deb-control(5) dpkg suite deb-control(5)
NAME
deb-control - Debian binary package control file format
SYNOPSIS
DEBIAN/control
DESCRIPTION
Each Debian binary package contains a control file in its control
member, and its deb822(5) format is a subset of the debian/control
template source control file in Debian source packages, see
deb-src-control(5).
This file contains a number of fields. Each field begins with a tag,
such as Package or Version (case insensitive), followed by a colon, and
the body of the field (case sensitive unless stated otherwise). Fields
are delimited only by field tags. In other words, field text may be
multiple lines in length, but the installation tools will generally join
lines when processing the body of the field (except in the case of the
Description field, see below).
FIELDS
Package: package-name (required)
The value of this field determines the package name, and is used to
generate file names by most installation tools.
Package-Type: deb|udeb|type
This field defines the type of the package. udeb is for size-
constrained packages used by the debian installer. deb is the
default value, it is assumed if the field is absent. More types
might be added in the future.
Version: version-string (required)
Typically, this is the original package's version number in whatever
form the program's author uses. It may also include a Debian
revision number (for non-native packages). The exact format and
sorting algorithm are described in deb-version(7).
Maintainer: fullname-email (recommended)
Should be in the format “Joe Bloggs <jbloggs@foo.com>”, and is
typically the person who created the package, as opposed to the
author of the software that was packaged.
Description: short-description (recommended)
long-description
The format for the package description is a short brief summary on
the first line (after the Description field). The following lines
should be used as a longer, more detailed description. Each line of
the long description must be preceded by a space, and blank lines in
the long description must contain a single ‘.’ following the
preceding space.
Section: section
This is a general field that gives the package a category based on
the software that it installs. Some common sections are utils, net,
mail, text, x11, etc.
The accepted values are based on the specific distribution policy.
Priority: priority
Sets the importance of this package in relation to the system as a
whole. The known priorities are required, important, standard,
optional, extra, and unknown, but other values can be used as well.
How to apply these values depends on the specific distribution
policy.
Installed-Size: size
The approximate total size of the package's installed files, in KiB
units. The algorithm to compute the size is described in
deb-substvars(5).
Protected: yes|no
This field is usually only needed when the answer is yes. It
denotes a package that is required mostly for proper booting of the
system or used for custom system-local meta-packages. dpkg(1) or
any other installation tool will not allow a Protected package to be
removed (at least not without using one of the force options).
Supported since dpkg 1.20.1.
Essential: yes|no
This field is usually only needed when the answer is yes. It
denotes a package that is required for the packaging system, for
proper operation of the system in general or during boot (although
the latter should be converted to Protected field instead). dpkg(1)
or any other installation tool will not allow an Essential package
to be removed (at least not without using one of the force options).
Build-Essential: yes|no
This field is usually only needed when the answer is yes, and is
commonly injected by the archive software. It denotes a package
that is required when building other packages.
Architecture: arch|all (required)
The architecture specifies which type of hardware this package was
compiled for. Common architectures are amd64, armel, i386, powerpc,
etc. Note that the all value is meant for packages that are
architecture independent. Some examples of this are shell and Perl
scripts, and documentation.
Origin: name
The name of the distribution this package is originating from.
Bugs: url
The url of the bug tracking system for this package. The current
used format is bts-type://bts-address, like
debbugs://bugs.debian.org.
Homepage: url
The upstream project home page url.
Tag: tag-list
List of tags describing the qualities of the package. The
description and list of supported tags can be found in the debtags
package.
Multi-Arch: no|same|foreign|allowed
This field is used to indicate how this package should behave on a
multi-arch installations.
no This value is the default when the field is omitted, in which
case adding the field with an explicit no value is generally not
needed.
same
This package is co-installable with itself, but it must not be
used to satisfy the dependency of any package of a different
architecture from itself.
foreign
This package is not co-installable with itself, but should be
allowed to satisfy a non-arch-qualified dependency of a package
of a different arch from itself (if a dependency has an explicit
arch-qualifier then the value foreign is ignored).
allowed
This allows reverse-dependencies to indicate in their Depends
field that they accept this package from a foreign architecture
by qualifying the package name with :any, but has no effect
otherwise.
Source: source-name [(source-version)]
The name of the source package that this binary package came from,
if it is different than the name of the package itself. If the
source version differs from the binary version, then the source-name
will be followed by a source-version in parenthesis. This can
happen for example on a binary-only non-maintainer upload, or when
setting a different binary version via «dpkg-gencontrol -v».
Subarchitecture: value
Kernel-Version: value
Installer-Menu-Item: value
These fields are used by the debian-installer and are usually not
needed. For more details about them, see
<https://salsa.debian.org/installer-team/debian-installer/-/raw/master/doc/devel/modules.txt>.
Depends: package-list
List of packages that are required for this package to provide a
non-trivial amount of functionality. The package maintenance
software will not allow a package to be installed if the packages
listed in its Depends field aren't installed (at least not without
using the force options). In an installation, the postinst scripts
of packages listed in Depends fields are run before those of the
packages which depend on them. On the opposite, in a removal, the
prerm script of a package is run before those of the packages listed
in its Depends field.
Pre-Depends: package-list
List of packages that must be installed and configured before this
one can be installed. This is usually used in the case where this
package requires another package for running its preinst script.
Recommends: package-list
Lists packages that would be found together with this one in all but
unusual installations. The package maintenance software will warn
the user if they install a package without those listed in its
Recommends field.
Suggests: package-list
Lists packages that are related to this one and can perhaps enhance
its usefulness, but without which installing this package is
perfectly reasonable.
The syntax of Depends, Pre-Depends, Recommends and Suggests fields is a
list of groups of alternative packages. Each group is a list of
packages separated by vertical bar (or “pipe”) symbols, ‘|’. The groups
are separated by commas. Commas are to be read as “AND”, and pipes as
“OR”, with pipes binding more tightly. Each package name is optionally
followed by an architecture qualifier appended after a colon ‘:’,
optionally followed by a version number specification in parentheses.
An architecture qualifier name can be a real Debian architecture name
(since dpkg 1.16.5) or any (since dpkg 1.16.2). If omitted, the default
is the current binary package architecture. A real Debian architecture
name will match exactly that architecture for that package name, any
will match any architecture for that package name if the package has
been marked as Multi-Arch: allowed.
A version number may start with a ‘>>’, in which case any later version
will match, and may specify or omit the Debian packaging revision
(separated by a hyphen). Accepted version relationships are ‘>>’ for
greater than, ‘<<’ for less than, ‘>=’ for greater than or equal to,
‘<=’ for less than or equal to, and ‘=’ for equal to.
Breaks: package-list
Lists packages that this one breaks, for example by exposing bugs
when the named packages rely on this one. The package maintenance
software will not allow broken packages to be configured; generally
the resolution is to upgrade the packages named in a Breaks field.
Conflicts: package-list
Lists packages that conflict with this one, for example by
containing files with the same names. The package maintenance
software will not allow conflicting packages to be installed at the
same time. Two conflicting packages should each include a Conflicts
line mentioning the other.
Replaces: package-list
List of packages files from which this one replaces. This is used
for allowing this package to overwrite the files of another package
and is usually used with the Conflicts field to force removal of the
other package, if this one also has the same files as the conflicted
package.
The syntax of Breaks, Conflicts and Replaces is a list of package names,
separated by commas (and optional whitespace). In the Breaks and
Conflicts fields, the comma should be read as “OR”. An optional
architecture qualifier can also be appended to the package name with the
same syntax as above, but the default is any instead of the binary
package architecture. An optional version can also be given with the
same syntax as above for the Breaks, Conflicts and Replaces fields.
Enhances: package-list
This is a list of packages that this one enhances. It is similar to
Suggests but in the opposite direction.
Provides: package-list
This is a list of virtual packages that this one provides. Usually
this is used in the case of several packages all providing the same
service. For example, sendmail and exim can serve as a mail server,
so they provide a common package (“mail-transport-agent”) on which
other packages can depend. This will allow sendmail or exim to
serve as a valid option to satisfy the dependency. This prevents
the packages that depend on a mail server from having to know the
package names for all of them, and using ‘|’ to separate the list.
The syntax of Provides is a list of package names, separated by commas
(and optional whitespace). An optional architecture qualifier can also
be appended to the package name with the same syntax as above. If
omitted, the default is the current binary package architecture. An
optional exact (equal to) version can also be given with the same syntax
as above (honored since dpkg 1.17.11).
Built-Using: package-list
This dependency field lists extra source packages that were used
during the build of this binary package, for license compliance
purposes. This is an indication to the archive maintenance software
that these extra source packages must be kept whilst this binary
package is maintained. This field must be a comma-separated list of
source package names with strict ‘=’ version relationships enclosed
within parenthesis. Note that the archive maintenance software is
likely to refuse to accept an upload which declares a Built-Using
relationship which cannot be satisfied within the archive.
Static-Built-Using: package-list
This dependency field lists extra source packages that were used
during the build of this binary package, for static building
purposes (for example linking against static libraries, builds for
source-centered languages such as Go or Rust, usage of header-only
C/C++ libraries, injecting data blobs into code, etc.). This is
useful to track whether this package might need to be rebuilt when
source packages listed here have been updated, for example due to
security updates. This field must be a comma-separated list of
source package names with strict ‘=’ version relationships enclosed
within parenthesis.
Supported since dpkg 1.21.3.
Built-For-Profiles: profile-list (obsolete)
This field used to specify a whitespace separated list of build
profiles that this binary packages was built with (since dpkg 1.17.2
until 1.18.18). The information previously found in this field can
now be found in the .buildinfo file, which supersedes it.
Auto-Built-Package: reason-list
This field specifies a whitespace separated list of reasons why this
package was auto-generated. Binary packages marked with this field
will not appear in the debian/control template source control file.
The only currently used reason is debug-symbols.
Build-Ids: elf-build-id-list
This field specifies a whitespace separated list of ELF build-ids.
These are unique identifiers for semantically identical ELF objects,
for each of these within the package.
The format or the way to compute each build-id is not defined by
design.
EXAMPLE
Package: grep
Essential: yes
Priority: required
Section: base
Maintainer: Wichert Akkerman <wakkerma@debian.org>
Architecture: sparc
Version: 2.4-1
Pre-Depends: libc6 (>= 2.0.105)
Provides: rgrep
Conflicts: rgrep
Description: GNU grep, egrep and fgrep.
The GNU family of grep utilities may be the "fastest grep in the west".
GNU grep is based on a fast lazy-state deterministic matcher (about
twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
search for a fixed string that eliminates impossible text from being
considered by the full regexp matcher without necessarily having to
look at every character. The result is typically many times faster
than Unix grep or egrep. (Regular expressions containing backreferencing
will run more slowly, however).
BUGS
The Build-Ids field uses a rather generic name out of its original
context within an ELF object, which serves a very specific purpose and
executable format.
SEE ALSO
deb822(5), deb-src-control(5), deb(5), deb-version(7), debtags(1),
dpkg(1), dpkg-deb(1).
1.22.21 2025-06-30 deb-control(5)
Generated by dwww version 1.16 on Tue Dec 16 04:52:44 CET 2025.