e2fsck.conf(5) File Formats Manual e2fsck.conf(5)
NAME
e2fsck.conf - Configuration file for e2fsck
DESCRIPTION
e2fsck.conf is the configuration file for e2fsck(8). It controls the
default behavior of e2fsck(8) while it is checking ext2, ext3, or ext4
file systems.
The e2fsck.conf file uses an INI-style format. Stanzas, or top-level
sections, are delimited by square braces: [ ]. Within each section,
each line defines a relation, which assigns tags to values, or to a sub-
section, which contains further relations or subsections. An example of
the INI-style format used by this configuration file follows below:
[section1]
tag1 = value_a
tag1 = value_b
tag2 = value_c
[section 2]
tag3 = {
subtag1 = subtag_value_a
subtag1 = subtag_value_b
subtag2 = subtag_value_c
}
tag1 = value_d
tag2 = value_e
}
Comments are delimited by a semicolon (';') or a hash ('#') character at
the beginning of the comment, and are terminated by the end of line
character.
Tags and values must be quoted using double quotes if they contain
spaces. Within a quoted string, the standard backslash interpretations
apply: "\n" (for the newline character), "\t" (for the tab character),
"\b" (for the backspace character), and "\\" (for the backslash charac-
ter).
The following stanzas are used in the e2fsck.conf file. They will be
described in more detail in future sections of this document.
[options]
This stanza contains general configuration parameters for
e2fsck's behavior.
[defaults]
Contains relations which define the default parameters used by
e2fsck(8). In general, these defaults may be overridden by com-
mand-line options provided by the user.
[problems]
This stanza allows the administrator to reconfigure how e2fsck
handles various file system inconsistencies.
[scratch_files]
This stanza controls when e2fsck will attempt to use scratch
files to reduce the need for memory.
THE [options] STANZA
The following relations are defined in the [options] stanza.
allow_cancellation
If this relation is set to a boolean value of true, then if the
user interrupts e2fsck using ^C, and the file system is not ex-
plicitly flagged as containing errors, e2fsck will exit with an
exit status of 0 instead of 32. This setting defaults to false.
accept_time_fudge
Unfortunately, due to Windows' unfortunate design decision to
configure the hardware clock to tick localtime, instead of the
more proper and less error-prone UTC time, many users end up in
the situation where the system clock is incorrectly set at the
time when e2fsck is run.
Historically this was usually due to some distributions having
buggy init scripts and/or installers that didn't correctly detect
this case and take appropriate countermeasures. Unfortunately,
this is occasionally true even today, usually due to a buggy or
misconfigured virtualization manager or the installer not having
access to a network time server during the installation process.
So by default, we allow the superblock times to be fudged by up
to 24 hours. This can be disabled by setting accept_time_fudge
to the boolean value of false. This setting defaults to true.
broken_system_clock
The e2fsck(8) program has some heuristics that assume that the
system clock is correct. In addition, many system programs make
similar assumptions. For example, the UUID library depends on
time not going backwards in order for it to be able to make its
guarantees about issuing universally unique ID's. Systems with
broken system clocks, are well, broken. However, broken system
clocks, particularly in embedded systems, do exist. E2fsck will
attempt to use heuristics to determine if the time can not be
trusted; and to skip time-based checks if this is true. If this
boolean is set to true, then e2fsck will always assume that the
system clock can not be trusted.
buggy_init_scripts
This boolean relation is an alias for accept_time_fudge for back-
wards compatibility; it used to be that the behavior defined by
accept_time_fudge above defaulted to false, and
buggy_init_scripts would enable superblock time field to be wrong
by up to 24 hours. When we changed the default, we also renamed
this boolean relation to accept_time_fudge.
clear_test_fs_flag
This boolean relation controls whether or not e2fsck(8) will of-
fer to clear the test_fs flag if the ext4 file system is avail-
able on the system. It defaults to true.
defer_check_on_battery
This boolean relation controls whether or not the interval be-
tween file system checks (either based on time or number of
mounts) should be doubled if the system is running on battery.
This setting defaults to true.
indexed_dir_slack_percentage
When e2fsck(8) repacks a indexed directory, reserve the specified
percentage of empty space in each leaf nodes so that a few new
entries can be added to the directory without splitting leaf
nodes, so that the average fill ratio of directories can be main-
tained at a higher, more efficient level. This relation defaults
to 20 percent.
inode_count_fullmap
If this boolean relation is true, trade off using memory for
speed when checking a file system with a large number of hard-
linked files. The amount of memory required is proportional to
the number of inodes in the file system. For large file systems,
this can be gigabytes of memory. (For example a 40TB file system
with 2.8 billion inodes will consume an additional 5.7 GB memory
if this optimization is enabled.) This setting defaults to
false.
log_dir
If the log_filename or problem_log_filename relations contains a
relative pathname, then the log file will be placed in the direc-
tory named by the log_dir relation.
log_dir_fallback
This relation contains an alternate directory that will be used
if the directory specified by log_dir is not available or is not
writable.
log_dir_wait
If this boolean relation is true, them if the directories speci-
fied by log_dir or log_dir_fallback are not available or are not
yet writable, e2fsck will save the output in a memory buffer, and
a child process will periodically test to see if the log direc-
tory has become available after the boot sequence has mounted the
requested file system for reading/writing. This implements the
functionality provided by logsave(8) for e2fsck log files.
log_filename
This relation specifies the file name where a copy of e2fsck's
output will be written. If certain problem reports are sup-
pressed using the max_count_problems relation, (or on a per-prob-
lem basis using the max_count relation), the full set of problem
reports will be written to the log file. The filename may con-
tain various percent-expressions (%D, %T, %N, etc.) which will be
expanded so that the file name for the log file can include
things like date, time, device name, and other run-time parame-
ters. See the LOGGING section for more details.
max_count_problems
This relation specifies the maximum number of problem reports of
a particular type will be printed to stdout before further prob-
lem reports of that type are squelched. This can be useful if
the console is slow (i.e., connected to a serial port) and so a
large amount of output could end up delaying the boot process for
a long time (potentially hours).
no_optimize_extents
If this boolean relation is true, do not offer to optimize the
extent tree by reducing the tree's width or depth. This setting
defaults to false.
problem_log_filename
This relation specifies the file name where a log of problem
codes found by e2fsck be written. The filename may contain vari-
ous percent-expressions (%D, %T, %N, etc.) which will be expanded
so that the file name for the log file can include things like
date, time, device name, and other run-time parameters. See the
LOGGING section for more details.
readahead_mem_pct
Use this percentage of memory to try to read in metadata blocks
ahead of the main e2fsck thread. This should reduce run times,
depending on the speed of the underlying storage and the amount
of free memory. There is no default, but see readahead_kb for
more details.
readahead_kb
Use this amount of memory to read in metadata blocks ahead of the
main checking thread. Setting this value to zero disables reada-
head entirely. By default, this is set the size of two block
groups' inode tables (typically 4MiB on a regular ext4 file sys-
tem); if this amount is more than 1/50th of total physical mem-
ory, readahead is disabled.
report_features
If this boolean relation is true, e2fsck will print the file sys-
tem features as part of its verbose reporting (i.e., if the -v
option is specified)
report_time
If this boolean relation is true, e2fsck will run as if the op-
tions -tt are always specified. This will cause e2fsck to print
timing statistics on a pass by pass basis for full file system
checks.
report_verbose
If this boolean relation is true, e2fsck will run as if the op-
tion -v is always specified. This will cause e2fsck to print
some additional information at the end of each full file system
check.
THE [defaults] STANZA
The following relations are defined in the [defaults] stanza.
undo_dir
This relation specifies the directory where the undo file should
be stored. It can be overridden via the E2FSPROGS_UNDO_DIR envi-
ronment variable. If the directory location is set to the value
none, e2fsck will not create an undo file.
THE [problems] STANZA
Each tag in the [problems] stanza names a problem code specified with a
leading "0x" followed by six hex digits. The value of the tag is a sub-
section where the relations in that subsection override the default
treatment of that particular problem code.
Note that inappropriate settings in this stanza may cause e2fsck to be-
have incorrectly, or even crash. Most system administrators should not
be making changes to this section without referring to source code.
Within each problem code's subsection, the following tags may be used:
description
This relation allows the message which is printed when this file
system inconsistency is detected to be overridden.
preen_ok
This boolean relation overrides the default behavior controlling
whether this file system problem should be automatically fixed
when e2fsck is running in preen mode.
max_count
This integer relation overrides the max_count_problems parameter
(set in the options section) for this particular problem.
no_ok This boolean relation overrides the default behavior determining
whether or not the file system will be marked as inconsistent if
the user declines to fix the reported problem.
no_default
This boolean relation overrides whether the default answer for
this problem (or question) should be "no".
preen_nomessage
This boolean relation overrides the default behavior controlling
whether or not the description for this file system problem
should be suppressed when e2fsck is running in preen mode.
no_nomsg
This boolean relation overrides the default behavior controlling
whether or not the description for this file system problem
should be suppressed when a problem forced not to be fixed, ei-
ther because e2fsck is run with the -n option or because the
force_no flag has been set for the problem.
force_no
This boolean option, if set to true, forces a problem to never be
fixed. That is, it will be as if the user problem responds 'no'
to the question of 'should this problem be fixed?'. The force_no
option even overrides the -y option given on the command-line
(just for the specific problem, of course).
not_a_fix
This boolean option, it set to true, marks the problem as one
where if the user gives permission to make the requested change,
it does not mean that the file system had a problem which has
since been fixed. This is used for requests to optimize the file
system's data structure, such as pruning an extent tree.
THE [scratch_files] STANZA
The following relations are defined in the [scratch_files] stanza.
directory
If the directory named by this relation exists and is writeable,
then e2fsck will attempt to use this directory to store scratch
files instead of using in-memory data structures.
numdirs_threshold
If this relation is set, then in-memory data structures will be
used if the number of directories in the file system are fewer
than amount specified.
dirinfo
This relation controls whether or not the scratch file directory
is used instead of an in-memory data structure for directory in-
formation. It defaults to true.
icount This relation controls whether or not the scratch file directory
is used instead of an in-memory data structure when tracking in-
ode counts. It defaults to true.
LOGGING
E2fsck has the facility to save the information from an e2fsck run in a
directory so that a system administrator can review its output at their
leisure. This allows information captured during the automatic e2fsck
preen run, as well as a manually started e2fsck run, to be saved for
posterity. This facility is controlled by the log_filename, log_dir,
log_dir_fallback, and log_dir_wait relations in the [options] stanza.
The filename in log_filename may contain the following percent-expres-
sions that will be expanded as follows.
%d The current day of the month
%D The current date; this is a equivalent of %Y%m%d
%h The hostname of the system.
%H The current hour in 24-hour format (00..23)
%m The current month as a two-digit number (01..12)
%M The current minute (00..59)
%N The name of the block device containing the file system, with any
directory pathname stripped off.
%p The pid of the e2fsck process
%s The current time expressed as the number of seconds since
1970-01-01 00:00:00 UTC
%S The current second (00..59)
%T The current time; this is equivalent of %H%M%S
%u The name of the user running e2fsck.
%U This percent expression does not expand to anything, but it sig-
nals that any following date or time expressions should be ex-
pressed in UTC time instead of the local timezone.
%y The last two digits of the current year (00..99)
%Y The current year (i.e., 2012).
EXAMPLES
The following recipe will prevent e2fsck from aborting during the boot
process when a file system contains orphaned files. (Of course, this is
not always a good idea, since critical files that are needed for the se-
curity of the system could potentially end up in lost+found, and start-
ing the system without first having a system administrator check things
out may be dangerous.)
[problems]
0x040002 = {
preen_ok = true
description = "@u @i %i. "
}
The following recipe will cause an e2fsck logfile to be written to the
directory /var/log/e2fsck, with a filename that contains the device
name, the hostname of the system, the date, and time: e.g., "e2fsck-
sda3.server.INFO.20120314-112142". If the directory containing /var/log
is located on the root file system which is initially mounted read-only,
then the output will be saved in memory and written out once the root
file system has been remounted read/write. To avoid too much detail
from being written to the serial console (which could potentially slow
down the boot sequence), only print no more than 16 instances of each
type of file system corruption.
[options]
max_count_problems = 16
log_dir = /var/log/e2fsck
log_filename = e2fsck-%N.%h.INFO.%D-%T
log_dir_wait = true
FILES
/etc/e2fsck.conf
The configuration file for e2fsck(8).
SEE ALSO
e2fsck(8)
E2fsprogs version 1.47.2 January 2025 e2fsck.conf(5)
Generated by dwww version 1.16 on Tue Dec 16 04:55:40 CET 2025.