraopts
(This variable can be overridden target-specifically in the
Targets section.)
fill
(This variable can be overridden target-specifically in the
Targets section.)
ipversion
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
priority
(This variable can be overridden target-specifically in the
Targets section.)
size
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 5
tos (This variable can be overridden target-specifically in the
Targets section.)
waittime
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: binary = /usr/bin/echoping
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
extraopts
This variable inherits its value from the parent section
if nothing is specified here.
fill
This variable inherits its value from the parent section
if nothing is specified here.
ipversion
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
priority
This variable inherits its value from the parent section
if nothing is specified here.
size
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
tos This variable inherits its value from the parent section
if nothing is specified here.
waittime
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"EchoPingChargen".)
EchoPingDNS: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
binary
see above
Default value: binary = /usr/bin/echoping
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
dns_request
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
dns_tcp
(This variable can be overridden target-specifically in the
Targets section.)
dns_type
(This variable can be overridden target-specifically in the
Targets section.)
Default value: dns_type = A
extraopts
(This variable can be overridden target-specifically in the
Targets section.)
ipversion
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
plugin
(This variable can be overridden target-specifically in the
Targets section.)
Default value: plugin = dns
pluginargs
(This variable can be overridden target-specifically in the
Targets section.)
priority
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 5
tos (This variable can be overridden target-specifically in the
Targets section.)
waittime
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: binary = /usr/bin/echoping
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
dns_request
This variable inherits its value from the parent section
if nothing is specified here.
dns_tcp
This variable inherits its value from the parent section
if nothing is specified here.
dns_type
This variable inherits its value from the parent section
if nothing is specified here.
Default value: dns_type = A
extraopts
This variable inherits its value from the parent section
if nothing is specified here.
ipversion
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
plugin
This variable inherits its value from the parent section
if nothing is specified here.
Default value: plugin = dns
pluginargs
This variable inherits its value from the parent section
if nothing is specified here.
priority
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
tos This variable inherits its value from the parent section
if nothing is specified here.
waittime
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"EchoPingDNS".)
EchoPingDiscard: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
binary
see above
Default value: binary = /usr/bin/echoping
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
extraopts
(This variable can be overridden target-specifically in the
Targets section.)
fill
(This variable can be overridden target-specifically in the
Targets section.)
ipversion
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
priority
(This variable can be overridden target-specifically in the
Targets section.)
size
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 5
tos (This variable can be overridden target-specifically in the
Targets section.)
udp (This variable can be overridden target-specifically in the
Targets section.)
waittime
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: binary = /usr/bin/echoping
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
extraopts
This variable inherits its value from the parent section
if nothing is specified here.
fill
This variable inherits its value from the parent section
if nothing is specified here.
ipversion
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
priority
This variable inherits its value from the parent section
if nothing is specified here.
size
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
tos This variable inherits its value from the parent section
if nothing is specified here.
udp This variable inherits its value from the parent section
if nothing is specified here.
waittime
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"EchoPingDiscard".)
EchoPingHttp: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
binary
see above
Default value: binary = /usr/bin/echoping
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
accept_redirects
(This variable can be overridden target-specifically in the
Targets section.)
extraopts
(This variable can be overridden target-specifically in the
Targets section.)
ignore_cache
(This variable can be overridden target-specifically in the
Targets section.)
ipversion
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
port
(This variable can be overridden target-specifically in the
Targets section.)
priority
(This variable can be overridden target-specifically in the
Targets section.)
revalidate_data
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 10
tos (This variable can be overridden target-specifically in the
Targets section.)
url (This variable can be overridden target-specifically in the
Targets section.)
Default value: url = /
waittime
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: binary = /usr/bin/echoping
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
accept_redirects
This variable inherits its value from the parent section
if nothing is specified here.
extraopts
This variable inherits its value from the parent section
if nothing is specified here.
ignore_cache
This variable inherits its value from the parent section
if nothing is specified here.
ipversion
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
port
This variable inherits its value from the parent section
if nothing is specified here.
priority
This variable inherits its value from the parent section
if nothing is specified here.
revalidate_data
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 10
tos This variable inherits its value from the parent section
if nothing is specified here.
url This variable inherits its value from the parent section
if nothing is specified here.
Default value: url = /
waittime
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"EchoPingHttp".)
EchoPingHttps: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
binary
see above
Default value: binary = /usr/bin/echoping
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
accept_redirects
(This variable can be overridden target-specifically in the
Targets section.)
extraopts
(This variable can be overridden target-specifically in the
Targets section.)
ignore_cache
(This variable can be overridden target-specifically in the
Targets section.)
ipversion
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
port
(This variable can be overridden target-specifically in the
Targets section.)
priority
(This variable can be overridden target-specifically in the
Targets section.)
prot
(This variable can be overridden target-specifically in the
Targets section.)
Default value: prot = 443
revalidate_data
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 10
tos (This variable can be overridden target-specifically in the
Targets section.)
url (This variable can be overridden target-specifically in the
Targets section.)
Default value: url = /
waittime
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: binary = /usr/bin/echoping
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
accept_redirects
This variable inherits its value from the parent section
if nothing is specified here.
extraopts
This variable inherits its value from the parent section
if nothing is specified here.
ignore_cache
This variable inherits its value from the parent section
if nothing is specified here.
ipversion
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
port
This variable inherits its value from the parent section
if nothing is specified here.
priority
This variable inherits its value from the parent section
if nothing is specified here.
prot
This variable inherits its value from the parent section
if nothing is specified here.
Default value: prot = 443
revalidate_data
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 10
tos This variable inherits its value from the parent section
if nothing is specified here.
url This variable inherits its value from the parent section
if nothing is specified here.
Default value: url = /
waittime
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"EchoPingHttps".)
EchoPingIcp: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
binary
see above
Default value: binary = /usr/bin/echoping
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
extraopts
(This variable can be overridden target-specifically in the
Targets section.)
ipversion
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
priority
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 5
tos (This variable can be overridden target-specifically in the
Targets section.)
url (This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
waittime
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: binary = /usr/bin/echoping
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
extraopts
This variable inherits its value from the parent section
if nothing is specified here.
ipversion
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
priority
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
tos This variable inherits its value from the parent section
if nothing is specified here.
url This variable inherits its value from the parent section
if nothing is specified here.
waittime
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"EchoPingIcp".)
EchoPingLDAP: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
binary
see above
Default value: binary = /usr/bin/echoping
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
extraopts
(This variable can be overridden target-specifically in the
Targets section.)
ipversion
(This variable can be overridden target-specifically in the
Targets section.)
ldap_base
(This variable can be overridden target-specifically in the
Targets section.)
ldap_request
(This variable can be overridden target-specifically in the
Targets section.)
ldap_scope
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
plugin
(This variable can be overridden target-specifically in the
Targets section.)
Default value: plugin = ldap
pluginargs
(This variable can be overridden target-specifically in the
Targets section.)
priority
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 5
tos (This variable can be overridden target-specifically in the
Targets section.)
waittime
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: binary = /usr/bin/echoping
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
extraopts
This variable inherits its value from the parent section
if nothing is specified here.
ipversion
This variable inherits its value from the parent section
if nothing is specified here.
ldap_base
This variable inherits its value from the parent section
if nothing is specified here.
ldap_request
This variable inherits its value from the parent section
if nothing is specified here.
ldap_scope
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
plugin
This variable inherits its value from the parent section
if nothing is specified here.
Default value: plugin = ldap
pluginargs
This variable inherits its value from the parent section
if nothing is specified here.
priority
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
tos This variable inherits its value from the parent section
if nothing is specified here.
waittime
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"EchoPingLDAP".)
EchoPingPlugin: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
binary
see above
Default value: binary = /usr/bin/echoping
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
extraopts
(This variable can be overridden target-specifically in the
Targets section.)
ipversion
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
plugin
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
pluginargs
(This variable can be overridden target-specifically in the
Targets section.)
priority
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 5
tos (This variable can be overridden target-specifically in the
Targets section.)
waittime
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: binary = /usr/bin/echoping
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
extraopts
This variable inherits its value from the parent section
if nothing is specified here.
ipversion
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
plugin
This variable inherits its value from the parent section
if nothing is specified here.
pluginargs
This variable inherits its value from the parent section
if nothing is specified here.
priority
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
tos This variable inherits its value from the parent section
if nothing is specified here.
waittime
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"EchoPingPlugin".)
EchoPingSmtp: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
binary
see above
Default value: binary = /usr/bin/echoping
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
extraopts
(This variable can be overridden target-specifically in the
Targets section.)
ipversion
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
priority
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 5
tos (This variable can be overridden target-specifically in the
Targets section.)
waittime
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: binary = /usr/bin/echoping
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
extraopts
This variable inherits its value from the parent section
if nothing is specified here.
ipversion
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
priority
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
tos This variable inherits its value from the parent section
if nothing is specified here.
waittime
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"EchoPingSmtp".)
EchoPingWhois: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
binary
see above
Default value: binary = /usr/bin/echoping
forks
see above
Default value: forks = 5
offset
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
extraopts
(This variable can be overridden target-specifically in the
Targets section.)
ipversion
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
plugin
(This variable can be overridden target-specifically in the
Targets section.)
Default value: plugin = whois
pluginargs
(This variable can be overridden target-specifically in the
Targets section.)
priority
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 5
tos (This variable can be overridden target-specifically in the
Targets section.)
waittime
(This variable can be overridden target-specifically in the
Targets section.)
whois_request
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: binary = /usr/bin/echoping
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
extraopts
This variable inherits its value from the parent section
if nothing is specified here.
ipversion
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
plugin
This variable inherits its value from the parent section
if nothing is specified here.
Default value: plugin = whois
pluginargs
This variable inherits its value from the parent section
if nothing is specified here.
priority
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
tos This variable inherits its value from the parent section
if nothing is specified here.
waittime
This variable inherits its value from the parent section
if nothing is specified here.
whois_request
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"EchoPingWhois".)
FPing: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
binary (mandatory setting)
see above
blazemode
see above
hostinterval
see above
interface
see above
mininterval
see above
Default value: mininterval = 0.01
offset
see above
packetsize
see above
pings
see above
protocol
see above
sourceaddress
see above
step
see above
timeout
see above
tos see above
usestdout
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
blazemode
see above
This variable inherits its value from the parent section
if nothing is specified here.
hostinterval
see above
This variable inherits its value from the parent section
if nothing is specified here.
interface
see above
This variable inherits its value from the parent section
if nothing is specified here.
mininterval
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: mininterval = 0.01
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
packetsize
see above
This variable inherits its value from the parent section
if nothing is specified here.
pings
see above
This variable inherits its value from the parent section
if nothing is specified here.
protocol
see above
This variable inherits its value from the parent section
if nothing is specified here.
sourceaddress
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
tos see above
This variable inherits its value from the parent section
if nothing is specified here.
usestdout
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance "FPing".)
FPing6: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
binary (mandatory setting)
see above
blazemode
see above
hostinterval
see above
interface
see above
mininterval
see above
Default value: mininterval = 0.01
offset
see above
packetsize
see above
pings
see above
protocol
see above
Default value: protocol = 6
sourceaddress
see above
step
see above
timeout
see above
tos see above
usestdout
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
blazemode
see above
This variable inherits its value from the parent section
if nothing is specified here.
hostinterval
see above
This variable inherits its value from the parent section
if nothing is specified here.
interface
see above
This variable inherits its value from the parent section
if nothing is specified here.
mininterval
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: mininterval = 0.01
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
packetsize
see above
This variable inherits its value from the parent section
if nothing is specified here.
pings
see above
This variable inherits its value from the parent section
if nothing is specified here.
protocol
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: protocol = 6
sourceaddress
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
tos see above
This variable inherits its value from the parent section
if nothing is specified here.
usestdout
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"FPing6".)
FPingContinuous: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
binary (mandatory setting)
see above
hostinterval
see above
offset
see above
packetsize
see above
pings
see above
sourceaddress
see above
step
see above
timeout
see above
tos see above
usestdout
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
hostinterval
see above
This variable inherits its value from the parent section
if nothing is specified here.
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
packetsize
see above
This variable inherits its value from the parent section
if nothing is specified here.
pings
see above
This variable inherits its value from the parent section
if nothing is specified here.
sourceaddress
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
tos see above
This variable inherits its value from the parent section
if nothing is specified here.
usestdout
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"FPingContinuous".)
FTPtransfer: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
destfile
see above
forks
see above
Default value: forks = 5
min_interval
see above
Default value: min_interval = 1
mode (mandatory setting)
see above
offset
see above
passwordfile
see above
srcfile (mandatory setting)
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
localaddr
(This variable can be overridden target-specifically in the
Targets section.)
passive
(This variable can be overridden target-specifically in the
Targets section.)
password
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
port
(This variable can be overridden target-specifically in the
Targets section.)
timeout (mandatory setting)
(This variable can be overridden target-specifically in the
Targets section.)
username
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
destfile
see above
This variable inherits its value from the parent section
if nothing is specified here.
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
min_interval
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: min_interval = 1
mode (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
passwordfile
see above
This variable inherits its value from the parent section
if nothing is specified here.
srcfile (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
localaddr
This variable inherits its value from the parent section
if nothing is specified here.
passive
This variable inherits its value from the parent section
if nothing is specified here.
password
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
port
This variable inherits its value from the parent section
if nothing is specified here.
timeout (mandatory setting)
This variable inherits its value from the parent section
if nothing is specified here.
username
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"FTPtransfer".)
IOSPing: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
binary (mandatory setting)
see above
forks
see above
Default value: forks = 5
offset
see above
packetsize
see above
Default value: packetsize = 56
step
see above
timeout
see above
Default value: timeout = 5
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
ioshost
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
iosint
(This variable can be overridden target-specifically in the
Targets section.)
iosuser
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
packetsize
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: packetsize = 56
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
ioshost
This variable inherits its value from the parent section
if nothing is specified here.
iosint
This variable inherits its value from the parent section
if nothing is specified here.
iosuser
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"IOSPing".)
IRTT: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
binary (mandatory setting)
see above
Default value: binary = /usr/bin/irtt
forks
see above
Default value: forks = 5
offset
see above
step
see above
timeout
see above
Default value: timeout = 5
tmpdir
see above
Default value: tmpdir = /tmp/smokeping-irtt
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
dscp
(This variable can be overridden target-specifically in the
Targets section.)
extraargs
(This variable can be overridden target-specifically in the
Targets section.)
fill
(This variable can be overridden target-specifically in the
Targets section.)
hmac
(This variable can be overridden target-specifically in the
Targets section.)
interval
(This variable can be overridden target-specifically in the
Targets section.)
Default value: interval = 1
ipversion
(This variable can be overridden target-specifically in the
Targets section.)
length
(This variable can be overridden target-specifically in the
Targets section.)
localaddr
(This variable can be overridden target-specifically in the
Targets section.)
metric
(This variable can be overridden target-specifically in the
Targets section.)
Default value: metric = rtt
pings
(This variable can be overridden target-specifically in the
Targets section.)
readfrom
(This variable can be overridden target-specifically in the
Targets section.)
readfrompollinterval
(This variable can be overridden target-specifically in the
Targets section.)
Default value: readfrompollinterval = 5
serverfill
(This variable can be overridden target-specifically in the
Targets section.)
sleep
(This variable can be overridden target-specifically in the
Targets section.)
writeto
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: binary = /usr/bin/irtt
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
tmpdir
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: tmpdir = /tmp/smokeping-irtt
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
dscp
This variable inherits its value from the parent section
if nothing is specified here.
extraargs
This variable inherits its value from the parent section
if nothing is specified here.
fill
This variable inherits its value from the parent section
if nothing is specified here.
hmac
This variable inherits its value from the parent section
if nothing is specified here.
interval
This variable inherits its value from the parent section
if nothing is specified here.
Default value: interval = 1
ipversion
This variable inherits its value from the parent section
if nothing is specified here.
length
This variable inherits its value from the parent section
if nothing is specified here.
localaddr
This variable inherits its value from the parent section
if nothing is specified here.
metric
This variable inherits its value from the parent section
if nothing is specified here.
Default value: metric = rtt
pings
This variable inherits its value from the parent section
if nothing is specified here.
readfrom
This variable inherits its value from the parent section
if nothing is specified here.
readfrompollinterval
This variable inherits its value from the parent section
if nothing is specified here.
Default value: readfrompollinterval = 5
serverfill
This variable inherits its value from the parent section
if nothing is specified here.
sleep
This variable inherits its value from the parent section
if nothing is specified here.
writeto
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance "IRTT".)
LDAP: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
forks
see above
Default value: forks = 5
offset
see above
passwordfile
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
attrs
(This variable can be overridden target-specifically in the
Targets section.)
base
(This variable can be overridden target-specifically in the
Targets section.)
binddn
(This variable can be overridden target-specifically in the
Targets section.)
filter
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
mininterval
(This variable can be overridden target-specifically in the
Targets section.)
Default value: mininterval = 1
password
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
port
(This variable can be overridden target-specifically in the
Targets section.)
scheme
(This variable can be overridden target-specifically in the
Targets section.)
Default value: scheme = ldap
scope
(This variable can be overridden target-specifically in the
Targets section.)
Default value: scope = sub
start_tls
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 5
verify
(This variable can be overridden target-specifically in the
Targets section.)
Default value: verify = require
version
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
passwordfile
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
attrs
This variable inherits its value from the parent section
if nothing is specified here.
base
This variable inherits its value from the parent section
if nothing is specified here.
binddn
This variable inherits its value from the parent section
if nothing is specified here.
filter
This variable inherits its value from the parent section
if nothing is specified here.
mininterval
This variable inherits its value from the parent section
if nothing is specified here.
Default value: mininterval = 1
password
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
port
This variable inherits its value from the parent section
if nothing is specified here.
scheme
This variable inherits its value from the parent section
if nothing is specified here.
Default value: scheme = ldap
scope
This variable inherits its value from the parent section
if nothing is specified here.
Default value: scope = sub
start_tls
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
verify
This variable inherits its value from the parent section
if nothing is specified here.
Default value: verify = require
version
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance "LDAP".)
NFSping: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
binary (mandatory setting)
see above
blazemode
see above
hostinterval
see above
mininterval
see above
Default value: mininterval = 0.01
offset
see above
pings
see above
step
see above
tcp see above
timeout
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
blazemode
see above
This variable inherits its value from the parent section
if nothing is specified here.
hostinterval
see above
This variable inherits its value from the parent section
if nothing is specified here.
mininterval
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: mininterval = 0.01
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
pings
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
tcp see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"NFSping".)
OpenSSHEOSPing: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
forks
see above
Default value: forks = 5
offset
see above
packetsize
see above
Default value: packetsize = 100
step
see above
timeout
see above
Default value: timeout = 5
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
eospass
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
eosuser
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
pings
(This variable can be overridden target-specifically in the
Targets section.)
psource
(This variable can be overridden target-specifically in the
Targets section.)
source
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
unpriv
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
packetsize
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: packetsize = 100
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
eospass
This variable inherits its value from the parent section
if nothing is specified here.
eosuser
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
psource
This variable inherits its value from the parent section
if nothing is specified here.
source
This variable inherits its value from the parent section
if nothing is specified here.
unpriv
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"OpenSSHEOSPing".)
OpenSSHJunOSPing: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
forks
see above
Default value: forks = 5
offset
see above
packetsize
see above
Default value: packetsize = 100
step
see above
timeout
see above
Default value: timeout = 5
tos see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
junospass
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
junosuser
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
pings
(This variable can be overridden target-specifically in the
Targets section.)
psource
(This variable can be overridden target-specifically in the
Targets section.)
source
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
packetsize
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: packetsize = 100
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
tos see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
junospass
This variable inherits its value from the parent section
if nothing is specified here.
junosuser
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
psource
This variable inherits its value from the parent section
if nothing is specified here.
source
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"OpenSSHJunOSPing".)
Qstat: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
binary (mandatory setting)
see above
forks
see above
Default value: forks = 5
game
see above
Default value: game = q3s
mininterval
see above
Default value: mininterval = 0.5
offset
see above
port
see above
sourceaddress
see above
sourceport
see above
step
see above
timeout
see above
Default value: timeout = 5
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
game
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: game = q3s
mininterval
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: mininterval = 0.5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
port
see above
This variable inherits its value from the parent section
if nothing is specified here.
sourceaddress
see above
This variable inherits its value from the parent section
if nothing is specified here.
sourceport
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance "Qstat".)
Radius: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
forks
see above
Default value: forks = 5
offset
see above
passwordfile
see above
secretfile
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
allowreject
(This variable can be overridden target-specifically in the
Targets section.)
mininterval
(This variable can be overridden target-specifically in the
Targets section.)
Default value: mininterval = 1
nas_ip_address
(This variable can be overridden target-specifically in the
Targets section.)
password
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
port
(This variable can be overridden target-specifically in the
Targets section.)
secret
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 5
username
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
passwordfile
see above
This variable inherits its value from the parent section
if nothing is specified here.
secretfile
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
allowreject
This variable inherits its value from the parent section
if nothing is specified here.
mininterval
This variable inherits its value from the parent section
if nothing is specified here.
Default value: mininterval = 1
nas_ip_address
This variable inherits its value from the parent section
if nothing is specified here.
password
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
port
This variable inherits its value from the parent section
if nothing is specified here.
secret
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
username
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"Radius".)
RemoteFPing: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
binary (mandatory setting)
see above
blazemode
see above
hostinterval
see above
interface
see above
mininterval
see above
Default value: mininterval = 0.01
offset
see above
packetsize
see above
pings
see above
protocol
see above
rbinary (mandatory setting)
see above
rhost (mandatory setting)
see above
rport
see above
ruser
see above
sourceaddress
see above
step
see above
timeout
see above
tos see above
usestdout
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
blazemode
see above
This variable inherits its value from the parent section
if nothing is specified here.
hostinterval
see above
This variable inherits its value from the parent section
if nothing is specified here.
interface
see above
This variable inherits its value from the parent section
if nothing is specified here.
mininterval
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: mininterval = 0.01
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
packetsize
see above
This variable inherits its value from the parent section
if nothing is specified here.
pings
see above
This variable inherits its value from the parent section
if nothing is specified here.
protocol
see above
This variable inherits its value from the parent section
if nothing is specified here.
rbinary (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
rhost (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
rport
see above
This variable inherits its value from the parent section
if nothing is specified here.
ruser
see above
This variable inherits its value from the parent section
if nothing is specified here.
sourceaddress
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
tos see above
This variable inherits its value from the parent section
if nothing is specified here.
usestdout
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"RemoteFPing".)
SSH: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
binary (mandatory setting)
see above
forks
see above
Default value: forks = 5
offset
see above
step
see above
timeout
see above
Default value: timeout = 5
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
keytype
(This variable can be overridden target-specifically in the
Targets section.)
Default value: keytype = rsa
pings
(This variable can be overridden target-specifically in the
Targets section.)
port
(This variable can be overridden target-specifically in the
Targets section.)
Default value: port = 22
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
keytype
This variable inherits its value from the parent section
if nothing is specified here.
Default value: keytype = rsa
pings
This variable inherits its value from the parent section
if nothing is specified here.
port
This variable inherits its value from the parent section
if nothing is specified here.
Default value: port = 22
(End of dynamical grammar changes for example instance "SSH".)
SendEmail: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
bodysize
see above
forks
see above
Default value: forks = 5
from (mandatory setting)
see above
offset
see above
step
see above
subject
see above
Default value: subject = Test
timeout
see above
Default value: timeout = 5
to (mandatory setting)
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
port
(This variable can be overridden target-specifically in the
Targets section.)
Default value: port = 25
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
bodysize
see above
This variable inherits its value from the parent section
if nothing is specified here.
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
from (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
subject
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: subject = Test
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
to (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
port
This variable inherits its value from the parent section
if nothing is specified here.
Default value: port = 25
(End of dynamical grammar changes for example instance
"SendEmail".)
SipSak: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
binary
see above
Default value: binary = /usr/bin/sipsak
forks
see above
Default value: forks = 5
offset
see above
step
see above
timeout
see above
Default value: timeout = 5
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
keep_second
(This variable can be overridden target-specifically in the
Targets section.)
params
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
port
(This variable can be overridden target-specifically in the
Targets section.)
sipsak_timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: sipsak_timeout = 2
user
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: binary = /usr/bin/sipsak
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
keep_second
This variable inherits its value from the parent section
if nothing is specified here.
params
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
port
This variable inherits its value from the parent section
if nothing is specified here.
sipsak_timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: sipsak_timeout = 2
user
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"SipSak".)
TCPPing: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
binary (mandatory setting)
see above
forks
see above
Default value: forks = 5
offset
see above
step
see above
timeout
see above
Default value: timeout = 5
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
port
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
port
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"TCPPing".)
TacacsPlus: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
forks
see above
Default value: forks = 5
offset
see above
passwordfile
see above
secretfile
see above
step
see above
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
authtype
(This variable can be overridden target-specifically in the
Targets section.)
Default value: authtype = ASCII
mininterval
(This variable can be overridden target-specifically in the
Targets section.)
Default value: mininterval = 1
password
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
port
(This variable can be overridden target-specifically in the
Targets section.)
Default value: port = 49
secret
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 5
username
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
passwordfile
see above
This variable inherits its value from the parent section
if nothing is specified here.
secretfile
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
authtype
This variable inherits its value from the parent section
if nothing is specified here.
Default value: authtype = ASCII
mininterval
This variable inherits its value from the parent section
if nothing is specified here.
Default value: mininterval = 1
password
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
port
This variable inherits its value from the parent section
if nothing is specified here.
Default value: port = 49
secret
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
username
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"TacacsPlus".)
TelnetIOSPing: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
forks
see above
Default value: forks = 5
offset
see above
packetsize
see above
Default value: packetsize = 56
step
see above
timeout
see above
Default value: timeout = 5
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
iospass
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
iosuser
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
pings
(This variable can be overridden target-specifically in the
Targets section.)
psource
(This variable can be overridden target-specifically in the
Targets section.)
source
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
vrf (This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
packetsize
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: packetsize = 56
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
iospass
This variable inherits its value from the parent section
if nothing is specified here.
iosuser
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
psource
This variable inherits its value from the parent section
if nothing is specified here.
source
This variable inherits its value from the parent section
if nothing is specified here.
vrf This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"TelnetIOSPing".)
TelnetJunOSPing: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
forks
see above
Default value: forks = 5
offset
see above
packetsize
see above
Default value: packetsize = 100
step
see above
timeout
see above
Default value: timeout = 5
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
junospass
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
junosuser
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
pings
(This variable can be overridden target-specifically in the
Targets section.)
psource
(This variable can be overridden target-specifically in the
Targets section.)
source
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
packetsize
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: packetsize = 100
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
junospass
This variable inherits its value from the parent section
if nothing is specified here.
junosuser
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
psource
This variable inherits its value from the parent section
if nothing is specified here.
source
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"TelnetJunOSPing".)
TraceroutePing: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
binary (mandatory setting)
see above
binaryv6
see above
forks
see above
Default value: forks = 5
offset
see above
step
see above
timeout
see above
Default value: timeout = 5
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
desthost
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
host
(This variable can be overridden target-specifically in the
Targets section.)
This variable dynamically modifies the grammar based on its
value.
maxttl
(This variable can be overridden target-specifically in the
Targets section.)
minttl
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
wait
(This variable can be overridden target-specifically in the
Targets section.)
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
binary (mandatory setting)
see above
This variable inherits its value from the parent section
if nothing is specified here.
binaryv6
see above
This variable inherits its value from the parent section
if nothing is specified here.
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
timeout
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 5
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
desthost
This variable inherits its value from the parent section
if nothing is specified here.
host
This variable inherits its value from the parent section
if nothing is specified here.
maxttl
This variable inherits its value from the parent section
if nothing is specified here.
minttl
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
wait
This variable inherits its value from the parent section
if nothing is specified here.
(End of dynamical grammar changes for example instance
"TraceroutePing".)
WebProxyFilter: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
forks
see above
Default value: forks = 5
maxsize
see above
Default value: maxsize = 2000
min_interval
see above
Default value: min_interval = 1
offset
see above
step
see above
useragent
see above
Default value: useragent = SmokePing/2.x (WebProxyFilter
Probe)
/^influx_.+/
(This variable can be overridden target-specifically in the
Targets section.)
deny_re (mandatory setting)
(This variable can be overridden target-specifically in the
Targets section.)
more_hosts
(This variable can be overridden target-specifically in the
Targets section.)
pings
(This variable can be overridden target-specifically in the
Targets section.)
timeout
(This variable can be overridden target-specifically in the
Targets section.)
Default value: timeout = 2
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
forks
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: forks = 5
maxsize
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: maxsize = 2000
min_interval
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: min_interval = 1
offset
see above
This variable inherits its value from the parent section
if nothing is specified here.
step
see above
This variable inherits its value from the parent section
if nothing is specified here.
useragent
see above
This variable inherits its value from the parent section
if nothing is specified here.
Default value: useragent = SmokePing/2.x (WebProxyFilter
Probe)
/^influx_.+/
This variable inherits its value from the parent section
if nothing is specified here.
deny_re (mandatory setting)
This variable inherits its value from the parent section
if nothing is specified here.
more_hosts
This variable inherits its value from the parent section
if nothing is specified here.
pings
This variable inherits its value from the parent section
if nothing is specified here.
timeout
This variable inherits its value from the parent section
if nothing is specified here.
Default value: timeout = 2
(End of dynamical grammar changes for example instance
"WebProxyFilter".)
(End of dynamical grammar changes for example instances of section
"/[-_0-9a-zA-Z]+/".)
*** Targets *** (mandatory section)
The Target Section defines the actual work of SmokePing. It contains a
hierarchical list of hosts which mark the endpoints of the network
connections the system should monitor. Each section can contain one host
as well as other sections. By adding slaves you can measure the
connection to an endpoint from multiple locations.
The following variables can be set in this section:
probe (mandatory setting)
The name of the probe module to be used for this host. The value of
this variable gets propagated
This variable dynamically modifies the grammar based on its value.
menu (mandatory setting)
Menu entry for this section. If not set this will be set to the
hostname.
title (mandatory setting)
Title of the page when it is displayed. This will be set to the
hostname if left empty.
remark
An optional remark on the current section. It gets displayed on the
webpage.
alerts
A comma separated list of alerts to check for this target. The
alerts have to be setup in the Alerts section. Alerts are inherited
by child nodes. Use an empty alerts definition to remove inherited
alerts from the current target and its children.
slaves
List of slave servers. It gets inherited by all targets.
menuextra
HTML String to be added to the end of each menu entry. The "{HOST}"
entry will be replaced by the host property of the relevant section.
The "{CLASS}" entry will be replaced by the same class as the other
tags in the manu line.
parents
The following sections are valid on level 1:
+/[-_0-9a-zA-Z]+/
Each target section can contain information about a host to monitor
as well as further target sections. Most variables have already been
described above. The expression above defines legal names for target
sections.
This section is recursive: it can contain subsection(s) with the
same syntax.
The following variables can be set in this section:
probe
This variable inherits its value from the parent section if
nothing is specified here.
This variable dynamically modifies the grammar based on its
value.
menu
title
alerts
Comma separated list of alert names
This variable inherits its value from the parent section if
nothing is specified here.
note
Some information about this entry which does NOT get displayed
on the web.
email
This is the contact address for the owner of the current host.
In connection with the DYNAMIC hosts, the address will be used
for sending the belowmentioned script.
host
There are three types of "hosts" in smokeping.
1. The 'hostname' is a name of a host you want to target from
smokeping
2. The string DYNAMIC. Is for machines that have a dynamic IP
address. These boxes are required to regularly contact the
SmokePing server to confirm their IP address.
When starting SmokePing with the commandline argument
--email it will add a secret password to each of the DYNAMIC
host lines and send a script to the owner of each host. This
script must be started periodically (cron) on the host in
question to let smokeping know where the host is currently
located. If the target machine supports SNMP SmokePing will
also query the hosts sysContact, sysName and sysLocation
properties to make sure it is still the same host.
3. A space separated list of 'target-path' entries (multihost
target). All targets mentioned in this list will be
displayed in one graph. Note that the graph will look
different from the normal smokeping graphs. The syntax for
multihost targets is as follows:
host = /world/town/host1 /world/town2/host33 /world/town2/host1~slave
remark
rawlog
Log the raw data, gathered for this target, in tab separated
format, to a file with the same basename as the corresponding
RRD file. Use posix strftime to format the timestamp to be put
into the file name. The filename is built like this:
basename.strftime.csv
Example:
rawlog=%Y-%m-%d
this would create a new logfile every day with a name like this:
targethost.2004-05-03.csv
alertee
If you want to have alerts for this target and all targets below
it go to a particular address on top of the address already
specified in the alert, you can add it here. This can be a comma
separated list of items.
This variable inherits its value from the parent section if
nothing is specified here.
slaves
The slave names must match the slaves you have setup in the
slaves section.
This variable inherits its value from the parent section if
nothing is specified here.
menuextra
HTML String to be added to the end of each menu entry. The
following tags will be replaced:
{HOST} -> #$hostname
{HOSTNAME} -> $hostname
{CLASS} -> same class as the other tags in the menu line
{HASH} -> #
This variable inherits its value from the parent section if
nothing is specified here.
parents
After setting up a hierarchy in the Presentation section of the
configuration file you can use this property to assign an entry
to alternate hierarchies. The format for parent entries is.
hierarchyA:/Node1/Node2 hierarchyB:/Node3
The entries from all parent properties together will build a new
tree for each hierarchy. With this method it is possible to make
a single target show up multiple times in a tree. If you think
this is a good thing, go ahead, nothing is stopping you. Since
you do not only define the parent but the full path of the
parent node, circular dependencies are not possible.
hide
Set the hide property to 'yes' to hide this host from the
navigation menu and from search results. Note that if you set
the hide property on a non leaf entry all subordinate entries
will also disappear in the menu structure. If you know a direct
link to a page it is still accessible. Pages which are hidden
from the menu due to a parent being hidden will still show up in
search results and in alternate hierarchies where they are below
a non hidden parent.
Default value: hide = no
nomasterpoll
Use this in a master/slave setup where the master must not poll
a particular target. The master will now skip this entry in its
polling cycle. Note that if you set the hide property on a non
leaf entry all subordinate entries will also disappear in the
menu structure. You can still access them via direct link or via
an alternate hierarchy.
If you have no master/slave setup this will have a similar
effect to the hide property, except that the menu entry will
still show up, but will not contain any graphs.
This variable inherits its value from the parent section if
nothing is specified here.
Default value: nomasterpoll = no
The following sections are valid on level 2:
++/[-_0-9a-zA-Z]+/
This section is recursive: it can contain subsection(s) with the
same syntax.
Dynamical grammar changes for example values of variable "probe":
AnotherCurl: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
agent
see above
extraargs
see above
extrare
see above
follow_redirects
see above
include_redirects
see above
insecure_ssl
see above
interface
see above
pings
see above
ssl2
see above
timeout
see above
urlformat
see above
write_out
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
agent
see above
This variable inherits its value from the parent section if
nothing is specified here.
extraargs
see above
This variable inherits its value from the parent section if
nothing is specified here.
extrare
see above
This variable inherits its value from the parent section if
nothing is specified here.
follow_redirects
see above
This variable inherits its value from the parent section if
nothing is specified here.
include_redirects
see above
This variable inherits its value from the parent section if
nothing is specified here.
insecure_ssl
see above
This variable inherits its value from the parent section if
nothing is specified here.
interface
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
ssl2
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
urlformat
see above
This variable inherits its value from the parent section if
nothing is specified here.
write_out
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"AnotherCurl".)
AnotherDNS: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
authoritative
see above
expect_text
see above
ipversion
see above
lookup
see above
mininterval
see above
pings
see above
port
see above
protocol
see above
recordtype
see above
require_answers
see above
require_noerror
see above
require_nxdomain
see above
timeout
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
authoritative
see above
This variable inherits its value from the parent section if
nothing is specified here.
expect_text
see above
This variable inherits its value from the parent section if
nothing is specified here.
ipversion
see above
This variable inherits its value from the parent section if
nothing is specified here.
lookup
see above
This variable inherits its value from the parent section if
nothing is specified here.
mininterval
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
port
see above
This variable inherits its value from the parent section if
nothing is specified here.
protocol
see above
This variable inherits its value from the parent section if
nothing is specified here.
recordtype
see above
This variable inherits its value from the parent section if
nothing is specified here.
require_answers
see above
This variable inherits its value from the parent section if
nothing is specified here.
require_noerror
see above
This variable inherits its value from the parent section if
nothing is specified here.
require_nxdomain
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"AnotherDNS".)
AnotherSSH: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
greeting
see above
interval
see above
mininterval
see above
pings
see above
port
see above
timeout
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
greeting
see above
This variable inherits its value from the parent section if
nothing is specified here.
interval
see above
This variable inherits its value from the parent section if
nothing is specified here.
mininterval
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
port
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"AnotherSSH".)
CiscoRTTMonDNS: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
ioshost
see above
iosint
see above
name
see above
pings
see above
timeout
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
ioshost
see above
This variable inherits its value from the parent section if
nothing is specified here.
iosint
see above
This variable inherits its value from the parent section if
nothing is specified here.
name
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"CiscoRTTMonDNS".)
CiscoRTTMonEchoICMP: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
/^influx_.+/
see above
ioshost
see above
iosint
see above
packetsize
see above
pings
see above
timeout
see above
tos see above
vrf see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
ioshost
see above
This variable inherits its value from the parent section if
nothing is specified here.
iosint
see above
This variable inherits its value from the parent section if
nothing is specified here.
packetsize
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
tos see above
This variable inherits its value from the parent section if
nothing is specified here.
vrf see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"CiscoRTTMonEchoICMP".)
CiscoRTTMonTcpConnect: (See the separate module documentation for
details about each variable.)
The following new variables are valid:
/^influx_.+/
see above
ioshost
see above
iosint
see above
pings
see above
port
see above
timeout
see above
tos see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
ioshost
see above
This variable inherits its value from the parent section if
nothing is specified here.
iosint
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
port
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
tos see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"CiscoRTTMonTcpConnect".)
Curl: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
/^influx_.+/
see above
agent
see above
expect
see above
extraargs
see above
extrare
see above
follow_redirects
see above
include_redirects
see above
insecure_ssl
see above
interface
see above
pings
see above
require_zero_status
see above
ssl2
see above
timeout
see above
urlformat
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
agent
see above
This variable inherits its value from the parent section if
nothing is specified here.
expect
see above
This variable inherits its value from the parent section if
nothing is specified here.
extraargs
see above
This variable inherits its value from the parent section if
nothing is specified here.
extrare
see above
This variable inherits its value from the parent section if
nothing is specified here.
follow_redirects
see above
This variable inherits its value from the parent section if
nothing is specified here.
include_redirects
see above
This variable inherits its value from the parent section if
nothing is specified here.
insecure_ssl
see above
This variable inherits its value from the parent section if
nothing is specified here.
interface
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
require_zero_status
see above
This variable inherits its value from the parent section if
nothing is specified here.
ssl2
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
urlformat
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"Curl".)
DNS: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
/^influx_.+/
see above
lookup
see above
pings
see above
server
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
lookup
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
server
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"DNS".)
DismanPing: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
ownerindex
see above
packetsize
see above
pinghost
see above
pingsrc
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
ownerindex
see above
This variable inherits its value from the parent section if
nothing is specified here.
packetsize
see above
This variable inherits its value from the parent section if
nothing is specified here.
pinghost
see above
This variable inherits its value from the parent section if
nothing is specified here.
pingsrc
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"DismanPing".)
EchoPing: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
/^influx_.+/
see above
extraopts
see above
fill
see above
ipversion
see above
pings
see above
priority
see above
size
see above
timeout
see above
tos see above
udp see above
waittime
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
extraopts
see above
This variable inherits its value from the parent section if
nothing is specified here.
fill
see above
This variable inherits its value from the parent section if
nothing is specified here.
ipversion
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
priority
see above
This variable inherits its value from the parent section if
nothing is specified here.
size
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
tos see above
This variable inherits its value from the parent section if
nothing is specified here.
udp see above
This variable inherits its value from the parent section if
nothing is specified here.
waittime
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"EchoPing".)
EchoPingChargen: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
/^influx_.+/
see above
extraopts
see above
fill
see above
ipversion
see above
pings
see above
priority
see above
size
see above
timeout
see above
tos see above
waittime
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
extraopts
see above
This variable inherits its value from the parent section if
nothing is specified here.
fill
see above
This variable inherits its value from the parent section if
nothing is specified here.
ipversion
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
priority
see above
This variable inherits its value from the parent section if
nothing is specified here.
size
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
tos see above
This variable inherits its value from the parent section if
nothing is specified here.
waittime
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"EchoPingChargen".)
EchoPingDNS: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
dns_request
see above
dns_tcp
see above
dns_type
see above
extraopts
see above
ipversion
see above
pings
see above
plugin
see above
pluginargs
see above
priority
see above
timeout
see above
tos see above
waittime
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
dns_request
see above
This variable inherits its value from the parent section if
nothing is specified here.
dns_tcp
see above
This variable inherits its value from the parent section if
nothing is specified here.
dns_type
see above
This variable inherits its value from the parent section if
nothing is specified here.
extraopts
see above
This variable inherits its value from the parent section if
nothing is specified here.
ipversion
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
plugin
see above
This variable inherits its value from the parent section if
nothing is specified here.
pluginargs
see above
This variable inherits its value from the parent section if
nothing is specified here.
priority
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
tos see above
This variable inherits its value from the parent section if
nothing is specified here.
waittime
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"EchoPingDNS".)
EchoPingDiscard: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
/^influx_.+/
see above
extraopts
see above
fill
see above
ipversion
see above
pings
see above
priority
see above
size
see above
timeout
see above
tos see above
udp see above
waittime
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
extraopts
see above
This variable inherits its value from the parent section if
nothing is specified here.
fill
see above
This variable inherits its value from the parent section if
nothing is specified here.
ipversion
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
priority
see above
This variable inherits its value from the parent section if
nothing is specified here.
size
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
tos see above
This variable inherits its value from the parent section if
nothing is specified here.
udp see above
This variable inherits its value from the parent section if
nothing is specified here.
waittime
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"EchoPingDiscard".)
EchoPingHttp: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
accept_redirects
see above
extraopts
see above
ignore_cache
see above
ipversion
see above
pings
see above
port
see above
priority
see above
revalidate_data
see above
timeout
see above
tos see above
url see above
waittime
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
accept_redirects
see above
This variable inherits its value from the parent section if
nothing is specified here.
extraopts
see above
This variable inherits its value from the parent section if
nothing is specified here.
ignore_cache
see above
This variable inherits its value from the parent section if
nothing is specified here.
ipversion
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
port
see above
This variable inherits its value from the parent section if
nothing is specified here.
priority
see above
This variable inherits its value from the parent section if
nothing is specified here.
revalidate_data
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
tos see above
This variable inherits its value from the parent section if
nothing is specified here.
url see above
This variable inherits its value from the parent section if
nothing is specified here.
waittime
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"EchoPingHttp".)
EchoPingHttps: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
accept_redirects
see above
extraopts
see above
ignore_cache
see above
ipversion
see above
pings
see above
port
see above
priority
see above
prot
see above
revalidate_data
see above
timeout
see above
tos see above
url see above
waittime
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
accept_redirects
see above
This variable inherits its value from the parent section if
nothing is specified here.
extraopts
see above
This variable inherits its value from the parent section if
nothing is specified here.
ignore_cache
see above
This variable inherits its value from the parent section if
nothing is specified here.
ipversion
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
port
see above
This variable inherits its value from the parent section if
nothing is specified here.
priority
see above
This variable inherits its value from the parent section if
nothing is specified here.
prot
see above
This variable inherits its value from the parent section if
nothing is specified here.
revalidate_data
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
tos see above
This variable inherits its value from the parent section if
nothing is specified here.
url see above
This variable inherits its value from the parent section if
nothing is specified here.
waittime
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"EchoPingHttps".)
EchoPingIcp: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
extraopts
see above
ipversion
see above
pings
see above
priority
see above
timeout
see above
tos see above
url see above
waittime
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
extraopts
see above
This variable inherits its value from the parent section if
nothing is specified here.
ipversion
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
priority
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
tos see above
This variable inherits its value from the parent section if
nothing is specified here.
url see above
This variable inherits its value from the parent section if
nothing is specified here.
waittime
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"EchoPingIcp".)
EchoPingLDAP: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
extraopts
see above
ipversion
see above
ldap_base
see above
ldap_request
see above
ldap_scope
see above
pings
see above
plugin
see above
pluginargs
see above
priority
see above
timeout
see above
tos see above
waittime
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
extraopts
see above
This variable inherits its value from the parent section if
nothing is specified here.
ipversion
see above
This variable inherits its value from the parent section if
nothing is specified here.
ldap_base
see above
This variable inherits its value from the parent section if
nothing is specified here.
ldap_request
see above
This variable inherits its value from the parent section if
nothing is specified here.
ldap_scope
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
plugin
see above
This variable inherits its value from the parent section if
nothing is specified here.
pluginargs
see above
This variable inherits its value from the parent section if
nothing is specified here.
priority
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
tos see above
This variable inherits its value from the parent section if
nothing is specified here.
waittime
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"EchoPingLDAP".)
EchoPingPlugin: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
extraopts
see above
ipversion
see above
pings
see above
plugin
see above
pluginargs
see above
priority
see above
timeout
see above
tos see above
waittime
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
extraopts
see above
This variable inherits its value from the parent section if
nothing is specified here.
ipversion
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
plugin
see above
This variable inherits its value from the parent section if
nothing is specified here.
pluginargs
see above
This variable inherits its value from the parent section if
nothing is specified here.
priority
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
tos see above
This variable inherits its value from the parent section if
nothing is specified here.
waittime
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"EchoPingPlugin".)
EchoPingSmtp: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
extraopts
see above
ipversion
see above
pings
see above
priority
see above
timeout
see above
tos see above
waittime
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
extraopts
see above
This variable inherits its value from the parent section if
nothing is specified here.
ipversion
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
priority
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
tos see above
This variable inherits its value from the parent section if
nothing is specified here.
waittime
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"EchoPingSmtp".)
EchoPingWhois: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
extraopts
see above
ipversion
see above
pings
see above
plugin
see above
pluginargs
see above
priority
see above
timeout
see above
tos see above
waittime
see above
whois_request
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
extraopts
see above
This variable inherits its value from the parent section if
nothing is specified here.
ipversion
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
plugin
see above
This variable inherits its value from the parent section if
nothing is specified here.
pluginargs
see above
This variable inherits its value from the parent section if
nothing is specified here.
priority
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
tos see above
This variable inherits its value from the parent section if
nothing is specified here.
waittime
see above
This variable inherits its value from the parent section if
nothing is specified here.
whois_request
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"EchoPingWhois".)
FPing: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
/^influx_.+/
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"FPing".)
FPing6: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
/^influx_.+/
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"FPing6".)
FPingContinuous: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
/^influx_.+/
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"FPingContinuous".)
FTPtransfer: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
localaddr
see above
passive
see above
password
see above
pings
see above
port
see above
timeout
see above
username
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
localaddr
see above
This variable inherits its value from the parent section if
nothing is specified here.
passive
see above
This variable inherits its value from the parent section if
nothing is specified here.
password
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
port
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
username
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"FTPtransfer".)
IOSPing: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
/^influx_.+/
see above
ioshost
see above
iosint
see above
iosuser
see above
pings
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
ioshost
see above
This variable inherits its value from the parent section if
nothing is specified here.
iosint
see above
This variable inherits its value from the parent section if
nothing is specified here.
iosuser
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"IOSPing".)
IRTT: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
/^influx_.+/
see above
dscp
see above
extraargs
see above
fill
see above
hmac
see above
interval
see above
ipversion
see above
length
see above
localaddr
see above
metric
see above
pings
see above
readfrom
see above
readfrompollinterval
see above
serverfill
see above
sleep
see above
writeto
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
dscp
see above
This variable inherits its value from the parent section if
nothing is specified here.
extraargs
see above
This variable inherits its value from the parent section if
nothing is specified here.
fill
see above
This variable inherits its value from the parent section if
nothing is specified here.
hmac
see above
This variable inherits its value from the parent section if
nothing is specified here.
interval
see above
This variable inherits its value from the parent section if
nothing is specified here.
ipversion
see above
This variable inherits its value from the parent section if
nothing is specified here.
length
see above
This variable inherits its value from the parent section if
nothing is specified here.
localaddr
see above
This variable inherits its value from the parent section if
nothing is specified here.
metric
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
readfrom
see above
This variable inherits its value from the parent section if
nothing is specified here.
readfrompollinterval
see above
This variable inherits its value from the parent section if
nothing is specified here.
serverfill
see above
This variable inherits its value from the parent section if
nothing is specified here.
sleep
see above
This variable inherits its value from the parent section if
nothing is specified here.
writeto
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"IRTT".)
LDAP: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
/^influx_.+/
see above
attrs
see above
base
see above
binddn
see above
filter
see above
mininterval
see above
password
see above
pings
see above
port
see above
scheme
see above
scope
see above
start_tls
see above
timeout
see above
verify
see above
version
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
attrs
see above
This variable inherits its value from the parent section if
nothing is specified here.
base
see above
This variable inherits its value from the parent section if
nothing is specified here.
binddn
see above
This variable inherits its value from the parent section if
nothing is specified here.
filter
see above
This variable inherits its value from the parent section if
nothing is specified here.
mininterval
see above
This variable inherits its value from the parent section if
nothing is specified here.
password
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
port
see above
This variable inherits its value from the parent section if
nothing is specified here.
scheme
see above
This variable inherits its value from the parent section if
nothing is specified here.
scope
see above
This variable inherits its value from the parent section if
nothing is specified here.
start_tls
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
verify
see above
This variable inherits its value from the parent section if
nothing is specified here.
version
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"LDAP".)
NFSping: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
/^influx_.+/
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"NFSping".)
OpenSSHEOSPing: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
eospass
see above
eosuser
see above
pings
see above
psource
see above
source
see above
unpriv
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
eospass
see above
This variable inherits its value from the parent section if
nothing is specified here.
eosuser
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
psource
see above
This variable inherits its value from the parent section if
nothing is specified here.
source
see above
This variable inherits its value from the parent section if
nothing is specified here.
unpriv
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"OpenSSHEOSPing".)
OpenSSHJunOSPing: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
/^influx_.+/
see above
junospass
see above
junosuser
see above
pings
see above
psource
see above
source
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
junospass
see above
This variable inherits its value from the parent section if
nothing is specified here.
junosuser
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
psource
see above
This variable inherits its value from the parent section if
nothing is specified here.
source
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"OpenSSHJunOSPing".)
Qstat: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
/^influx_.+/
see above
pings
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"Qstat".)
Radius: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
/^influx_.+/
see above
allowreject
see above
mininterval
see above
nas_ip_address
see above
password
see above
pings
see above
port
see above
secret
see above
timeout
see above
username
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
allowreject
see above
This variable inherits its value from the parent section if
nothing is specified here.
mininterval
see above
This variable inherits its value from the parent section if
nothing is specified here.
nas_ip_address
see above
This variable inherits its value from the parent section if
nothing is specified here.
password
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
port
see above
This variable inherits its value from the parent section if
nothing is specified here.
secret
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
username
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"Radius".)
RemoteFPing: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"RemoteFPing".)
SSH: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
/^influx_.+/
see above
keytype
see above
pings
see above
port
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
keytype
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
port
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"SSH".)
SendEmail: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
/^influx_.+/
see above
pings
see above
port
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
port
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"SendEmail".)
SipSak: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
/^influx_.+/
see above
keep_second
see above
params
see above
pings
see above
port
see above
sipsak_timeout
see above
user
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
keep_second
see above
This variable inherits its value from the parent section if
nothing is specified here.
params
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
port
see above
This variable inherits its value from the parent section if
nothing is specified here.
sipsak_timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
user
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"SipSak".)
TCPPing: (See the separate module documentation for details about each
variable.)
The following new variables are valid:
/^influx_.+/
see above
pings
see above
port
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
port
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"TCPPing".)
TacacsPlus: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
authtype
see above
mininterval
see above
password
see above
pings
see above
port
see above
secret
see above
timeout
see above
username
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
authtype
see above
This variable inherits its value from the parent section if
nothing is specified here.
mininterval
see above
This variable inherits its value from the parent section if
nothing is specified here.
password
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
port
see above
This variable inherits its value from the parent section if
nothing is specified here.
secret
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
username
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"TacacsPlus".)
TelnetIOSPing: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
iospass
see above
iosuser
see above
pings
see above
psource
see above
source
see above
vrf see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
iospass
see above
This variable inherits its value from the parent section if
nothing is specified here.
iosuser
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
psource
see above
This variable inherits its value from the parent section if
nothing is specified here.
source
see above
This variable inherits its value from the parent section if
nothing is specified here.
vrf see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"TelnetIOSPing".)
TelnetJunOSPing: (See the separate module documentation for details
about each variable.)
The following new variables are valid:
/^influx_.+/
see above
junospass
see above
junosuser
see above
pings
see above
psource
see above
source
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
junospass
see above
This variable inherits its value from the parent section if
nothing is specified here.
junosuser
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
psource
see above
This variable inherits its value from the parent section if
nothing is specified here.
source
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"TelnetJunOSPing".)
TraceroutePing: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
desthost
see above
host
see above
maxttl
see above
minttl
see above
pings
see above
wait
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
desthost
see above
This variable inherits its value from the parent section if
nothing is specified here.
maxttl
see above
This variable inherits its value from the parent section if
nothing is specified here.
minttl
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
wait
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"TraceroutePing".)
WebProxyFilter: (See the separate module documentation for details about
each variable.)
The following new variables are valid:
/^influx_.+/
see above
deny_re
see above
more_hosts
see above
pings
see above
timeout
see above
Syntax changes for subsection /[-_0-9a-zA-Z]+/
The following new variables are valid:
/^influx_.+/
see above
This variable inherits its value from the parent section if
nothing is specified here.
deny_re
see above
This variable inherits its value from the parent section if
nothing is specified here.
more_hosts
see above
This variable inherits its value from the parent section if
nothing is specified here.
pings
see above
This variable inherits its value from the parent section if
nothing is specified here.
timeout
see above
This variable inherits its value from the parent section if
nothing is specified here.
(End of dynamical grammar changes for variable "probe" example value
"WebProxyFilter".)
(End of dynamical grammar changes for example values of variable
"probe".)
*** Alerts ***
The Alert section lets you setup loss and RTT pattern detectors. After
each round of polling, SmokePing will examine its data and determine
which detectors match. Detectors are enabled per target and get
inherited by the targets children.
Detectors are not just simple thresholds which go off at first sight of
a problem. They are configurable to detect special loss or RTT patterns.
They let you look at a number of past readings to make a more educated
decision on what kind of alert should be sent, or if an alert should be
sent at all.
The patterns are numbers prefixed with an operator indicating the type
of comparison required for a match.
The following RTT pattern detects if a target's RTT goes from constantly
below 10ms to constantly 100ms and more:
old ------------------------------> new
<10,<10,<10,<10,<10,>10,>100,>100,>100
Loss patterns work in a similar way, except that the loss is defined as
the percentage the total number of received packets is of the total
number of packets sent.
old ------------------------------> new
==0%,==0%,==0%,==0%,>20%,>20%,>=20%
Apart from normal numbers, patterns can also contain the values * which
is true for all values regardless of the operator. And U which is true
for unknown data together with the == and =! operators.
Detectors normally act on state changes. This has the disadvantage, that
they will fail to find conditions which were already present when
launching smokeping. For this it is possible to write detectors that
begin with the special value ==S it is inserted whenever smokeping is
started up.
You can write
==S,>20%,>20%
to detect lines that have been losing more than 20% of the packets for
two periods after startup.
If you want to make sure a value within a certain range you can use two
conditions in one element
>45%<=55%
Sometimes it may be that conditions occur at irregular intervals. But
still you only want to throw an alert if they occur several times within
a certain time period. The operator *X* will ignore up to X values and
still let the pattern match:
>10%,*10*,>10%
will fire if more than 10% of the packets have been lost at least twice
over the last 10 samples.
A complete example
*** Alerts ***
to = admin@company.xy,peter@home.xy
from = smokealert@company.xy
+lossdetect
type = loss
# in percent
pattern = ==0%,==0%,==0%,==0%,>20%,>20%,>20%
comment = suddenly there is packet loss
+miniloss
type = loss
# in percent
pattern = >0%,*12*,>0%,*12*,>0%
comment = detected loss 3 times over the last two hours
+rttdetect
type = rtt
# in milliseconds
pattern = <10,<10,<10,<10,<10,<100,>100,>100,>100
comment = routing messed up again ?
+rttbadstart
type = rtt
# in milliseconds
pattern = ==S,==U
comment = offline at startup
The following variables can be set in this section:
to (mandatory setting)
Either an email address to send alerts to, or the name of a program
to execute when an alert matches. To call a program, the first
character of the to value must be a pipe symbol "|". The program
will the be called whenever an alert matches, using the following 5
arguments (except if edgetrigger is 'yes'; see below): name-of-
alert, target, loss-pattern, rtt-pattern, hostname. You can also
provide a comma separated list of addresses and programs.
from (mandatory setting)
who should alerts appear to be coming from ?
edgetrigger
The alert notifications and/or the programs executed are normally
triggered every time the alert matches. If this variable is set to
'yes', they will be triggered only when the alert's state is
changed, ie. when it's raised and when it's cleared. Subsequent
matches of the same alert will thus not trigger a notification.
When this variable is set to 'yes', a notification program (see the
to variable documentation above) will get a sixth argument, raise,
which has the value 1 if the alert was just raised and 0 if it was
cleared.
Default value: edgetrigger = no
mailtemplate
When sending out mails for alerts, smokeping normally uses an
internally generated message. With the mailtemplate you can specify
a filename for a custom template. The file should contain a
'Subject: ...' line. The rest of the file should contain text. The
all <##keyword##> type strings will get replaced in the template
before it is sent out. the following keywords are supported:
<##ALERT##> - target name
<##WHAT##> - status (is active, was raised, was cleared)
<##LINE##> - path in the config tree
<##URL##> - webpage for graph
<##STAMP##> - date and time
<##PAT##> - pattern that matched the alert
<##LOSS##> - loss history
<##RTT##> - rtt history
<##COMMENT##> - comment
The following sections are valid on level 1:
+/[^\s,]+/
The following variables can be set in this section:
type (mandatory setting)
Currently the pattern types rtt and loss and matcher are known.
Matchers are plugin modules that extend the alert conditions.
Known matchers are Avgratio, CheckLatency, CheckLoss,
ConsecutiveLoss, ExpLoss, Median, Medratio.
See the documentation of the corresponding matcher module (eg.
Smokeping::matchers::Avgratio) for instructions on configuring
it.
pattern (mandatory setting)
a comma separated list of comparison operators and numbers. rtt
patterns are in milliseconds, loss patterns are in percents
comment (mandatory setting)
to Similar to the "to" parameter on the top-level except that it
will only be used IN ADDITION to the value of the toplevel
parameter. Same rules apply.
edgetrigger
This variable inherits its value from the parent section if
nothing is specified here.
Default value: edgetrigger = no
mailtemplate
This variable inherits its value from the parent section if
nothing is specified here.
priority
if multiple alerts 'match' only the one with the highest
priority (lowest number) will cause and alert to be sent. Alerts
without priority will be sent in any case.
*** Slaves ***
Your smokeping can remote control other somkeping instances running in
slave mode on different hosts. Use this section to tell your master
smokeping about the slaves you are going to use.
The following variables can be set in this section:
secrets (mandatory setting)
The slave secrets file contains one line per slave with the name of
the slave followed by a colon and the secret:
slave1:secret1
slave2:secret2
...
Note that these secrets combined with a man-in-the-middle attack
effectively give shell access to the corresponding slaves (see
smokeping_master_slave), so the file should be appropriately
protected and the secrets should not be easily crackable.
The following sections are valid on level 1:
+/[-_0-9a-zA-Z.]+/
Define some basic properties for the slave.
The following variables can be set in this section:
display_name (mandatory setting)
Name of the Slave host.
location
Where is the slave located.
color (mandatory setting)
Color for the slave in graphs where input from multiple hosts is
presented.
The following sections are valid on level 2:
++override
If part of the configuration information must be overwritten to
match the settings of the you can specify this in this section.
A setting is overwritten by giving the full path of the
configuration variable. If you have this configuration in the
Probes section:
*** Probes ***
+FPing
binary = /usr/sepp/bin/fping
You can override it for a particular slave like this:
++override
Probes.FPing.binary = /usr/bin/fping
The following variables can be set in this section:
/\S+/
*** InfluxDB ***
If you want to export data to an InfluxDB database, fill in this
section.
The following variables can be set in this section:
host (mandatory setting)
The FQDN or IP address of your InfluxDB server. For example
'localhost', 'influx.example.org' or '127.0.0.1'
port
The port of your InfluxDB server. Default is 8086
Default value: port = 8086
timeout
Connection timeout to InfluxDB in seconds. Default is 15s. Too big
of a timeout will cause polling errors when InfluxDB is down.
Default value: timeout = 15
database (mandatory setting)
Database name (where to write the data) within InfluxDB. If it
doesn't exist, it will be created when writing data.
username
Username for authentication to InfluxDB. If not supplied, no
authentication is attempted.
password
Password for authentication to InfluxDB. If not supplied, no
authentication is attempted.
SEE ALSO
smokeping(1),smokeping_master_slave(7),smokeping_cgi(1)
Matchers:
Smokeping_matchers_Avgratio(3), Smokeping_matchers_CheckLatency(3),
Smokeping_matchers_CheckLoss(3), Smokeping_matchers_ExpLoss(3),
Smokeping_matchers_Median(3), Smokeping_matchers_Medratio(3),
Smokeping_matchers_base(3)
Probes:
Smokeping_probes_CiscoRTTMonDNS(3),
Smokeping_probes_CiscoRTTMonEchoICMP(3),
Smokeping_probes_CiscoRTTMonTcpConnect(3), Smokeping_probes_Curl(3),
Smokeping_probes_DNS(3), Smokeping_probes_DismanPing(3),
Smokeping_probes_EchoPing(3), Smokeping_probes_EchoPingChargen(3),
Smokeping_probes_EchoPingDNS(3), Smokeping_probes_EchoPingDiscard(3),
Smokeping_probes_EchoPingHttp(3), Smokeping_probes_EchoPingHttps(3),
Smokeping_probes_EchoPingIcp(3), Smokeping_probes_EchoPingLDAP(3),
Smokeping_probes_EchoPingPlugin(3), Smokeping_probes_EchoPingSmtp(3),
Smokeping_probes_EchoPingWhois(3), Smokeping_probes_FPing(3),
Smokeping_probes_FPing6(3), Smokeping_probes_FPingContinuous(3),
Smokeping_probes_FTPtransfer(3), Smokeping_probes_IOSPing(3),
Smokeping_probes_IRTT(3), Smokeping_probes_LDAP(3),
Smokeping_probes_NFSping(3), Smokeping_probes_OpenSSHEOSPing(3),
Smokeping_probes_OpenSSHJunOSPing(3), Smokeping_probes_Qstat(3),
Smokeping_probes_Radius(3), Smokeping_probes_RemoteFPing(3),
Smokeping_probes_SSH(3), Smokeping_probes_SendEmail(3),
Smokeping_probes_SipSak(3), Smokeping_probes_TCPPing(3),
Smokeping_probes_TacacsPlus(3), Smokeping_probes_TelnetIOSPing(3),
Smokeping_probes_TelnetJunOSPing(3), Smokeping_probes_TraceroutePing(3),
Smokeping_probes_WebProxyFilter(3), Smokeping_probes_base(3),
Smokeping_probes_basefork(3), Smokeping_probes_basevars(3),
Smokeping_probes_passwordchecker(3), Smokeping_probes_skel(3)
Sorters:
Smokeping_sorters_Loss(3), Smokeping_sorters_Max(3),
Smokeping_sorters_Median(3), Smokeping_sorters_StdDev(3),
Smokeping_sorters_base(3)
COPYRIGHT
Copyright (c) 2001-2007 by Tobias Oetiker. All right reserved.
LICENSE
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
675 Mass Ave, Cambridge, MA 02139, USA.
AUTHOR
Tobias Oetiker <tobi@oetiker.ch>
2.8.2 2024-02-04 SMOKEPING_CONFIG(5)
Generated by dwww version 1.16 on Tue Dec 16 07:04:41 CET 2025.