Pamtogif User Manual(1) General Commands Manual Pamtogif User Manual(1)
NAME
pamtogif - convert a Netpbm image to a GIF image
SYNOPSIS
pamtogif
[-interlace]
[-sort]
[-mapfile=mapfile] [-transparent=[=]color]
[-alphacolor=color]
[-comment=text]
[-noclear]
[-nolzw]
[-aspect=fraction]
[-verbose] [netpbmfile]
All options can be abbreviated to their shortest unique prefix. You may
use two hyphens instead of one to designate an option. You may use ei-
ther white space or an equals sign between an option name and its value.
DESCRIPTION
This program is part of Netpbm(1).
pamtogif reads a Netpbm image as input and produces a GIF file as out-
put.
This program creates only individual GIF images. To combine multiple
GIF images into an animated GIF, use ]8;;http://www.lcdf.org/gifsicle/\gifsicle]8;;\ (not part of the Netpbm
package).
pamtogif creates either an original GIF87 format GIF file or the
newer GIF89 format. It creates GIF89 when the output needs to have
features
that were new with GIF89, to wit transparency or comments. Otherwise,
it
creates GIF87. Really old GIF readers conceivably could not recognize
GIF89. The output needs to have transparency when either the input
has a
transparency information or you specify the -transparent option. It
needs to have comments when you specify the
-comment option.
pamtogif generates a GIF image with a single image block, which means
the image cannot have more than 256 colors in it (it contains a single
color map with a maximum size of 256). If the image you want to convert
has more colors than that (ppmhist can tell you), you can use pnmquant
to reduce it to 256. Or use the more complex but faster method de-
scribed under the -mapfile option.
If your input image is a PAM with transparency information, pamtogif
uses one entry in the GIF colormap specifically for the transparent pix-
els, so you can have at most 255 opaque colors. In contrast, if you use
the -transparent option, one of the colors from the input becomes trans-
parent, so the limit is still 256.
pamtogif recognizes transparency information in the input by the
tuple type being RGB_ALPHA, GRAYSCALE_ALPHA, or
BLACKANDWHITE_ALPHA. This is the case for any image that has
transparency information and was created by a Netpbm program that
manipulates visual images. If, on the other hand, you have a PAM gen-
erated
some other way, but you know the planes have the same meaning as im-
plied by
these tuple types, you can make pamtogif process the transparency
information by changing the tuple type accordingly before you pass it
to pamtogif. You can use pamstack to change the tuple type.
pamtogif was new in Netpbm 10.37 (December 2006). In older Netpbm, use
ppmtogif.
OPTIONS
In addition to the options common to all programs based on libnetpbm
(most notably -quiet, see ]8;;index.html#commonoptions\ Common Options]8;;\ ), pamtogif recognizes the
following command line options:
-interlace
Produce an interlaced GIF file.
-sort Produce a GIF file with a color map sorted in a predictable or-
der.
This does not produce the sorted color map which is part of the
GIF format. That kind of sorted color map is one where the col-
ors are sorted according to how important they are, and the GIF
header tells the viewer that it is sorted that way. Its purpose
is to allow the viewer to use fewer colors than are in the color
map if it is not capable of displaying all the colors.
What this option produces is a color map sorted by red value,
then green, then blue. That can be useful in analyzing GIF im-
ages, particularly those made with two versions of the program,
because it removes some of the variability.
-mapfile=mapfile
Use the colors found in the file mapfile to create the colormap
in the GIF file, instead of the colors from netpbmfile. mapfile
can be any PPM file; all that matters is the colors in it. If
the colors in netpbmfile do not match those in mapfile, pamtogif
matches them to a "best match." You can obtain a much better re-
sult by using pnmremap to change the colors in the input to those
in the map file.
The mapfile file is not a palette file, just an image whose col-
ors you want to use. The order of colors in the GIF palette have
nothing to do with where they appear in the mapfile image, and
duplication of colors in the image is irrelevant.
The map file's depth must match the number of color components in
the input (which is not necessarily the same as the input's depth
-- the input might have a transparency plane in addition). If
your map file does not, or it might not, run your input through
pnmremap using the same map file so that it does.
You can use -mapfile to speed up conversion of an image where you
already have a map file because of earlier processing of your im-
age. For example, it is common to start with an image that has
more than 256 colors and remap its colors to a set of 256 colors
so that pamgtogif can convert it (a GIF can have only 256 colors;
pamtogif without -mapfile fails on any image that has more than
that) with pnmquant. When you do this, pnmquant generates a
palette to do the color quantization, then pamtogif generates an
identical palette from the quantized image. You can save compu-
tation by generating the palette once:
$ pnmcolormap 256 myimage.ppm >/tmp/colormap.ppm
$ pamtogif myimage.ppm -mapfile=/tmp/colormap.ppm >output.gif
-transparent=color
pamtogif marks the specified color as transparent in the GIF im-
age.
If you don't specify -transparent, pamtogif does not mark any
color transparent (except as indicated by the transparency infor-
mation in the input file).
Specify the color (color) as described for the ]8;;libnetpbm_image.html#colorname\argument of the
pnm_parsecolor() library routine]8;;\ .
If the color you specify is not present in the image, pamtogif
selects instead the color in the image that is closest to the one
you specify. Closeness is measured as a Cartesian distance be-
tween colors in RGB space. If multiple colors are equidistant,
pamtogif chooses one of them arbitrarily.
However, if you prefix your color specification with "=", e.g.
-transparent==red, only the exact color you specify will be
transparent. If that color does not appear in the image, there
will be no transparency. pamtogif issues an information message
when this is the case.
When you specify -transparent, pamtogif ignores explicit trans-
parency information (the "alpha channel") in the input image.
-alphacolor=color
This specifies the foreground color for transparent pixels. A
viewer may use the foreground color for a transparent pixel if it
chooses not to have another color "show through.". The default
is black.
This applies only to pixels that are transparent in the GIF be-
cause they are transparent in the Netpbm input. If a GIF pixel
is transparent because of the -transparent option, the foreground
color is the color indicated by that option.
Note that in GIF, all transparent pixels have the same foreground
color. (There is only one entry in the GIF colormap for trans-
parent pixels).
Specify the color (color) as described for the ]8;;libnetpbm_image.html#colorname\argument of the
pnm_parsecolor() library routine]8;;\ .
-comment=text
Include a comment in the GIF output with comment text text.
Without this option, there are no comments in the output.
Note that in a command shell, you'll have to use quotation marks
around text if it contains characters (e.g. space) that would
make the shell think it is multiple arguments:
$ pamtogif -comment "this is a comment" <xxx.ppm >xxx.gif
-noclear
This option causes the output not to contain any GIF clear codes.
In GIF, the stream defines codes that represent strings of pixels
as it goes. The stream contains definitions of codes mixed in
with the references to those codes that describe the pixels of
the image. GIF specifies a maximum number of codes that can be
defined; when the stream has defined that many, the stream can
either just use those for the rest of the image or include a
clear code, deleting all the string codes so that the stream can
start over defining new ones.
By far the most common choice is the clear code. This usually
results in a smaller stream because the set of strings of pixels
that occur in an image vary over the parts of the image. Hardly
any GIF encoders produce streams that don't use the clear code.
But it is conceivable that a stream could be smaller without the
use of the clear code because it saves the stream having to rede-
fine the same string codes over and over. It could even avoid a
thrashing situation where the stream continually defines a set of
strings that never get used again before the maximum is reached.
The default is to use the clear codes.
This option was new in Netpbm 10.82 (March 2018). Before that,
the program aways uses the clear codes.
-nolzw
This option is mainly of historical interest -- it involves use
of a patent that is now expired.
This option causes the GIF output, and thus pamtogif, not to use
LZW (Lempel-Ziv) compression. As a result, the image file is
larger and, before the patent expired, no royalties would be owed
to the holder of the patent on LZW. See the section LICENSE be-
low.
LZW is a method for combining the information from multiple pix-
els into a single GIF code. With the -nolzw option, pamtogif
creates one GIF code per pixel, so it is not doing any compres-
sion and not using LZW. However, any GIF decoder, whether it
uses an LZW decompressor or not, will correctly decode this un-
compressed format. An LZW decompressor would see this as a par-
ticular case of LZW compression.
Note that if someone uses an LZW decompressor such as the one in
giftopnm or pretty much any graphics display program to process
the output of pamtogif -nolzw , he is then using the LZW patent.
But the patent holder expressed far less interest in enforcing
the patent on decoding than on encoding.
-aspect=fraction
This is the aspect ratio of the pixels of the image. Its only
effect is to record that information in the GIF for use by what-
ever interprets the GIF. Note that this feature of GIF is hardly
ever used and most GIF decoders ignore this information and as-
sume pixels are square.
Pixels in a Netpbm image do not have aspect ratios; there is al-
ways a one-one correspondence between GIF pixels and Netpbm pix-
els.
The aspect ratio is the quotient of width divided by height. GIF
allows aspect ratios from 0.25 (1:4) to 4 (4:1) in increments of
1/64. pamtogif implements a natural extension of GIF that allows
an aspect ratio up to 4 14/64. If you specify anything outside
this range, pamtogif fails. pamtogif rounds fraction to the
nearest 1/64.
The default is square (1.0).
This option was new in Netpbm 10.38 (March 2007). Before that,
the pixels are always square.
-verbose
This option causes pamtogif to display information about the con-
version process and the image it produces.
SEE ALSO
giftopnm(1), pnmremap(1), ppmtogif(1),
gifsicle ]8;;http://www.lcdf.org/gifsicle\http://www.lcdf.org/gifsicle]8;;\ , pnm(1), pam(1).
HISTORY
pamtogif was new in Netpbm 10.37 (December 2006). It replaced ppmtogif,
which created GIF images for Pbmplus/Netpbm users since 1989.
The main outward change in the conversion from ppmtogif to pamtogif was
that pamtogif was able to use transparency information ("alpha channel")
in PAM input, whereas with ppmtogif, one had to supply the transparency
mask in a separate pseudo-PGM image (via the -alpha option).
Jef Poskanzer wrote ppmtogif in 1989, and it has always been a corner-
stone of Pbmplus/Netpbm because GIF is such a popular image format. Jef
based the LZW encoding on GIFENCOD by David Rowley <mgardi@watdcsu.wa-
terloo.edu>. Jef included GIFENCOD's GIFCOMPR.C file pretty much whole.
Rowley, in turn, adapted the LZW compression code from classic Unix com-
press, which used techniques described in IEEE Computer, June 1984.
Jef's ppmtogif notably lacked the ability to use a transparency mask
with it. You could create transparent pixels in a GIF, but only with
the -transparent option, which allowed one to specify that all pixels of
a certain color in the input were to be transparent. Bryan Henderson
added the -alpha option in July 2001 so you could supply a mask image
that indicates exactly which pixels are to be transparent, and those
pixels could have the same color as other opaque ones.
Bryan Henderson added another significant piece of code and function in
October 2001: the ability to generate a GIF without using the LZW patent
-- an uncompressed GIF. This was very important to many people at the
time because the GIF patent was still in force, and this allowed them to
make an image that any GIF viewer could display, royalty-free. Bryan
adapted code from the Independent JPEG Group's djpeg for that.
There is no code in pamtogif from Jef's original, but Jef may still hold
copyright over it because of the way in which it evolved. Virtually all
of the code in pamtogif was written by Bryan Henderson and contributed
to the public domain.
LICENSE
If you use pamtogif without the -nolzw option, you are using a patent on
the LZW compression method which is owned by Unisys. The patent has ex-
pired (in 2003 in the US and in 2004 elsewhere), so it doesn't matter.
While the patent was in force, most people who used pamtogif and similar
programs did so without a license from Unisys to do so. Unisys typi-
cally asked $5000 for a license for trivial use of the patent. Unisys
never enforced the patent against trivial users.
Rumor has it that IBM also owns or owned a patent covering pamtogif.
A replacement for the GIF format that never required any patents to use
is the PNG format.
DOCUMENT SOURCE
This manual page was generated by the Netpbm tool 'makeman' from HTML
source. The master documentation is at
http://netpbm.sourceforge.net/doc/pamtogif.html
netpbm documentation 09 June 2021 Pamtogif User Manual(1)
Generated by dwww version 1.16 on Tue Dec 16 04:50:52 CET 2025.