access(2) System Calls Manual access(2)
NAME
access, faccessat, faccessat2 - check user's permissions for a file
LIBRARY
Standard C library (libc, -lc)
SYNOPSIS
#include <unistd.h>
int access(const char *pathname, int mode);
#include <fcntl.h> /* Definition of AT_* constants */
#include <unistd.h>
int faccessat(int dirfd, const char *pathname, int mode, int flags);
/* But see C library/kernel differences, below */
#include <fcntl.h> /* Definition of AT_* constants */
#include <sys/syscall.h> /* Definition of SYS_* constants */
#include <unistd.h>
int syscall(SYS_faccessat2,
int dirfd, const char *pathname, int mode, int flags);
Feature Test Macro Requirements for glibc (see feature_test_macros(7)):
faccessat():
Since glibc 2.10:
_POSIX_C_SOURCE >= 200809L
Before glibc 2.10:
_ATFILE_SOURCE
DESCRIPTION
access() checks whether the calling process can access the file path-
name. If pathname is a symbolic link, it is dereferenced.
The mode specifies the accessibility check(s) to be performed, and is
either the value F_OK, or a mask consisting of the bitwise OR of one or
more of R_OK, W_OK, and X_OK. F_OK tests for the existence of the file.
R_OK, W_OK, and X_OK test whether the file exists and grants read,
write, and execute permissions, respectively.
The check is done using the calling process's real UID and GID, rather
than the effective IDs as is done when actually attempting an operation
(e.g., open(2)) on the file. Similarly, for the root user, the check
uses the set of permitted capabilities rather than the set of effective
capabilities; and for non-root users, the check uses an empty set of ca-
pabilities.
This allows set-user-ID programs and capability-endowed programs to eas-
ily determine the invoking user's authority. In other words, access()
does not answer the "can I read/write/execute this file?" question. It
answers a slightly different question: "(assuming I'm a setuid binary)
can the user who invoked me read/write/execute this file?", which gives
set-user-ID programs the possibility to prevent malicious users from
causing them to read files which users shouldn't be able to read.
If the calling process is privileged (i.e., its real UID is zero), then
an X_OK check is successful for a regular file if execute permission is
enabled for any of the file owner, group, or other.
faccessat()
faccessat() operates in exactly the same way as access(), except for the
differences described here.
If the pathname given in pathname is relative, then it is interpreted
relative to the directory referred to by the file descriptor dirfd
(rather than relative to the current working directory of the calling
process, as is done by access() for a relative pathname).
If pathname is relative and dirfd is the special value AT_FDCWD, then
pathname is interpreted relative to the current working directory of the
calling process (like access()).
If pathname is absolute, then dirfd is ignored.
flags is constructed by ORing together zero or more of the following
values:
AT_EACCESS
Perform access checks using the effective user and group IDs. By
default, faccessat() uses the real IDs (like access()).
AT_EMPTY_PATH (since Linux 5.8)
If pathname is an empty string, operate on the file referred to
by dirfd (which may have been obtained using the open(2) O_PATH
flag). In this case, dirfd can refer to any type of file, not
just a directory. If dirfd is AT_FDCWD, the call operates on the
current working directory. This flag is Linux-specific; define
_GNU_SOURCE to obtain its definition.
AT_SYMLINK_NOFOLLOW
If pathname is a symbolic link, do not dereference it: instead
return information about the link itself.
See openat(2) for an explanation of the need for faccessat().
faccessat2()
The description of faccessat() given above corresponds to POSIX.1 and to
the implementation provided by glibc. However, the glibc implementation
was an imperfect emulation (see BUGS) that papered over the fact that
the raw Linux faccessat() system call does not have a flags argument.
To allow for a proper implementation, Linux 5.8 added the faccessat2()
system call, which supports the flags argument and allows a correct im-
plementation of the faccessat() wrapper function.
RETURN VALUE
On success (all requested permissions granted, or mode is F_OK and the
file exists), zero is returned. On error (at least one bit in mode
asked for a permission that is denied, or mode is F_OK and the file does
not exist, or some other error occurred), -1 is returned, and errno is
set to indicate the error.
ERRORS
EACCES The requested access would be denied to the file, or search per-
mission is denied for one of the directories in the path prefix
of pathname. (See also path_resolution(7).)
EBADF (faccessat()) pathname is relative but dirfd is neither AT_FDCWD
(faccessat()) nor a valid file descriptor.
EFAULT pathname points outside your accessible address space.
EINVAL mode was incorrectly specified.
EINVAL (faccessat()) Invalid flag specified in flags.
EIO An I/O error occurred.
ELOOP Too many symbolic links were encountered in resolving pathname.
ENAMETOOLONG
pathname is too long.
ENOENT A component of pathname does not exist or is a dangling symbolic
link.
ENOMEM Insufficient kernel memory was available.
ENOTDIR
A component used as a directory in pathname is not, in fact, a
directory.
ENOTDIR
(faccessat()) pathname is relative and dirfd is a file descriptor
referring to a file other than a directory.
EPERM Write permission was requested to a file that has the immutable
flag set. See also FS_IOC_SETFLAGS(2const).
EROFS Write permission was requested for a file on a read-only filesys-
tem.
ETXTBSY
Write access was requested to an executable which is being exe-
cuted.
VERSIONS
If the calling process has appropriate privileges (i.e., is superuser),
POSIX.1-2001 permits an implementation to indicate success for an X_OK
check even if none of the execute file permission bits are set. Linux
does not do this.
C library/kernel differences
The raw faccessat() system call takes only the first three arguments.
The AT_EACCESS and AT_SYMLINK_NOFOLLOW flags are actually implemented
within the glibc wrapper function for faccessat(). If either of these
flags is specified, then the wrapper function employs fstatat(2) to de-
termine access permissions, but see BUGS.
glibc notes
On older kernels where faccessat() is unavailable (and when the AT_EAC-
CESS and AT_SYMLINK_NOFOLLOW flags are not specified), the glibc wrapper
function falls back to the use of access(). When pathname is a relative
pathname, glibc constructs a pathname based on the symbolic link in
/proc/self/fd that corresponds to the dirfd argument.
STANDARDS
access()
faccessat()
POSIX.1-2008.
faccessat2()
Linux.
HISTORY
access()
SVr4, 4.3BSD, POSIX.1-2001.
faccessat()
Linux 2.6.16, glibc 2.4.
faccessat2()
Linux 5.8.
NOTES
Warning: Using these calls to check if a user is authorized to, for ex-
ample, open a file before actually doing so using open(2) creates a se-
curity hole, because the user might exploit the short time interval be-
tween checking and opening the file to manipulate it. For this reason,
the use of this system call should be avoided. (In the example just de-
scribed, a safer alternative would be to temporarily switch the
process's effective user ID to the real ID and then call open(2).)
access() always dereferences symbolic links. If you need to check the
permissions on a symbolic link, use faccessat() with the flag AT_SYM-
LINK_NOFOLLOW.
These calls return an error if any of the access types in mode is de-
nied, even if some of the other access types in mode are permitted.
A file is accessible only if the permissions on each of the directories
in the path prefix of pathname grant search (i.e., execute) access. If
any directory is inaccessible, then the access() call fails, regardless
of the permissions on the file itself.
Only access bits are checked, not the file type or contents. Therefore,
if a directory is found to be writable, it probably means that files can
be created in the directory, and not that the directory can be written
as a file. Similarly, a DOS file may be reported as executable, but the
execve(2) call will still fail.
These calls may not work correctly on NFSv2 filesystems with UID mapping
enabled, because UID mapping is done on the server and hidden from the
client, which checks permissions. (NFS versions 3 and higher perform
the check on the server.) Similar problems can occur to FUSE mounts.
BUGS
Because the Linux kernel's faccessat() system call does not support a
flags argument, the glibc faccessat() wrapper function provided in glibc
2.32 and earlier emulates the required functionality using a combination
of the faccessat() system call and fstatat(2). However, this emulation
does not take ACLs into account. Starting with glibc 2.33, the wrapper
function avoids this bug by making use of the faccessat2() system call
where it is provided by the underlying kernel.
In Linux 2.4 (and earlier) there is some strangeness in the handling of
X_OK tests for superuser. If all categories of execute permission are
disabled for a nondirectory file, then the only access() test that re-
turns -1 is when mode is specified as just X_OK; if R_OK or W_OK is also
specified in mode, then access() returns 0 for such files. Early Linux
2.6 (up to and including Linux 2.6.3) also behaved in the same way as
Linux 2.4.
Before Linux 2.6.20, these calls ignored the effect of the MS_NOEXEC
flag if it was used to mount(2) the underlying filesystem. Since Linux
2.6.20, the MS_NOEXEC flag is honored.
SEE ALSO
chmod(2), chown(2), open(2), setgid(2), setuid(2), stat(2), euidac-
cess(3), credentials(7), path_resolution(7), symlink(7)
Linux man-pages 6.9.1 2024-06-13 access(2)
Generated by dwww version 1.16 on Tue Dec 16 04:02:06 CET 2025.