REGEXP_TABLE(5) File Formats Manual REGEXP_TABLE(5)
NAME
regexp_table - format of Postfix regular expression tables
SYNOPSIS
postmap -q "string" regexp:/etc/postfix/filename
postmap -q - regexp:/etc/postfix/filename <inputfile
DESCRIPTION
The Postfix mail system uses optional tables for address rewriting, mail
routing, or access control. These tables are usually in dbm or db for-
mat.
Alternatively, lookup tables can be specified in POSIX regular expres-
sion form. In this case, each input is compared against a list of pat-
terns. When a match is found, the corresponding result is returned and
the search is terminated.
To find out what types of lookup tables your Postfix system supports use
the "postconf -m" command.
To test lookup tables, use the "postmap -q" command as described in the
SYNOPSIS above. Use "postmap -hmq - <file" for header_checks(5) pat-
terns, and "postmap -bmq - <file" for body_checks(5) (Postfix 2.6 and
later).
COMPATIBILITY
With Postfix version 2.2 and earlier specify "postmap -fq" to query a
table that contains case sensitive patterns. Patterns are case insensi-
tive by default.
TABLE FORMAT
The general form of a Postfix regular expression table is:
/pattern/flags result
When pattern matches the input string, use the corresponding re-
sult value.
!/pattern/flags result
When pattern does not match the input string, use the correspond-
ing result value.
if /pattern/flags
endif If the input string matches /pattern/, then match that input
string against the patterns between if and endif. The if..endif
can nest.
Note: do not prepend whitespace to patterns inside if..endif.
This feature is available in Postfix 2.1 and later.
if !/pattern/flags
endif If the input string does not match /pattern/, then match that in-
put string against the patterns between if and endif. The if..en-
dif can nest.
Note: do not prepend whitespace to patterns inside if..endif.
This feature is available in Postfix 2.1 and later.
blank lines and comments
Empty lines and whitespace-only lines are ignored, as are lines
whose first non-whitespace character is a `#'.
multi-line text
A logical line starts with non-whitespace text. A line that
starts with whitespace continues a logical line.
Each pattern is a POSIX regular expression enclosed by a pair of delim-
iters. The regular expression syntax is documented in re_format(7) with
4.4BSD, in regex(5) with Solaris, and in regex(7) with Linux. Other sys-
tems may use other document names.
The expression delimiter can be any non-alphanumerical character, except
whitespace or characters that have special meaning (traditionally the
forward slash is used). The regular expression can contain whitespace.
By default, matching is case-insensitive, and newlines are not treated
as special characters. The behavior is controlled by flags, which are
toggled by appending one or more of the following characters after the
pattern:
i (default: on)
Toggles the case sensitivity flag. By default, matching is case
insensitive.
m (default: off)
Toggle the multi-line mode flag. When this flag is on, the ^ and
$ metacharacters match immediately after and immediately before a
newline character, respectively, in addition to matching at the
start and end of the input string.
x (default: on)
Toggles the extended expression syntax flag. By default, support
for extended expression syntax is enabled.
TABLE SEARCH ORDER
Patterns are applied in the order as specified in the table, until a
pattern is found that matches the input string.
Each pattern is applied to the entire input string. Depending on the
application, that string is an entire client hostname, an entire client
IP address, or an entire mail address. Thus, no parent domain or parent
network search is done, and user@domain mail addresses are not broken up
into their user and domain constituent parts, nor is user+foo broken up
into user and foo.
TEXT SUBSTITUTION
Substitution of substrings (text that matches patterns inside "()") from
the matched expression into the result string is requested with $1, $2,
etc.; specify $$ to produce a $ character as output. The macros in the
result string may need to be written as ${n} or $(n) if they aren't fol-
lowed by whitespace.
Note: since negated patterns (those preceded by !) return a result when
the expression does not match, substitutions are not available for
negated patterns.
INLINE SPECIFICATION
The contents of a table may be specified in the table name (Postfix 3.7
and later). The basic syntax is:
main.cf:
parameter = .. regexp:{ { rule-1 }, { rule-2 } .. } ..
master.cf:
.. -o { parameter = .. regexp:{ { rule-1 }, { rule-2 } .. } .. } ..
Postfix recursively expands any $parametername instances in the above
parameter value, ignores whitespace after '{' and before '}', and writes
each rule as one text line to an in-memory file:
in-memory file:
rule-1
rule-2
..
Postfix parses the result as if it is a file in /etc/postfix.
INLINE SPECIFICATION CAVEATS
• Avoid using $parametername inside an inlined regexp: pattern.
The pattern would have unexpected matches when there are
metacharacters such as '.' in the $parametername expansion. To
prevent unexpected matches, use a pcre: table, and specify \Q$pa-
rametername\E.
• When an inlined rule must contain $, specify $$ to keep Postfix
from trying to do $name expansion as it evaluates a parameter
value. To check an inline configuration, use the "postconf -x"
option as shown below:
• When a main.cf "parametername = value" setting contains
an inline regexp: table, use the command "postconf -x pa-
rametername". Verify that there are no "undefined parame-
ter" warnings, and that the output has the syntax that one
would use in a non-inlined Postfix regexp: file.
• When a master.cf "-o { parametername = value }" override
contains an inline regexp: table, use the command "post-
conf -Px '*/*/parametername' ". Verify that there are no
"undefined parameter" warnings, and that the output has
the syntax that one would use in a non-inlined Postfix
regexp: file.
EXAMPLE SMTPD ACCESS MAP
# Disallow sender-specified routing. This is a must if you relay mail
# for other domains.
/[%!@].*[%!@]/ 550 Sender-specified routing rejected
# Postmaster is OK, that way they can talk to us about how to fix
# their problem.
/^postmaster@/ OK
# Protect your outgoing majordomo exploders
if !/^owner-/
/^(.*)-outgoing@(.*)$/ 550 Use ${1}@${2} instead
endif
EXAMPLE HEADER FILTER MAP
# These were once common in junk mail.
/^Subject: make money fast/ REJECT
/^To: friend@public\.com/ REJECT
EXAMPLE BODY FILTER MAP
# First skip over base 64 encoded text to save CPU cycles.
~^[[:alnum:]+/]{60,}$~ OK
# Put your own body patterns here.
SEE ALSO
postmap(1), Postfix lookup table manager
pcre_table(5), format of PCRE tables
cidr_table(5), format of CIDR tables
README FILES
Use "postconf readme_directory" or "postconf html_directory" to locate
this information.
DATABASE_README, Postfix lookup table overview
AUTHOR(S)
The regexp table lookup code was originally written by:
LaMont Jones
lamont@hp.com
That code was based on the PCRE dictionary contributed by:
Andrew McNamara
andrewm@connect.com.au
connect.com.au Pty. Ltd.
Level 3, 213 Miller St
North Sydney, NSW, Australia
Adopted and adapted by:
Wietse Venema
IBM T.J. Watson Research
P.O. Box 704
Yorktown Heights, NY 10598, USA
Wietse Venema
Google, Inc.
111 8th Avenue
New York, NY 10011, USA
REGEXP_TABLE(5)
Generated by dwww version 1.16 on Tue Dec 16 04:30:35 CET 2025.