CMSG(3) Library Functions Manual CMSG(3)
NAME
CMSG_ALIGN, CMSG_SPACE, CMSG_NXTHDR, CMSG_FIRSTHDR - access ancillary
data
LIBRARY
Standard C library (libc, -lc)
SYNOPSIS
#include <sys/socket.h>
struct cmsghdr *CMSG_FIRSTHDR(struct msghdr *msgh);
struct cmsghdr *CMSG_NXTHDR(struct msghdr *msgh,
struct cmsghdr *cmsg);
size_t CMSG_ALIGN(size_t length);
size_t CMSG_SPACE(size_t length);
size_t CMSG_LEN(size_t length);
unsigned char *CMSG_DATA(struct cmsghdr *cmsg);
DESCRIPTION
These macros are used to create and access control messages (also called
ancillary data) that are not a part of the socket payload. This control
information may include the interface the packet was received on, vari-
ous rarely used header fields, an extended error description, a set of
file descriptors, or UNIX credentials. For instance, control messages
can be used to send additional header fields such as IP options. Ancil-
lary data is sent by calling sendmsg(2) and received by calling
recvmsg(2). See their manual pages for more information.
Ancillary data is a sequence of cmsghdr structures with appended data.
See the specific protocol man pages for the available control message
types. The maximum ancillary buffer size allowed per socket can be set
using /proc/sys/net/core/optmem_max; see socket(7).
The cmsghdr structure is defined as follows:
struct cmsghdr {
size_t cmsg_len; /* Data byte count, including header
(type is socklen_t in POSIX) */
int cmsg_level; /* Originating protocol */
int cmsg_type; /* Protocol-specific type */
/* followed by
unsigned char cmsg_data[]; */
};
The sequence of cmsghdr structures should never be accessed directly.
Instead, use only the following macros:
CMSG_FIRSTHDR()
returns a pointer to the first cmsghdr in the ancillary data
buffer associated with the passed msghdr. It returns NULL if
there isn't enough space for a cmsghdr in the buffer.
CMSG_NXTHDR()
returns the next valid cmsghdr after the passed cmsghdr. It re-
turns NULL when there isn't enough space left in the buffer.
When initializing a buffer that will contain a series of cmsghdr
structures (e.g., to be sent with sendmsg(2)), that buffer should
first be zero-initialized to ensure the correct operation of
CMSG_NXTHDR().
CMSG_ALIGN(),
given a length, returns it including the required alignment.
This is a constant expression.
CMSG_SPACE()
returns the number of bytes an ancillary element with payload of
the passed data length occupies. This is a constant expression.
CMSG_DATA()
returns a pointer to the data portion of a cmsghdr. The pointer
returned cannot be assumed to be suitably aligned for accessing
arbitrary payload data types. Applications should not cast it to
a pointer type matching the payload, but should instead use mem-
cpy(3) to copy data to or from a suitably declared object.
CMSG_LEN()
returns the value to store in the cmsg_len member of the cmsghdr
structure, taking into account any necessary alignment. It takes
the data length as an argument. This is a constant expression.
To create ancillary data, first initialize the msg_controllen member of
the msghdr with the length of the control message buffer. Use
CMSG_FIRSTHDR() on the msghdr to get the first control message and
CMSG_NXTHDR() to get all subsequent ones. In each control message, ini-
tialize cmsg_len (with CMSG_LEN()), the other cmsghdr header fields, and
the data portion using CMSG_DATA(). Finally, the msg_controllen field
of the msghdr should be set to the sum of the CMSG_SPACE() of the length
of all control messages in the buffer. For more information on the ms-
ghdr, see recvmsg(2).
VERSIONS
For portability, ancillary data should be accessed using only the macros
described here.
In Linux, CMSG_LEN(), CMSG_DATA(), and CMSG_ALIGN() are constant expres-
sions (assuming their argument is constant), meaning that these values
can be used to declare the size of global variables. This may not be
portable, however.
STANDARDS
CMSG_FIRSTHDR()
CMSG_NXTHDR()
CMSG_DATA()
POSIX.1-2008.
CMSG_SPACE()
CMSG_LEN()
CMSG_ALIGN()
Linux.
HISTORY
This ancillary data model conforms to the POSIX.1g draft, 4.4BSD-Lite,
the IPv6 advanced API described in RFC 2292 and SUSv2.
CMSG_SPACE() and CMSG_LEN() will be included in the next POSIX release
(Issue 8).
EXAMPLES
This code looks for the IP_TTL option in a received ancillary buffer:
struct msghdr msgh;
struct cmsghdr *cmsg;
int received_ttl;
/* Receive auxiliary data in msgh */
for (cmsg = CMSG_FIRSTHDR(&msgh); cmsg != NULL;
cmsg = CMSG_NXTHDR(&msgh, cmsg)) {
if (cmsg->cmsg_level == IPPROTO_IP
&& cmsg->cmsg_type == IP_TTL) {
memcpy(&receive_ttl, CMSG_DATA(cmsg), sizeof(received_ttl));
break;
}
}
if (cmsg == NULL) {
/* Error: IP_TTL not enabled or small buffer or I/O error */
}
The code below passes an array of file descriptors over a UNIX domain
socket using SCM_RIGHTS:
struct msghdr msg = { 0 };
struct cmsghdr *cmsg;
int myfds[NUM_FD]; /* Contains the file descriptors to pass */
char iobuf[1];
struct iovec io = {
.iov_base = iobuf,
.iov_len = sizeof(iobuf)
};
union { /* Ancillary data buffer, wrapped in a union
in order to ensure it is suitably aligned */
char buf[CMSG_SPACE(sizeof(myfds))];
struct cmsghdr align;
} u;
msg.msg_iov = &io;
msg.msg_iovlen = 1;
msg.msg_control = u.buf;
msg.msg_controllen = sizeof(u.buf);
cmsg = CMSG_FIRSTHDR(&msg);
cmsg->cmsg_level = SOL_SOCKET;
cmsg->cmsg_type = SCM_RIGHTS;
cmsg->cmsg_len = CMSG_LEN(sizeof(myfds));
memcpy(CMSG_DATA(cmsg), myfds, sizeof(myfds));
For a complete code example that shows passing of file descriptors over
a UNIX domain socket, see seccomp_unotify(2).
SEE ALSO
recvmsg(2), sendmsg(2)
RFC 2292
Linux man-pages 6.9.1 2024-05-02 CMSG(3)
Generated by dwww version 1.16 on Tue Dec 16 03:57:32 CET 2025.