BASH-BUILTINS(7) Miscellaneous Information Manual BASH-BUILTINS(7)
NAME
bash-builtins - bash built-in commands, see bash(1)
SYNOPSIS
bash defines the following built-in commands: :, ., [, alias, bg, bind,
break, builtin, case, cd, command, compgen, complete, continue, declare,
dirs, disown, echo, enable, eval, exec, exit, export, fc, fg, getopts,
hash, help, history, if, jobs, kill, let, local, logout, popd, printf,
pushd, pwd, read, readonly, return, set, shift, shopt, source, suspend,
test, times, trap, type, typeset, ulimit, umask, unalias, unset, until,
wait, while.
BASH BUILTIN COMMANDS
Unless otherwise noted, each builtin command documented in this section
as accepting options preceded by - accepts -- to signify the end of the
options. The :, true, false, and test/[ builtins do not accept options
and do not treat -- specially. The exit, logout, return, break, con-
tinue, let, and shift builtins accept and process arguments beginning
with - without requiring --. Other builtins that accept arguments but
are not specified as accepting options interpret arguments beginning
with - as invalid options and require -- to prevent this interpretation.
: [arguments]
No effect; the command does nothing beyond expanding arguments
and performing any specified redirections. The return status is
zero.
. filename [arguments]
source filename [arguments]
Read and execute commands from filename in the current shell en-
vironment and return the exit status of the last command executed
from filename. If filename does not contain a slash, filenames
in PATH are used to find the directory containing filename, but
filename does not need to be executable. The file searched for
in PATH need not be executable. When bash is not in posix mode,
it searches the current directory if no file is found in PATH.
If the sourcepath option to the shopt builtin command is turned
off, the PATH is not searched. If any arguments are supplied,
they become the positional parameters when filename is executed.
Otherwise the positional parameters are unchanged. If the -T op-
tion is enabled, . inherits any trap on DEBUG; if it is not, any
DEBUG trap string is saved and restored around the call to ., and
. unsets the DEBUG trap while it executes. If -T is not set, and
the sourced file changes the DEBUG trap, the new value is re-
tained when . completes. The return status is the status of the
last command exited within the script (0 if no commands are exe-
cuted), and false if filename is not found or cannot be read.
alias [-p] [name[=value] ...]
Alias with no arguments or with the -p option prints the list of
aliases in the form alias name=value on standard output. When
arguments are supplied, an alias is defined for each name whose
value is given. A trailing space in value causes the next word
to be checked for alias substitution when the alias is expanded.
For each name in the argument list for which no value is sup-
plied, the name and value of the alias is printed. Alias returns
true unless a name is given for which no alias has been defined.
bg [jobspec ...]
Resume each suspended job jobspec in the background, as if it had
been started with &. If jobspec is not present, the shell's no-
tion of the current job is used. bg jobspec returns 0 unless run
when job control is disabled or, when run with job control en-
abled, any specified jobspec was not found or was started without
job control.
bind [-m keymap] [-lpsvPSVX]
bind [-m keymap] [-q function] [-u function] [-r keyseq]
bind [-m keymap] -f filename
bind [-m keymap] -x keyseq:shell-command
bind [-m keymap] keyseq:function-name
bind [-m keymap] keyseq:readline-command
bind readline-command-line
Display current readline key and function bindings, bind a key
sequence to a readline function or macro, or set a readline vari-
able. Each non-option argument is a command as it would appear
in a readline initialization file such as .inputrc, but each
binding or command must be passed as a separate argument; e.g.,
'"\C-x\C-r": re-read-init-file'. Options, if supplied, have the
following meanings:
-m keymap
Use keymap as the keymap to be affected by the subsequent
bindings. Acceptable keymap names are emacs, emacs-stan-
dard, emacs-meta, emacs-ctlx, vi, vi-move, vi-command, and
vi-insert. vi is equivalent to vi-command (vi-move is
also a synonym); emacs is equivalent to emacs-standard.
-l List the names of all readline functions.
-p Display readline function names and bindings in such a way
that they can be re-read.
-P List current readline function names and bindings.
-s Display readline key sequences bound to macros and the
strings they output in such a way that they can be re-
read.
-S Display readline key sequences bound to macros and the
strings they output.
-v Display readline variable names and values in such a way
that they can be re-read.
-V List current readline variable names and values.
-f filename
Read key bindings from filename.
-q function
Query about which keys invoke the named function.
-u function
Unbind all keys bound to the named function.
-r keyseq
Remove any current binding for keyseq.
-x keyseq:shell-command
Cause shell-command to be executed whenever keyseq is en-
tered. When shell-command is executed, the shell sets the
READLINE_LINE variable to the contents of the readline
line buffer and the READLINE_POINT and READLINE_MARK vari-
ables to the current location of the insertion point and
the saved insertion point (the mark), respectively. The
shell assigns any numeric argument the user supplied to
the READLINE_ARGUMENT variable. If there was no argument,
that variable is not set. If the executed command changes
the value of any of READLINE_LINE, READLINE_POINT, or
READLINE_MARK, those new values will be reflected in the
editing state.
-X List all key sequences bound to shell commands and the as-
sociated commands in a format that can be reused as input.
The return value is 0 unless an unrecognized option is given or
an error occurred.
break [n]
Exit from within a for, while, until, or select loop. If n is
specified, break n levels. n must be ≥ 1. If n is greater than
the number of enclosing loops, all enclosing loops are exited.
The return value is 0 unless n is not greater than or equal to 1.
builtin shell-builtin [arguments]
Execute the specified shell builtin, passing it arguments, and
return its exit status. This is useful when defining a function
whose name is the same as a shell builtin, retaining the func-
tionality of the builtin within the function. The cd builtin is
commonly redefined this way. The return status is false if
shell-builtin is not a shell builtin command.
caller [expr]
Returns the context of any active subroutine call (a shell func-
tion or a script executed with the . or source builtins). With-
out expr, caller displays the line number and source filename of
the current subroutine call. If a non-negative integer is sup-
plied as expr, caller displays the line number, subroutine name,
and source file corresponding to that position in the current ex-
ecution call stack. This extra information may be used, for ex-
ample, to print a stack trace. The current frame is frame 0.
The return value is 0 unless the shell is not executing a subrou-
tine call or expr does not correspond to a valid position in the
call stack.
cd [-L|[-P [-e]] [-@]] [dir]
Change the current directory to dir. if dir is not supplied, the
value of the HOME shell variable is the default. The variable
CDPATH defines the search path for the directory containing dir:
each directory name in CDPATH is searched for dir. Alternative
directory names in CDPATH are separated by a colon (:). A null
directory name in CDPATH is the same as the current directory,
i.e., ``.''. If dir begins with a slash (/), then CDPATH is not
used. The -P option causes cd to use the physical directory
structure by resolving symbolic links while traversing dir and
before processing instances of .. in dir (see also the -P option
to the set builtin command); the -L option forces symbolic links
to be followed by resolving the link after processing instances
of .. in dir. If .. appears in dir, it is processed by removing
the immediately previous pathname component from dir, back to a
slash or the beginning of dir. If the -e option is supplied with
-P, and the current working directory cannot be successfully de-
termined after a successful directory change, cd will return an
unsuccessful status. On systems that support it, the -@ option
presents the extended attributes associated with a file as a di-
rectory. An argument of - is converted to $OLDPWD before the di-
rectory change is attempted. If a non-empty directory name from
CDPATH is used, or if - is the first argument, and the directory
change is successful, the absolute pathname of the new working
directory is written to the standard output. If the directory
change is successful, cd sets the value of the PWD environment
variable to the new directory name, and sets the OLDPWD environ-
ment variable to the value of the current working directory be-
fore the change. The return value is true if the directory was
successfully changed; false otherwise.
command [-pVv] command [arg ...]
Run command with args suppressing the normal shell function
lookup. Only builtin commands or commands found in the PATH are
executed. If the -p option is given, the search for command is
performed using a default value for PATH that is guaranteed to
find all of the standard utilities. If either the -V or -v op-
tion is supplied, a description of command is printed. The -v
option causes a single word indicating the command or filename
used to invoke command to be displayed; the -V option produces a
more verbose description. If the -V or -v option is supplied,
the exit status is 0 if command was found, and 1 if not. If nei-
ther option is supplied and an error occurred or command cannot
be found, the exit status is 127. Otherwise, the exit status of
the command builtin is the exit status of command.
compgen [option] [word]
Generate possible completion matches for word according to the
options, which may be any option accepted by the complete builtin
with the exception of -p and -r, and write the matches to the
standard output. When using the -F or -C options, the various
shell variables set by the programmable completion facilities,
while available, will not have useful values.
The matches will be generated in the same way as if the program-
mable completion code had generated them directly from a comple-
tion specification with the same flags. If word is specified,
only those completions matching word will be displayed.
The return value is true unless an invalid option is supplied, or
no matches were generated.
complete [-abcdefgjksuv] [-o comp-option] [-DEI] [-A action] [-G glob-
pat] [-W wordlist]
[-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix]
name [name ...]
complete -pr [-DEI] [name ...]
Specify how arguments to each name should be completed. If the
-p option is supplied, or if no options are supplied, existing
completion specifications are printed in a way that allows them
to be reused as input. The -r option removes a completion speci-
fication for each name, or, if no names are supplied, all comple-
tion specifications. The -D option indicates that other supplied
options and actions should apply to the ``default'' command com-
pletion; that is, completion attempted on a command for which no
completion has previously been defined. The -E option indicates
that other supplied options and actions should apply to ``empty''
command completion; that is, completion attempted on a blank
line. The -I option indicates that other supplied options and
actions should apply to completion on the initial non-assignment
word on the line, or after a command delimiter such as ; or |,
which is usually command name completion. If multiple options
are supplied, the -D option takes precedence over -E, and both
take precedence over -I. If any of -D, -E, or -I are supplied,
any other name arguments are ignored; these completions only ap-
ply to the case specified by the option.
The process of applying these completion specifications when word
completion is attempted is described in bash(1).
Other options, if specified, have the following meanings. The
arguments to the -G, -W, and -X options (and, if necessary, the
-P and -S options) should be quoted to protect them from expan-
sion before the complete builtin is invoked.
-o comp-option
The comp-option controls several aspects of the comp-
spec's behavior beyond the simple generation of comple-
tions. comp-option may be one of:
bashdefault
Perform the rest of the default bash completions
if the compspec generates no matches.
default Use readline's default filename completion if the
compspec generates no matches.
dirnames
Perform directory name completion if the compspec
generates no matches.
filenames
Tell readline that the compspec generates file-
names, so it can perform any filename-specific
processing (like adding a slash to directory
names, quoting special characters, or suppressing
trailing spaces). Intended to be used with shell
functions.
noquote Tell readline not to quote the completed words if
they are filenames (quoting filenames is the de-
fault).
nosort Tell readline not to sort the list of possible
completions alphabetically.
nospace Tell readline not to append a space (the default)
to words completed at the end of the line.
plusdirs
After any matches defined by the compspec are
generated, directory name completion is attempted
and any matches are added to the results of the
other actions.
-A action
The action may be one of the following to generate a list
of possible completions:
alias Alias names. May also be specified as -a.
arrayvar
Array variable names.
binding Readline key binding names.
builtin Names of shell builtin commands. May also be
specified as -b.
command Command names. May also be specified as -c.
directory
Directory names. May also be specified as -d.
disabled
Names of disabled shell builtins.
enabled Names of enabled shell builtins.
export Names of exported shell variables. May also be
specified as -e.
file File names. May also be specified as -f.
function
Names of shell functions.
group Group names. May also be specified as -g.
helptopic
Help topics as accepted by the help builtin.
hostname
Hostnames, as taken from the file specified by
the HOSTFILE shell variable.
job Job names, if job control is active. May also be
specified as -j.
keyword Shell reserved words. May also be specified as
-k.
running Names of running jobs, if job control is active.
service Service names. May also be specified as -s.
setopt Valid arguments for the -o option to the set
builtin.
shopt Shell option names as accepted by the shopt
builtin.
signal Signal names.
stopped Names of stopped jobs, if job control is active.
user User names. May also be specified as -u.
variable
Names of all shell variables. May also be speci-
fied as -v.
-C command
command is executed in a subshell environment, and its
output is used as the possible completions. Arguments
are passed as with the -F option.
-F function
The shell function function is executed in the current
shell environment. When the function is executed, the
first argument ($1) is the name of the command whose ar-
guments are being completed, the second argument ($2) is
the word being completed, and the third argument ($3) is
the word preceding the word being completed on the cur-
rent command line. When it finishes, the possible com-
pletions are retrieved from the value of the COMPREPLY
array variable.
-G globpat
The pathname expansion pattern globpat is expanded to
generate the possible completions.
-P prefix
prefix is added at the beginning of each possible comple-
tion after all other options have been applied.
-S suffix
suffix is appended to each possible completion after all
other options have been applied.
-W wordlist
The wordlist is split using the characters in the IFS
special variable as delimiters, and each resultant word
is expanded. Shell quoting is honored within wordlist,
in order to provide a mechanism for the words to contain
shell metacharacters or characters in the value of IFS.
The possible completions are the members of the resultant
list which match the word being completed.
-X filterpat
filterpat is a pattern as used for pathname expansion.
It is applied to the list of possible completions gener-
ated by the preceding options and arguments, and each
completion matching filterpat is removed from the list.
A leading ! in filterpat negates the pattern; in this
case, any completion not matching filterpat is removed.
The return value is true unless an invalid option is supplied, an
option other than -p or -r is supplied without a name argument,
an attempt is made to remove a completion specification for a
name for which no specification exists, or an error occurs adding
a completion specification.
compopt [-o option] [-DEI] [+o option] [name]
Modify completion options for each name according to the options,
or for the currently-executing completion if no names are sup-
plied. If no options are given, display the completion options
for each name or the current completion. The possible values of
option are those valid for the complete builtin described above.
The -D option indicates that other supplied options should apply
to the ``default'' command completion; that is, completion at-
tempted on a command for which no completion has previously been
defined. The -E option indicates that other supplied options
should apply to ``empty'' command completion; that is, completion
attempted on a blank line. The -I option indicates that other
supplied options should apply to completion on the initial non-
assignment word on the line, or after a command delimiter such as
; or |, which is usually command name completion.
The return value is true unless an invalid option is supplied, an
attempt is made to modify the options for a name for which no
completion specification exists, or an output error occurs.
continue [n]
Resume the next iteration of the enclosing for, while, until, or
select loop. If n is specified, resume at the nth enclosing
loop. n must be ≥ 1. If n is greater than the number of enclos-
ing loops, the last enclosing loop (the ``top-level'' loop) is
resumed. The return value is 0 unless n is not greater than or
equal to 1.
declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]
typeset [-aAfFgiIlnrtux] [-p] [name[=value] ...]
Declare variables and/or give them attributes. If no names are
given then display the values of variables. The -p option will
display the attributes and values of each name. When -p is used
with name arguments, additional options, other than -f and -F,
are ignored. When -p is supplied without name arguments, it will
display the attributes and values of all variables having the at-
tributes specified by the additional options. If no other op-
tions are supplied with -p, declare will display the attributes
and values of all shell variables. The -f option will restrict
the display to shell functions. The -F option inhibits the dis-
play of function definitions; only the function name and attrib-
utes are printed. If the extdebug shell option is enabled using
shopt, the source file name and line number where each name is
defined are displayed as well. The -F option implies -f. The -g
option forces variables to be created or modified at the global
scope, even when declare is executed in a shell function. It is
ignored in all other cases. The -I option causes local variables
to inherit the attributes (except the nameref attribute) and
value of any existing variable with the same name at a surround-
ing scope. If there is no existing variable, the local variable
is initially unset. The following options can be used to re-
strict output to variables with the specified attribute or to
give variables attributes:
-a Each name is an indexed array variable (see Arrays in
bash(1)).
-A Each name is an associative array variable (see Arrays in
bash(1)).
-f Use function names only.
-i The variable is treated as an integer; arithmetic evalua-
tion (see ARITHMETIC EVALUATION in bash(1)) is performed
when the variable is assigned a value.
-l When the variable is assigned a value, all upper-case
characters are converted to lower-case. The upper-case
attribute is disabled.
-n Give each name the nameref attribute, making it a name
reference to another variable. That other variable is de-
fined by the value of name. All references, assignments,
and attribute modifications to name, except those using or
changing the -n attribute itself, are performed on the
variable referenced by name's value. The nameref at-
tribute cannot be applied to array variables.
-r Make names readonly. These names cannot then be assigned
values by subsequent assignment statements or unset.
-t Give each name the trace attribute. Traced functions in-
herit the DEBUG and RETURN traps from the calling shell.
The trace attribute has no special meaning for variables.
-u When the variable is assigned a value, all lower-case
characters are converted to upper-case. The lower-case
attribute is disabled.
-x Mark names for export to subsequent commands via the envi-
ronment.
Using `+' instead of `-' turns off the attribute instead, with
the exceptions that +a and +A may not be used to destroy array
variables and +r will not remove the readonly attribute. When
used in a function, declare and typeset make each name local, as
with the local command, unless the -g option is supplied. If a
variable name is followed by =value, the value of the variable is
set to value. When using -a or -A and the compound assignment
syntax to create array variables, additional attributes do not
take effect until subsequent assignments. The return value is 0
unless an invalid option is encountered, an attempt is made to
define a function using ``-f foo=bar'', an attempt is made to as-
sign a value to a readonly variable, an attempt is made to assign
a value to an array variable without using the compound assign-
ment syntax (see Arrays in bash(1)), one of the names is not a
valid shell variable name, an attempt is made to turn off read-
only status for a readonly variable, an attempt is made to turn
off array status for an array variable, or an attempt is made to
display a non-existent function with -f.
dirs [-clpv] [+n] [-n]
Without options, displays the list of currently remembered direc-
tories. The default display is on a single line with directory
names separated by spaces. Directories are added to the list
with the pushd command; the popd command removes entries from the
list. The current directory is always the first directory in the
stack.
-c Clears the directory stack by deleting all of the entries.
-l Produces a listing using full pathnames; the default list-
ing format uses a tilde to denote the home directory.
-p Print the directory stack with one entry per line.
-v Print the directory stack with one entry per line, prefix-
ing each entry with its index in the stack.
+n Displays the nth entry counting from the left of the list
shown by dirs when invoked without options, starting with
zero.
-n Displays the nth entry counting from the right of the list
shown by dirs when invoked without options, starting with
zero.
The return value is 0 unless an invalid option is supplied or n
indexes beyond the end of the directory stack.
disown [-ar] [-h] [jobspec ... | pid ... ]
Without options, remove each jobspec from the table of active
jobs. If jobspec is not present, and neither the -a nor the -r
option is supplied, the current job is used. If the -h option is
given, each jobspec is not removed from the table, but is marked
so that SIGHUP is not sent to the job if the shell receives a
SIGHUP. If no jobspec is supplied, the -a option means to remove
or mark all jobs; the -r option without a jobspec argument re-
stricts operation to running jobs. The return value is 0 unless
a jobspec does not specify a valid job.
echo [-neE] [arg ...]
Output the args, separated by spaces, followed by a newline. The
return status is 0 unless a write error occurs. If -n is speci-
fied, the trailing newline is suppressed. If the -e option is
given, interpretation of the following backslash-escaped charac-
ters is enabled. The -E option disables the interpretation of
these escape characters, even on systems where they are inter-
preted by default. The xpg_echo shell option may be used to dy-
namically determine whether or not echo expands these escape
characters by default. echo does not interpret -- to mean the
end of options. echo interprets the following escape sequences:
\a alert (bell)
\b backspace
\c suppress further output
\e
\E an escape character
\f form feed
\n new line
\r carriage return
\t horizontal tab
\v vertical tab
\\ backslash
\0nnn the eight-bit character whose value is the octal value nnn
(zero to three octal digits)
\xHH the eight-bit character whose value is the hexadecimal
value HH (one or two hex digits)
\uHHHH the Unicode (ISO/IEC 10646) character whose value is the
hexadecimal value HHHH (one to four hex digits)
\UHHHHHHHH
the Unicode (ISO/IEC 10646) character whose value is the
hexadecimal value HHHHHHHH (one to eight hex digits)
enable [-a] [-dnps] [-f filename] [name ...]
Enable and disable builtin shell commands. Disabling a builtin
allows a disk command which has the same name as a shell builtin
to be executed without specifying a full pathname, even though
the shell normally searches for builtins before disk commands.
If -n is used, each name is disabled; otherwise, names are en-
abled. For example, to use the test binary found via the PATH
instead of the shell builtin version, run ``enable -n test''.
The -f option means to load the new builtin command name from
shared object filename, on systems that support dynamic loading.
Bash will use the value of the BASH_LOADABLES_PATH variable as a
colon-separated list of directories in which to search for file-
name. The default is system-dependent. The -d option will
delete a builtin previously loaded with -f. If no name arguments
are given, or if the -p option is supplied, a list of shell
builtins is printed. With no other option arguments, the list
consists of all enabled shell builtins. If -n is supplied, only
disabled builtins are printed. If -a is supplied, the list
printed includes all builtins, with an indication of whether or
not each is enabled. If -s is supplied, the output is restricted
to the POSIX special builtins. If no options are supplied and a
name is not a shell builtin, enable will attempt to load name
from a shared object named name, as if the command were ``enable
-f name name . The return value is 0 unless a name is not a
shell builtin or there is an error loading a new builtin from a
shared object.
eval [arg ...]
The args are read and concatenated together into a single com-
mand. This command is then read and executed by the shell, and
its exit status is returned as the value of eval. If there are
no args, or only null arguments, eval returns 0.
exec [-cl] [-a name] [command [arguments]]
If command is specified, it replaces the shell. No new process
is created. The arguments become the arguments to command. If
the -l option is supplied, the shell places a dash at the begin-
ning of the zeroth argument passed to command. This is what lo-
gin(1) does. The -c option causes command to be executed with an
empty environment. If -a is supplied, the shell passes name as
the zeroth argument to the executed command. If command cannot
be executed for some reason, a non-interactive shell exits, un-
less the execfail shell option is enabled. In that case, it re-
turns failure. An interactive shell returns failure if the file
cannot be executed. A subshell exits unconditionally if exec
fails. If command is not specified, any redirections take effect
in the current shell, and the return status is 0. If there is a
redirection error, the return status is 1.
exit [n]
Cause the shell to exit with a status of n. If n is omitted, the
exit status is that of the last command executed. A trap on EXIT
is executed before the shell terminates.
export [-fn] [name[=word]] ...
export -p
The supplied names are marked for automatic export to the envi-
ronment of subsequently executed commands. If the -f option is
given, the names refer to functions. If no names are given, or
if the -p option is supplied, a list of names of all exported
variables is printed. The -n option causes the export property
to be removed from each name. If a variable name is followed by
=word, the value of the variable is set to word. export returns
an exit status of 0 unless an invalid option is encountered, one
of the names is not a valid shell variable name, or -f is sup-
plied with a name that is not a function.
fc [-e ename] [-lnr] [first] [last]
fc -s [pat=rep] [cmd]
The first form selects a range of commands from first to last
from the history list and displays or edits and re-executes them.
First and last may be specified as a string (to locate the last
command beginning with that string) or as a number (an index into
the history list, where a negative number is used as an offset
from the current command number). When listing, a first or last
of 0 is equivalent to -1 and -0 is equivalent to the current com-
mand (usually the fc command); otherwise 0 is equivalent to -1
and -0 is invalid. If last is not specified, it is set to the
current command for listing (so that ``fc -l -10'' prints the
last 10 commands) and to first otherwise. If first is not speci-
fied, it is set to the previous command for editing and -16 for
listing.
The -n option suppresses the command numbers when listing. The
-r option reverses the order of the commands. If the -l option
is given, the commands are listed on standard output. Otherwise,
the editor given by ename is invoked on a file containing those
commands. If ename is not given, the value of the FCEDIT vari-
able is used, and the value of EDITOR if FCEDIT is not set. If
neither variable is set, vi is used. When editing is complete,
the edited commands are echoed and executed.
In the second form, command is re-executed after each instance of
pat is replaced by rep. Command is interpreted the same as first
above. A useful alias to use with this is ``r="fc -s"'', so that
typing ``r cc'' runs the last command beginning with ``cc'' and
typing ``r'' re-executes the last command.
If the first form is used, the return value is 0 unless an in-
valid option is encountered or first or last specify history
lines out of range. If the -e option is supplied, the return
value is the value of the last command executed or failure if an
error occurs with the temporary file of commands. If the second
form is used, the return status is that of the command re-exe-
cuted, unless cmd does not specify a valid history line, in which
case fc returns failure.
fg [jobspec]
Resume jobspec in the foreground, and make it the current job.
If jobspec is not present, the shell's notion of the current job
is used. The return value is that of the command placed into the
foreground, or failure if run when job control is disabled or,
when run with job control enabled, if jobspec does not specify a
valid job or jobspec specifies a job that was started without job
control.
getopts optstring name [arg ...]
getopts is used by shell procedures to parse positional parame-
ters. optstring contains the option characters to be recognized;
if a character is followed by a colon, the option is expected to
have an argument, which should be separated from it by white
space. The colon and question mark characters may not be used as
option characters. Each time it is invoked, getopts places the
next option in the shell variable name, initializing name if it
does not exist, and the index of the next argument to be
processed into the variable OPTIND. OPTIND is initialized to 1
each time the shell or a shell script is invoked. When an option
requires an argument, getopts places that argument into the vari-
able OPTARG. The shell does not reset OPTIND automatically; it
must be manually reset between multiple calls to getopts within
the same shell invocation if a new set of parameters is to be
used.
When the end of options is encountered, getopts exits with a re-
turn value greater than zero. OPTIND is set to the index of the
first non-option argument, and name is set to ?.
getopts normally parses the positional parameters, but if more
arguments are supplied as arg values, getopts parses those in-
stead.
getopts can report errors in two ways. If the first character of
optstring is a colon, silent error reporting is used. In normal
operation, diagnostic messages are printed when invalid options
or missing option arguments are encountered. If the variable
OPTERR is set to 0, no error messages will be displayed, even if
the first character of optstring is not a colon.
If an invalid option is seen, getopts places ? into name and, if
not silent, prints an error message and unsets OPTARG. If
getopts is silent, the option character found is placed in OPTARG
and no diagnostic message is printed.
If a required argument is not found, and getopts is not silent, a
question mark (?) is placed in name, OPTARG is unset, and a diag-
nostic message is printed. If getopts is silent, then a colon
(:) is placed in name and OPTARG is set to the option character
found.
getopts returns true if an option, specified or unspecified, is
found. It returns false if the end of options is encountered or
an error occurs.
hash [-lr] [-p filename] [-dt] [name]
Each time hash is invoked, the full pathname of the command name
is determined by searching the directories in $PATH and remem-
bered. Any previously-remembered pathname is discarded. If the
-p option is supplied, no path search is performed, and filename
is used as the full filename of the command. The -r option
causes the shell to forget all remembered locations. The -d op-
tion causes the shell to forget the remembered location of each
name. If the -t option is supplied, the full pathname to which
each name corresponds is printed. If multiple name arguments are
supplied with -t, the name is printed before the hashed full
pathname. The -l option causes output to be displayed in a for-
mat that may be reused as input. If no arguments are given, or
if only -l is supplied, information about remembered commands is
printed. The return status is true unless a name is not found or
an invalid option is supplied.
help [-dms] [pattern]
Display helpful information about builtin commands. If pattern
is specified, help gives detailed help on all commands matching
pattern; otherwise help for all the builtins and shell control
structures is printed.
-d Display a short description of each pattern
-m Display the description of each pattern in a manpage-like
format
-s Display only a short usage synopsis for each pattern
The return status is 0 unless no command matches pattern.
history [n]
history -c
history -d offset
history -d start-end
history -anrw [filename]
history -p arg [arg ...]
history -s arg [arg ...]
With no options, display the command history list with line num-
bers. Lines listed with a * have been modified. An argument of
n lists only the last n lines. If the shell variable HISTTIME-
FORMAT is set and not null, it is used as a format string for
strftime(3) to display the time stamp associated with each dis-
played history entry. No intervening blank is printed between
the formatted time stamp and the history line. If filename is
supplied, it is used as the name of the history file; if not, the
value of HISTFILE is used. Options, if supplied, have the fol-
lowing meanings:
-c Clear the history list by deleting all the entries.
-d offset
Delete the history entry at position offset. If offset is
negative, it is interpreted as relative to one greater
than the last history position, so negative indices count
back from the end of the history, and an index of -1
refers to the current history -d command.
-d start-end
Delete the range of history entries between positions
start and end, inclusive. Positive and negative values
for start and end are interpreted as described above.
-a Append the ``new'' history lines to the history file.
These are history lines entered since the beginning of the
current bash session, but not already appended to the his-
tory file.
-n Read the history lines not already read from the history
file into the current history list. These are lines ap-
pended to the history file since the beginning of the cur-
rent bash session.
-r Read the contents of the history file and append them to
the current history list.
-w Write the current history list to the history file, over-
writing the history file's contents.
-p Perform history substitution on the following args and
display the result on the standard output. Does not store
the results in the history list. Each arg must be quoted
to disable normal history expansion.
-s Store the args in the history list as a single entry. The
last command in the history list is removed before the
args are added.
If the HISTTIMEFORMAT variable is set, the time stamp information
associated with each history entry is written to the history
file, marked with the history comment character. When the his-
tory file is read, lines beginning with the history comment char-
acter followed immediately by a digit are interpreted as time-
stamps for the following history entry. The return value is 0
unless an invalid option is encountered, an error occurs while
reading or writing the history file, an invalid offset or range
is supplied as an argument to -d, or the history expansion sup-
plied as an argument to -p fails.
jobs [-lnprs] [ jobspec ... ]
jobs -x command [ args ... ]
The first form lists the active jobs. The options have the fol-
lowing meanings:
-l List process IDs in addition to the normal information.
-n Display information only about jobs that have changed sta-
tus since the user was last notified of their status.
-p List only the process ID of the job's process group
leader.
-r Display only running jobs.
-s Display only stopped jobs.
If jobspec is given, output is restricted to information about
that job. The return status is 0 unless an invalid option is en-
countered or an invalid jobspec is supplied.
If the -x option is supplied, jobs replaces any jobspec found in
command or args with the corresponding process group ID, and exe-
cutes command passing it args, returning its exit status.
kill [-s sigspec | -n signum | -sigspec] [pid | jobspec] ...
kill -l|-L [sigspec | exit_status]
Send the signal named by sigspec or signum to the processes named
by pid or jobspec. sigspec is either a case-insensitive signal
name such as SIGKILL (with or without the SIG prefix) or a signal
number; signum is a signal number. If sigspec is not present,
then SIGTERM is assumed. An argument of -l lists the signal
names. If any arguments are supplied when -l is given, the names
of the signals corresponding to the arguments are listed, and the
return status is 0. The exit_status argument to -l is a number
specifying either a signal number or the exit status of a process
terminated by a signal. The -L option is equivalent to -l. kill
returns true if at least one signal was successfully sent, or
false if an error occurs or an invalid option is encountered.
let arg [arg ...]
Each arg is an arithmetic expression to be evaluated (see ARITH-
METIC EVALUATION in bash(1)). If the last arg evaluates to 0,
let returns 1; 0 is returned otherwise.
local [option] [name[=value] ... | - ]
For each argument, a local variable named name is created, and
assigned value. The option can be any of the options accepted by
declare. When local is used within a function, it causes the
variable name to have a visible scope restricted to that function
and its children. If name is -, the set of shell options is made
local to the function in which local is invoked: shell options
changed using the set builtin inside the function are restored to
their original values when the function returns. The restore is
effected as if a series of set commands were executed to restore
the values that were in place before the function. With no
operands, local writes a list of local variables to the standard
output. It is an error to use local when not within a function.
The return status is 0 unless local is used outside a function,
an invalid name is supplied, or name is a readonly variable.
logout Exit a login shell.
mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C
callback] [-c quantum] [array]
readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C
callback] [-c quantum] [array]
Read lines from the standard input into the indexed array vari-
able array, or from file descriptor fd if the -u option is sup-
plied. The variable MAPFILE is the default array. Options, if
supplied, have the following meanings:
-d The first character of delim is used to terminate each in-
put line, rather than newline. If delim is the empty
string, mapfile will terminate a line when it reads a NUL
character.
-n Copy at most count lines. If count is 0, all lines are
copied.
-O Begin assigning to array at index origin. The default in-
dex is 0.
-s Discard the first count lines read.
-t Remove a trailing delim (default newline) from each line
read.
-u Read lines from file descriptor fd instead of the standard
input.
-C Evaluate callback each time quantum lines are read. The
-c option specifies quantum.
-c Specify the number of lines read between each call to
callback.
If -C is specified without -c, the default quantum is 5000. When
callback is evaluated, it is supplied the index of the next array
element to be assigned and the line to be assigned to that ele-
ment as additional arguments. callback is evaluated after the
line is read but before the array element is assigned.
If not supplied with an explicit origin, mapfile will clear array
before assigning to it.
mapfile returns successfully unless an invalid option or option
argument is supplied, array is invalid or unassignable, or if ar-
ray is not an indexed array.
popd [-n] [+n] [-n]
Removes entries from the directory stack. The elements are num-
bered from 0 starting at the first directory listed by dirs.
With no arguments, popd removes the top directory from the stack,
and changes to the new top directory. Arguments, if supplied,
have the following meanings:
-n Suppresses the normal change of directory when removing
directories from the stack, so that only the stack is ma-
nipulated.
+n Removes the nth entry counting from the left of the list
shown by dirs, starting with zero, from the stack. For
example: ``popd +0'' removes the first directory, ``popd
+1'' the second.
-n Removes the nth entry counting from the right of the list
shown by dirs, starting with zero. For example: ``popd
-0'' removes the last directory, ``popd -1'' the next to
last.
If the top element of the directory stack is modified, and the -n
option was not supplied, popd uses the cd builtin to change to
the directory at the top of the stack. If the cd fails, popd re-
turns a non-zero value.
Otherwise, popd returns false if an invalid option is encoun-
tered, the directory stack is empty, or a non-existent directory
stack entry is specified.
If the popd command is successful, bash runs dirs to show the fi-
nal contents of the directory stack, and the return status is 0.
printf [-v var] format [arguments]
Write the formatted arguments to the standard output under the
control of the format. The -v option causes the output to be as-
signed to the variable var rather than being printed to the stan-
dard output.
The format is a character string which contains three types of
objects: plain characters, which are simply copied to standard
output, character escape sequences, which are converted and
copied to the standard output, and format specifications, each of
which causes printing of the next successive argument. In addi-
tion to the standard printf(1) format specifications, printf in-
terprets the following extensions:
%b causes printf to expand backslash escape sequences in the
corresponding argument in the same way as echo -e.
%q causes printf to output the corresponding argument in a
format that can be reused as shell input.
%Q like %q, but applies any supplied precision to the argu-
ment before quoting it.
%(datefmt)T
causes printf to output the date-time string resulting
from using datefmt as a format string for strftime(3).
The corresponding argument is an integer representing the
number of seconds since the epoch. Two special argument
values may be used: -1 represents the current time, and -2
represents the time the shell was invoked. If no argument
is specified, conversion behaves as if -1 had been given.
This is an exception to the usual printf behavior.
The %b, %q, and %T directives all use the field width and preci-
sion arguments from the format specification and write that many
bytes from (or use that wide a field for) the expanded argument,
which usually contains more characters than the original.
Arguments to non-string format specifiers are treated as C con-
stants, except that a leading plus or minus sign is allowed, and
if the leading character is a single or double quote, the value
is the ASCII value of the following character.
The format is reused as necessary to consume all of the argu-
ments. If the format requires more arguments than are supplied,
the extra format specifications behave as if a zero value or null
string, as appropriate, had been supplied. The return value is
zero on success, non-zero on failure.
pushd [-n] [+n] [-n]
pushd [-n] [dir]
Adds a directory to the top of the directory stack, or rotates
the stack, making the new top of the stack the current working
directory. With no arguments, pushd exchanges the top two ele-
ments of the directory stack. Arguments, if supplied, have the
following meanings:
-n Suppresses the normal change of directory when rotating or
adding directories to the stack, so that only the stack is
manipulated.
+n Rotates the stack so that the nth directory (counting from
the left of the list shown by dirs, starting with zero) is
at the top.
-n Rotates the stack so that the nth directory (counting from
the right of the list shown by dirs, starting with zero)
is at the top.
dir Adds dir to the directory stack at the top
After the stack has been modified, if the -n option was not sup-
plied, pushd uses the cd builtin to change to the directory at
the top of the stack. If the cd fails, pushd returns a non-zero
value.
Otherwise, if no arguments are supplied, pushd returns 0 unless
the directory stack is empty. When rotating the directory stack,
pushd returns 0 unless the directory stack is empty or a non-ex-
istent directory stack element is specified.
If the pushd command is successful, bash runs dirs to show the
final contents of the directory stack.
pwd [-LP]
Print the absolute pathname of the current working directory.
The pathname printed contains no symbolic links if the -P option
is supplied or the -o physical option to the set builtin command
is enabled. If the -L option is used, the pathname printed may
contain symbolic links. The return status is 0 unless an error
occurs while reading the name of the current directory or an in-
valid option is supplied.
read [-ers] [-a aname] [-d delim] [-i text] [-n nchars] [-N nchars] [-p
prompt] [-t timeout] [-u fd] [name ...]
One line is read from the standard input, or from the file de-
scriptor fd supplied as an argument to the -u option, split into
words as described in bash(1) under Word Splitting, and the first
word is assigned to the first name, the second word to the second
name, and so on. If there are more words than names, the remain-
ing words and their intervening delimiters are assigned to the
last name. If there are fewer words read from the input stream
than names, the remaining names are assigned empty values. The
characters in IFS are used to split the line into words using the
same rules the shell uses for expansion (described in bash(1) un-
der Word Splitting). The backslash character (\) may be used to
remove any special meaning for the next character read and for
line continuation. Options, if supplied, have the following
meanings:
-a aname
The words are assigned to sequential indices of the array
variable aname, starting at 0. aname is unset before any
new values are assigned. Other name arguments are ig-
nored.
-d delim
The first character of delim is used to terminate the in-
put line, rather than newline. If delim is the empty
string, read will terminate a line when it reads a NUL
character.
-e If the standard input is coming from a terminal, readline
(see READLINE in bash(1)) is used to obtain the line.
Readline uses the current (or default, if line editing was
not previously active) editing settings, but uses read-
line's default filename completion.
-i text
If readline is being used to read the line, text is placed
into the editing buffer before editing begins.
-n nchars
read returns after reading nchars characters rather than
waiting for a complete line of input, but honors a delim-
iter if fewer than nchars characters are read before the
delimiter.
-N nchars
read returns after reading exactly nchars characters
rather than waiting for a complete line of input, unless
EOF is encountered or read times out. Delimiter charac-
ters encountered in the input are not treated specially
and do not cause read to return until nchars characters
are read. The result is not split on the characters in
IFS; the intent is that the variable is assigned exactly
the characters read (with the exception of backslash; see
the -r option below).
-p prompt
Display prompt on standard error, without a trailing new-
line, before attempting to read any input. The prompt is
displayed only if input is coming from a terminal.
-r Backslash does not act as an escape character. The back-
slash is considered to be part of the line. In particu-
lar, a backslash-newline pair may not then be used as a
line continuation.
-s Silent mode. If input is coming from a terminal, charac-
ters are not echoed.
-t timeout
Cause read to time out and return failure if a complete
line of input (or a specified number of characters) is not
read within timeout seconds. timeout may be a decimal
number with a fractional portion following the decimal
point. This option is only effective if read is reading
input from a terminal, pipe, or other special file; it has
no effect when reading from regular files. If read times
out, read saves any partial input read into the specified
variable name. If timeout is 0, read returns immediately,
without trying to read any data. The exit status is 0 if
input is available on the specified file descriptor, or
the read will return EOF, non-zero otherwise. The exit
status is greater than 128 if the timeout is exceeded.
-u fd Read input from file descriptor fd.
If no names are supplied, the line read, without the ending de-
limiter but otherwise unmodified, is assigned to the variable RE-
PLY. The exit status is zero, unless end-of-file is encountered,
read times out (in which case the status is greater than 128), a
variable assignment error (such as assigning to a readonly vari-
able) occurs, or an invalid file descriptor is supplied as the
argument to -u.
readonly [-aAf] [-p] [name[=word] ...]
The given names are marked readonly; the values of these names
may not be changed by subsequent assignment. If the -f option is
supplied, the functions corresponding to the names are so marked.
The -a option restricts the variables to indexed arrays; the -A
option restricts the variables to associative arrays. If both
options are supplied, -A takes precedence. If no name arguments
are given, or if the -p option is supplied, a list of all read-
only names is printed. The other options may be used to restrict
the output to a subset of the set of readonly names. The -p op-
tion causes output to be displayed in a format that may be reused
as input. If a variable name is followed by =word, the value of
the variable is set to word. The return status is 0 unless an
invalid option is encountered, one of the names is not a valid
shell variable name, or -f is supplied with a name that is not a
function.
return [n]
Causes a function to stop executing and return the value speci-
fied by n to its caller. If n is omitted, the return status is
that of the last command executed in the function body. If re-
turn is executed by a trap handler, the last command used to de-
termine the status is the last command executed before the trap
handler. If return is executed during a DEBUG trap, the last
command used to determine the status is the last command executed
by the trap handler before return was invoked. If return is used
outside a function, but during execution of a script by the .
(source) command, it causes the shell to stop executing that
script and return either n or the exit status of the last command
executed within the script as the exit status of the script. If
n is supplied, the return value is its least significant 8 bits.
The return status is non-zero if return is supplied a non-numeric
argument, or is used outside a function and not during execution
of a script by . or source. Any command associated with the RE-
TURN trap is executed before execution resumes after the function
or script.
set [-abefhkmnptuvxBCEHPT] [-o option-name] [--] [-] [arg ...]
set [+abefhkmnptuvxBCEHPT] [+o option-name] [--] [-] [arg ...]
Without options, display the name and value of each shell vari-
able in a format that can be reused as input for setting or re-
setting the currently-set variables. Read-only variables cannot
be reset. In posix mode, only shell variables are listed. The
output is sorted according to the current locale. When options
are specified, they set or unset shell attributes. Any arguments
remaining after option processing are treated as values for the
positional parameters and are assigned, in order, to $1, $2, ...
$n. Options, if specified, have the following meanings:
-a Each variable or function that is created or modified is
given the export attribute and marked for export to the
environment of subsequent commands.
-b Report the status of terminated background jobs immedi-
ately, rather than before the next primary prompt. This
is effective only when job control is enabled.
-e Exit immediately if a pipeline (which may consist of a
single simple command), a list, or a compound command
(see SHELL GRAMMAR in bash(1)), exits with a non-zero
status. The shell does not exit if the command that
fails is part of the command list immediately following a
while or until keyword, part of the test following the if
or elif reserved words, part of any command executed in a
&& or || list except the command following the final &&
or ||, any command in a pipeline but the last, or if the
command's return value is being inverted with !. If a
compound command other than a subshell returns a non-zero
status because a command failed while -e was being ig-
nored, the shell does not exit. A trap on ERR, if set,
is executed before the shell exits. This option applies
to the shell environment and each subshell environment
separately (see COMMAND EXECUTION ENVIRONMENT in
bash(1)), and may cause subshells to exit before execut-
ing all the commands in the subshell.
If a compound command or shell function executes in a
context where -e is being ignored, none of the commands
executed within the compound command or function body
will be affected by the -e setting, even if -e is set and
a command returns a failure status. If a compound com-
mand or shell function sets -e while executing in a con-
text where -e is ignored, that setting will not have any
effect until the compound command or the command contain-
ing the function call completes.
-f Disable pathname expansion.
-h Remember the location of commands as they are looked up
for execution. This is enabled by default.
-k All arguments in the form of assignment statements are
placed in the environment for a command, not just those
that precede the command name.
-m Monitor mode. Job control is enabled. This option is on
by default for interactive shells on systems that support
it (see JOB CONTROL in bash(1)). All processes run in a
separate process group. When a background job completes,
the shell prints a line containing its exit status.
-n Read commands but do not execute them. This may be used
to check a shell script for syntax errors. This is ig-
nored by interactive shells.
-o option-name
The option-name can be one of the following:
allexport
Same as -a.
braceexpand
Same as -B.
emacs Use an emacs-style command line editing inter-
face. This is enabled by default when the shell
is interactive, unless the shell is started with
the --noediting option. This also affects the
editing interface used for read -e.
errexit Same as -e.
errtrace
Same as -E.
functrace
Same as -T.
hashall Same as -h.
histexpand
Same as -H.
history Enable command history, as described in bash(1)
under HISTORY. This option is on by default in
interactive shells.
ignoreeof
The effect is as if the shell command ``IG-
NOREEOF=10'' had been executed (see Shell Vari-
ables in bash(1)).
keyword Same as -k.
monitor Same as -m.
noclobber
Same as -C.
noexec Same as -n.
noglob Same as -f.
nolog Currently ignored.
notify Same as -b.
nounset Same as -u.
onecmd Same as -t.
physical
Same as -P.
pipefail
If set, the return value of a pipeline is the
value of the last (rightmost) command to exit
with a non-zero status, or zero if all commands
in the pipeline exit successfully. This option
is disabled by default.
posix Change the behavior of bash where the default op-
eration differs from the POSIX standard to match
the standard (posix mode). See SEE ALSO in
bash(1) for a reference to a document that de-
tails how posix mode affects bash's behavior.
privileged
Same as -p.
verbose Same as -v.
vi Use a vi-style command line editing interface.
This also affects the editing interface used for
read -e.
xtrace Same as -x.
If -o is supplied with no option-name, the values of the
current options are printed. If +o is supplied with no
option-name, a series of set commands to recreate the
current option settings is displayed on the standard out-
put.
-p Turn on privileged mode. In this mode, the $ENV and
$BASH_ENV files are not processed, shell functions are
not inherited from the environment, and the SHELLOPTS,
BASHOPTS, CDPATH, and GLOBIGNORE variables, if they ap-
pear in the environment, are ignored. If the shell is
started with the effective user (group) id not equal to
the real user (group) id, and the -p option is not sup-
plied, these actions are taken and the effective user id
is set to the real user id. If the -p option is supplied
at startup, the effective user id is not reset. Turning
this option off causes the effective user and group ids
to be set to the real user and group ids.
-r Enable restricted shell mode. This option cannot be un-
set once it has been set.
-t Exit after reading and executing one command.
-u Treat unset variables and parameters other than the spe-
cial parameters "@" and "*", or array variables sub-
scripted with "@" or "*", as an error when performing pa-
rameter expansion. If expansion is attempted on an unset
variable or parameter, the shell prints an error message,
and, if not interactive, exits with a non-zero status.
-v Print shell input lines as they are read.
-x After expanding each simple command, for command, case
command, select command, or arithmetic for command, dis-
play the expanded value of PS4, followed by the command
and its expanded arguments or associated word list.
-B The shell performs brace expansion (see Brace Expansion
in bash(1)). This is on by default.
-C If set, bash does not overwrite an existing file with the
>, >&, and <> redirection operators. This may be over-
ridden when creating output files by using the redirec-
tion operator >| instead of >.
-E If set, any trap on ERR is inherited by shell functions,
command substitutions, and commands executed in a sub-
shell environment. The ERR trap is normally not inher-
ited in such cases.
-H Enable ! style history substitution. This option is on
by default when the shell is interactive.
-P If set, the shell does not resolve symbolic links when
executing commands such as cd that change the current
working directory. It uses the physical directory struc-
ture instead. By default, bash follows the logical chain
of directories when performing commands which change the
current directory.
-T If set, any traps on DEBUG and RETURN are inherited by
shell functions, command substitutions, and commands exe-
cuted in a subshell environment. The DEBUG and RETURN
traps are normally not inherited in such cases.
-- If no arguments follow this option, then the positional
parameters are unset. Otherwise, the positional parame-
ters are set to the args, even if some of them begin with
a -.
- Signal the end of options, cause all remaining args to be
assigned to the positional parameters. The -x and -v op-
tions are turned off. If there are no args, the posi-
tional parameters remain unchanged.
The options are off by default unless otherwise noted. Using +
rather than - causes these options to be turned off. The options
can also be specified as arguments to an invocation of the shell.
The current set of options may be found in $-. The return status
is always true unless an invalid option is encountered.
shift [n]
The positional parameters from n+1 ... are renamed to $1 ....
Parameters represented by the numbers $# down to $#-n+1 are un-
set. n must be a non-negative number less than or equal to $#.
If n is 0, no parameters are changed. If n is not given, it is
assumed to be 1. If n is greater than $#, the positional parame-
ters are not changed. The return status is greater than zero if
n is greater than $# or less than zero; otherwise 0.
shopt [-pqsu] [-o] [optname ...]
Toggle the values of settings controlling optional shell behav-
ior. The settings can be either those listed below, or, if the
-o option is used, those available with the -o option to the set
builtin command. With no options, or with the -p option, a list
of all settable options is displayed, with an indication of
whether or not each is set; if optnames are supplied, the output
is restricted to those options. The -p option causes output to
be displayed in a form that may be reused as input. Other op-
tions have the following meanings:
-s Enable (set) each optname.
-u Disable (unset) each optname.
-q Suppresses normal output (quiet mode); the return status
indicates whether the optname is set or unset. If multi-
ple optname arguments are given with -q, the return status
is zero if all optnames are enabled; non-zero otherwise.
-o Restricts the values of optname to be those defined for
the -o option to the set builtin.
If either -s or -u is used with no optname arguments, shopt shows
only those options which are set or unset, respectively. Unless
otherwise noted, the shopt options are disabled (unset) by de-
fault.
The return status when listing options is zero if all optnames
are enabled, non-zero otherwise. When setting or unsetting op-
tions, the return status is zero unless an optname is not a valid
shell option.
The list of shopt options is:
assoc_expand_once
If set, the shell suppresses multiple evaluation of asso-
ciative array subscripts during arithmetic expression
evaluation, while executing builtins that can perform
variable assignments, and while executing builtins that
perform array dereferencing.
autocd If set, a command name that is the name of a directory is
executed as if it were the argument to the cd command.
This option is only used by interactive shells.
cdable_vars
If set, an argument to the cd builtin command that is not
a directory is assumed to be the name of a variable whose
value is the directory to change to.
cdspell If set, minor errors in the spelling of a directory com-
ponent in a cd command will be corrected. The errors
checked for are transposed characters, a missing charac-
ter, and one character too many. If a correction is
found, the corrected filename is printed, and the command
proceeds. This option is only used by interactive
shells.
checkhash
If set, bash checks that a command found in the hash ta-
ble exists before trying to execute it. If a hashed com-
mand no longer exists, a normal path search is performed.
checkjobs
If set, bash lists the status of any stopped and running
jobs before exiting an interactive shell. If any jobs
are running, this causes the exit to be deferred until a
second exit is attempted without an intervening command
(see JOB CONTROL in bash(1)). The shell always postpones
exiting if any jobs are stopped.
checkwinsize
If set, bash checks the window size after each external
(non-builtin) command and, if necessary, updates the val-
ues of LINES and COLUMNS. This option is enabled by de-
fault.
cmdhist If set, bash attempts to save all lines of a multiple-
line command in the same history entry. This allows easy
re-editing of multi-line commands. This option is en-
abled by default, but only has an effect if command his-
tory is enabled, as described in bash(1) under HISTORY.
compat31
compat32
compat40
compat41
compat42
compat43
compat44
compat50
These control aspects of the shell's compatibility mode
(see SHELL COMPATIBILITY MODE in bash(1)).
complete_fullquote
If set, bash quotes all shell metacharacters in filenames
and directory names when performing completion. If not
set, bash removes metacharacters such as the dollar sign
from the set of characters that will be quoted in com-
pleted filenames when these metacharacters appear in
shell variable references in words to be completed. This
means that dollar signs in variable names that expand to
directories will not be quoted; however, any dollar signs
appearing in filenames will not be quoted, either. This
is active only when bash is using backslashes to quote
completed filenames. This variable is set by default,
which is the default bash behavior in versions through
4.2.
direxpand
If set, bash replaces directory names with the results of
word expansion when performing filename completion. This
changes the contents of the readline editing buffer. If
not set, bash attempts to preserve what the user typed.
dirspell
If set, bash attempts spelling correction on directory
names during word completion if the directory name ini-
tially supplied does not exist.
dotglob If set, bash includes filenames beginning with a `.' in
the results of pathname expansion. The filenames ``.''
and ``..'' must always be matched explicitly, even if
dotglob is set.
execfail
If set, a non-interactive shell will not exit if it can-
not execute the file specified as an argument to the exec
builtin command. An interactive shell does not exit if
exec fails.
expand_aliases
If set, aliases are expanded as described in bash(1) un-
der ALIASES. This option is enabled by default for in-
teractive shells.
extdebug
If set at shell invocation, or in a shell startup file,
arrange to execute the debugger profile before the shell
starts, identical to the --debugger option. If set after
invocation, behavior intended for use by debuggers is en-
abled:
1. The -F option to the declare builtin displays the
source file name and line number corresponding to
each function name supplied as an argument.
2. If the command run by the DEBUG trap returns a
non-zero value, the next command is skipped and
not executed.
3. If the command run by the DEBUG trap returns a
value of 2, and the shell is executing in a sub-
routine (a shell function or a shell script exe-
cuted by the . or source builtins), the shell sim-
ulates a call to return.
4. BASH_ARGC and BASH_ARGV are updated as described
in their descriptions in bash(1)).
5. Function tracing is enabled: command substitution,
shell functions, and subshells invoked with ( com-
mand ) inherit the DEBUG and RETURN traps.
6. Error tracing is enabled: command substitution,
shell functions, and subshells invoked with ( com-
mand ) inherit the ERR trap.
extglob If set, the extended pattern matching features described
in bash(1) under Pathname Expansion are enabled.
extquote
If set, $'string' and $"string" quoting is performed
within ${parameter} expansions enclosed in double quotes.
This option is enabled by default.
failglob
If set, patterns which fail to match filenames during
pathname expansion result in an expansion error.
force_fignore
If set, the suffixes specified by the FIGNORE shell vari-
able cause words to be ignored when performing word com-
pletion even if the ignored words are the only possible
completions. See SHELL VARIABLES in bash(1) for a de-
scription of FIGNORE. This option is enabled by default.
globasciiranges
If set, range expressions used in pattern matching
bracket expressions (see Pattern Matching in bash(1)) be-
have as if in the traditional C locale when performing
comparisons. That is, the current locale's collating se-
quence is not taken into account, so b will not collate
between A and B, and upper-case and lower-case ASCII
characters will collate together.
globskipdots
If set, pathname expansion will never match the filenames
``.'' and ``..'', even if the pattern begins with a
``.''. This option is enabled by default.
globstar
If set, the pattern ** used in a pathname expansion con-
text will match all files and zero or more directories
and subdirectories. If the pattern is followed by a /,
only directories and subdirectories match.
gnu_errfmt
If set, shell error messages are written in the standard
GNU error message format.
histappend
If set, the history list is appended to the file named by
the value of the HISTFILE variable when the shell exits,
rather than overwriting the file.
histreedit
If set, and readline is being used, a user is given the
opportunity to re-edit a failed history substitution.
histverify
If set, and readline is being used, the results of his-
tory substitution are not immediately passed to the shell
parser. Instead, the resulting line is loaded into the
readline editing buffer, allowing further modification.
hostcomplete
If set, and readline is being used, bash will attempt to
perform hostname completion when a word containing a @ is
being completed (see Completing under READLINE in
bash(1)). This is enabled by default.
huponexit
If set, bash will send SIGHUP to all jobs when an inter-
active login shell exits.
inherit_errexit
If set, command substitution inherits the value of the
errexit option, instead of unsetting it in the subshell
environment. This option is enabled when posix mode is
enabled.
interactive_comments
If set, allow a word beginning with # to cause that word
and all remaining characters on that line to be ignored
in an interactive shell (see COMMENTS in bash(1)). This
option is enabled by default.
lastpipe
If set, and job control is not active, the shell runs the
last command of a pipeline not executed in the background
in the current shell environment.
lithist If set, and the cmdhist option is enabled, multi-line
commands are saved to the history with embedded newlines
rather than using semicolon separators where possible.
localvar_inherit
If set, local variables inherit the value and attributes
of a variable of the same name that exists at a previous
scope before any new value is assigned. The nameref at-
tribute is not inherited.
localvar_unset
If set, calling unset on local variables in previous
function scopes marks them so subsequent lookups find
them unset until that function returns. This is identical
to the behavior of unsetting local variables at the cur-
rent function scope.
login_shell
The shell sets this option if it is started as a login
shell (see INVOCATION in bash(1)). The value may not be
changed.
mailwarn
If set, and a file that bash is checking for mail has
been accessed since the last time it was checked, the
message ``The mail in mailfile has been read'' is dis-
played.
no_empty_cmd_completion
If set, and readline is being used, bash will not attempt
to search the PATH for possible completions when comple-
tion is attempted on an empty line.
nocaseglob
If set, bash matches filenames in a case-insensitive
fashion when performing pathname expansion (see Pathname
Expansion in bash(1)).
nocasematch
If set, bash matches patterns in a case-insensitive fash-
ion when performing matching while executing case or [[
conditional commands, when performing pattern substitu-
tion word expansions, or when filtering possible comple-
tions as part of programmable completion.
noexpand_translation
If set, bash encloses the translated results of $"..."
quoting in single quotes instead of double quotes. If
the string is not translated, this has no effect.
nullglob
If set, bash allows patterns which match no files (see
Pathname Expansion in bash(1)) to expand to a null
string, rather than themselves.
patsub_replacement
If set, bash expands occurrences of & in the replacement
string of pattern substitution to the text matched by the
pattern, as described under Parameter Expansion in
bash(1). This option is enabled by default.
progcomp
If set, the programmable completion facilities (see Pro-
grammable Completion in bash(1)) are enabled. This op-
tion is enabled by default.
progcomp_alias
If set, and programmable completion is enabled, bash
treats a command name that doesn't have any completions
as a possible alias and attempts alias expansion. If it
has an alias, bash attempts programmable completion using
the command word resulting from the expanded alias.
promptvars
If set, prompt strings undergo parameter expansion, com-
mand substitution, arithmetic expansion, and quote re-
moval after being expanded as described in PROMPTING in
bash(1). This option is enabled by default.
restricted_shell
The shell sets this option if it is started in restricted
mode (see RESTRICTED SHELL in bash(1)). The value may
not be changed. This is not reset when the startup files
are executed, allowing the startup files to discover
whether or not a shell is restricted.
shift_verbose
If set, the shift builtin prints an error message when
the shift count exceeds the number of positional parame-
ters.
sourcepath
If set, the . (source) builtin uses the value of PATH to
find the directory containing the file supplied as an ar-
gument. This option is enabled by default.
varredir_close
If set, the shell automatically closes file descriptors
assigned using the {varname} redirection syntax (see
REDIRECTION in bash(1)) instead of leaving them open when
the command completes.
xpg_echo
If set, the echo builtin expands backslash-escape se-
quences by default.
suspend [-f]
Suspend the execution of this shell until it receives a SIGCONT
signal. A login shell, or a shell without job control enabled,
cannot be suspended; the -f option can be used to override this
and force the suspension. The return status is 0 unless the
shell is a login shell or job control is not enabled and -f is
not supplied.
test expr
[ expr ]
Return a status of 0 (true) or 1 (false) depending on the evalua-
tion of the conditional expression expr. Each operator and
operand must be a separate argument. Expressions are composed of
the primaries described in bash(1) under CONDITIONAL EXPRESSIONS.
test does not accept any options, nor does it accept and ignore
an argument of -- as signifying the end of options.
Expressions may be combined using the following operators, listed
in decreasing order of precedence. The evaluation depends on the
number of arguments; see below. Operator precedence is used when
there are five or more arguments.
! expr True if expr is false.
( expr )
Returns the value of expr. This may be used to override
the normal precedence of operators.
expr1 -a expr2
True if both expr1 and expr2 are true.
expr1 -o expr2
True if either expr1 or expr2 is true.
test and [ evaluate conditional expressions using a set of rules
based on the number of arguments.
0 arguments
The expression is false.
1 argument
The expression is true if and only if the argument is not
null.
2 arguments
If the first argument is !, the expression is true if and
only if the second argument is null. If the first argu-
ment is one of the unary conditional operators listed in
bash(1) under CONDITIONAL EXPRESSIONS, the expression is
true if the unary test is true. If the first argument is
not a valid unary conditional operator, the expression is
false.
3 arguments
The following conditions are applied in the order listed.
If the second argument is one of the binary conditional
operators listed in bash(1) under CONDITIONAL EXPRESSIONS,
the result of the expression is the result of the binary
test using the first and third arguments as operands. The
-a and -o operators are considered binary operators when
there are three arguments. If the first argument is !,
the value is the negation of the two-argument test using
the second and third arguments. If the first argument is
exactly ( and the third argument is exactly ), the result
is the one-argument test of the second argument. Other-
wise, the expression is false.
4 arguments
The following conditions are applied in the order listed.
If the first argument is !, the result is the negation of
the three-argument expression composed of the remaining
arguments. the two-argument test using the second and
third arguments. If the first argument is exactly ( and
the fourth argument is exactly ), the result is the two-
argument test of the second and third arguments. Other-
wise, the expression is parsed and evaluated according to
precedence using the rules listed above.
5 or more arguments
The expression is parsed and evaluated according to prece-
dence using the rules listed above.
When used with test or [, the < and > operators sort lexicograph-
ically using ASCII ordering.
times Print the accumulated user and system times for the shell and for
processes run from the shell. The return status is 0.
trap [-lp] [[arg] sigspec ...]
The command arg is to be read and executed when the shell re-
ceives signal(s) sigspec. If arg is absent (and there is a sin-
gle sigspec) or -, each specified signal is reset to its original
disposition (the value it had upon entrance to the shell). If
arg is the null string the signal specified by each sigspec is
ignored by the shell and by the commands it invokes. If arg is
not present and -p has been supplied, then the trap commands as-
sociated with each sigspec are displayed. If no arguments are
supplied or if only -p is given, trap prints the list of commands
associated with each signal. The -l option causes the shell to
print a list of signal names and their corresponding numbers.
Each sigspec is either a signal name defined in <signal.h>, or a
signal number. Signal names are case insensitive and the SIG
prefix is optional.
If a sigspec is EXIT (0) the command arg is executed on exit from
the shell. If a sigspec is DEBUG, the command arg is executed
before every simple command, for command, case command, select
command, every arithmetic for command, and before the first com-
mand executes in a shell function (see SHELL GRAMMAR in bash(1)).
Refer to the description of the extdebug option to the shopt
builtin for details of its effect on the DEBUG trap. If a
sigspec is RETURN, the command arg is executed each time a shell
function or a script executed with the . or source builtins fin-
ishes executing.
If a sigspec is ERR, the command arg is executed whenever a
pipeline (which may consist of a single simple command), a list,
or a compound command returns a non-zero exit status, subject to
the following conditions. The ERR trap is not executed if the
failed command is part of the command list immediately following
a while or until keyword, part of the test in an if statement,
part of a command executed in a && or || list except the command
following the final && or ||, any command in a pipeline but the
last, or if the command's return value is being inverted using !.
These are the same conditions obeyed by the errexit (-e) option.
Signals ignored upon entry to the shell cannot be trapped or re-
set. Trapped signals that are not being ignored are reset to
their original values in a subshell or subshell environment when
one is created. The return status is false if any sigspec is in-
valid; otherwise trap returns true.
type [-aftpP] name [name ...]
With no options, indicate how each name would be interpreted if
used as a command name. If the -t option is used, type prints a
string which is one of alias, keyword, function, builtin, or file
if name is an alias, shell reserved word, function, builtin, or
disk file, respectively. If the name is not found, then nothing
is printed, and an exit status of false is returned. If the -p
option is used, type either returns the name of the disk file
that would be executed if name were specified as a command name,
or nothing if ``type -t name'' would not return file. The -P op-
tion forces a PATH search for each name, even if ``type -t name''
would not return file. If a command is hashed, -p and -P print
the hashed value, which is not necessarily the file that appears
first in PATH. If the -a option is used, type prints all of the
places that contain an executable named name. This includes
aliases and functions, if and only if the -p option is not also
used. The table of hashed commands is not consulted when using
-a. The -f option suppresses shell function lookup, as with the
command builtin. type returns true if all of the arguments are
found, false if any are not found.
ulimit [-HS] -a
ulimit [-HS] [-bcdefiklmnpqrstuvxPRT [limit]]
Provides control over the resources available to the shell and to
processes started by it, on systems that allow such control. The
-H and -S options specify that the hard or soft limit is set for
the given resource. A hard limit cannot be increased by a non-
root user once it is set; a soft limit may be increased up to the
value of the hard limit. If neither -H nor -S is specified, both
the soft and hard limits are set. The value of limit can be a
number in the unit specified for the resource or one of the spe-
cial values hard, soft, or unlimited, which stand for the current
hard limit, the current soft limit, and no limit, respectively.
If limit is omitted, the current value of the soft limit of the
resource is printed, unless the -H option is given. When more
than one resource is specified, the limit name and unit, if ap-
propriate, are printed before the value. Other options are in-
terpreted as follows:
-a All current limits are reported; no limits are set
-b The maximum socket buffer size
-c The maximum size of core files created
-d The maximum size of a process's data segment
-e The maximum scheduling priority ("nice")
-f The maximum size of files written by the shell and its
children
-i The maximum number of pending signals
-k The maximum number of kqueues that may be allocated
-l The maximum size that may be locked into memory
-m The maximum resident set size (many systems do not honor
this limit)
-n The maximum number of open file descriptors (most systems
do not allow this value to be set)
-p The pipe size in 512-byte blocks (this may not be set)
-q The maximum number of bytes in POSIX message queues
-r The maximum real-time scheduling priority
-s The maximum stack size
-t The maximum amount of cpu time in seconds
-u The maximum number of processes available to a single user
-v The maximum amount of virtual memory available to the
shell and, on some systems, to its children
-x The maximum number of file locks
-P The maximum number of pseudoterminals
-R The maximum time a real-time process can run before block-
ing, in microseconds
-T The maximum number of threads
If limit is given, and the -a option is not used, limit is the
new value of the specified resource. If no option is given, then
-f is assumed. Values are in 1024-byte increments, except for
-t, which is in seconds; -R, which is in microseconds; -p, which
is in units of 512-byte blocks; -P, -T, -b, -k, -n, and -u, which
are unscaled values; and, when in posix mode, -c and -f, which
are in 512-byte increments. The return status is 0 unless an in-
valid option or argument is supplied, or an error occurs while
setting a new limit.
umask [-p] [-S] [mode]
The user file-creation mask is set to mode. If mode begins with
a digit, it is interpreted as an octal number; otherwise it is
interpreted as a symbolic mode mask similar to that accepted by
chmod(1). If mode is omitted, the current value of the mask is
printed. The -S option causes the mask to be printed in symbolic
form; the default output is an octal number. If the -p option is
supplied, and mode is omitted, the output is in a form that may
be reused as input. The return status is 0 if the mode was suc-
cessfully changed or if no mode argument was supplied, and false
otherwise.
unalias [-a] [name ...]
Remove each name from the list of defined aliases. If -a is sup-
plied, all alias definitions are removed. The return value is
true unless a supplied name is not a defined alias.
unset [-fv] [-n] [name ...]
For each name, remove the corresponding variable or function. If
the -v option is given, each name refers to a shell variable, and
that variable is removed. Read-only variables may not be unset.
If -f is specified, each name refers to a shell function, and the
function definition is removed. If the -n option is supplied,
and name is a variable with the nameref attribute, name will be
unset rather than the variable it references. -n has no effect
if the -f option is supplied. If no options are supplied, each
name refers to a variable; if there is no variable by that name,
a function with that name, if any, is unset. Each unset variable
or function is removed from the environment passed to subsequent
commands. If any of BASH_ALIASES, BASH_ARGV0, BASH_CMDS,
BASH_COMMAND, BASH_SUBSHELL, BASHPID, COMP_WORDBREAKS, DIRSTACK,
EPOCHREALTIME, EPOCHSECONDS, FUNCNAME, GROUPS, HISTCMD, LINENO,
RANDOM, SECONDS, or SRANDOM are unset, they lose their special
properties, even if they are subsequently reset. The exit status
is true unless a name is readonly or may not be unset.
wait [-fn] [-p varname] [id ...]
Wait for each specified child process and return its termination
status. Each id may be a process ID or a job specification; if a
job spec is given, all processes in that job's pipeline are
waited for. If id is not given, wait waits for all running back-
ground jobs and the last-executed process substitution, if its
process id is the same as $!, and the return status is zero. If
the -n option is supplied, wait waits for a single job from the
list of ids or, if no ids are supplied, any job, to complete and
returns its exit status. If none of the supplied arguments is a
child of the shell, or if no arguments are supplied and the shell
has no unwaited-for children, the exit status is 127. If the -p
option is supplied, the process or job identifier of the job for
which the exit status is returned is assigned to the variable
varname named by the option argument. The variable will be unset
initially, before any assignment. This is useful only when the
-n option is supplied. Supplying the -f option, when job control
is enabled, forces wait to wait for id to terminate before re-
turning its status, instead of returning when it changes status.
If id specifies a non-existent process or job, the return status
is 127. If wait is interrupted by a signal, the return status
will be greater than 128, as described under SIGNALS in bash(1).
Otherwise, the return status is the exit status of the last
process or job waited for.
SHELL COMPATIBILITY MODE
Bash-4.0 introduced the concept of a shell compatibility level, speci-
fied as a set of options to the shopt builtin ( compat31, compat32, com-
pat40, compat41, and so on). There is only one current compatibility
level -- each option is mutually exclusive. The compatibility level is
intended to allow users to select behavior from previous versions that
is incompatible with newer versions while they migrate scripts to use
current features and behavior. It's intended to be a temporary solution.
This section does not mention behavior that is standard for a particular
version (e.g., setting compat32 means that quoting the rhs of the regexp
matching operator quotes special regexp characters in the word, which is
default behavior in bash-3.2 and subsequent versions).
If a user enables, say, compat32, it may affect the behavior of other
compatibility levels up to and including the current compatibility
level. The idea is that each compatibility level controls behavior that
changed in that version of bash, but that behavior may have been present
in earlier versions. For instance, the change to use locale-based com-
parisons with the [[ command came in bash-4.1, and earlier versions used
ASCII-based comparisons, so enabling compat32 will enable ASCII-based
comparisons as well. That granularity may not be sufficient for all
uses, and as a result users should employ compatibility levels care-
fully. Read the documentation for a particular feature to find out the
current behavior.
Bash-4.3 introduced a new shell variable: BASH_COMPAT. The value as-
signed to this variable (a decimal version number like 4.2, or an inte-
ger corresponding to the compatNN option, like 42) determines the com-
patibility level.
Starting with bash-4.4, Bash has begun deprecating older compatibility
levels. Eventually, the options will be removed in favor of BASH_COM-
PAT.
Bash-5.0 is the final version for which there will be an individual
shopt option for the previous version. Users should use BASH_COMPAT on
bash-5.0 and later versions.
The following table describes the behavior changes controlled by each
compatibility level setting. The compatNN tag is used as shorthand for
setting the compatibility level to NN using one of the following mecha-
nisms. For versions prior to bash-5.0, the compatibility level may be
set using the corresponding compatNN shopt option. For bash-4.3 and
later versions, the BASH_COMPAT variable is preferred, and it is re-
quired for bash-5.1 and later versions.
compat31
• quoting the rhs of the [[ command's regexp matching opera-
tor (=~) has no special effect
compat32
• interrupting a command list such as "a ; b ; c" causes the
execution of the next command in the list (in bash-4.0 and
later versions, the shell acts as if it received the in-
terrupt, so interrupting one command in a list aborts the
execution of the entire list)
compat40
• the < and > operators to the [[ command do not consider
the current locale when comparing strings; they use ASCII
ordering. Bash versions prior to bash-4.1 use ASCII col-
lation and strcmp(3); bash-4.1 and later use the current
locale's collation sequence and strcoll(3).
compat41
• in posix mode, time may be followed by options and still
be recognized as a reserved word (this is POSIX interpre-
tation 267)
• in posix mode, the parser requires that an even number of
single quotes occur in the word portion of a double-quoted
parameter expansion and treats them specially, so that
characters within the single quotes are considered quoted
(this is POSIX interpretation 221)
compat42
• the replacement string in double-quoted pattern substitu-
tion does not undergo quote removal, as it does in ver-
sions after bash-4.2
• in posix mode, single quotes are considered special when
expanding the word portion of a double-quoted parameter
expansion and can be used to quote a closing brace or
other special character (this is part of POSIX interpreta-
tion 221); in later versions, single quotes are not spe-
cial within double-quoted word expansions
compat43
• the shell does not print a warning message if an attempt
is made to use a quoted compound assignment as an argument
to declare (e.g., declare -a foo='(1 2)'). Later versions
warn that this usage is deprecated
• word expansion errors are considered non-fatal errors that
cause the current command to fail, even in posix mode (the
default behavior is to make them fatal errors that cause
the shell to exit)
• when executing a shell function, the loop state (while/un-
til/etc.) is not reset, so break or continue in that
function will break or continue loops in the calling con-
text. Bash-4.4 and later reset the loop state to prevent
this
compat44
• the shell sets up the values used by BASH_ARGV and
BASH_ARGC so they can expand to the shell's positional pa-
rameters even if extended debugging mode is not enabled
• a subshell inherits loops from its parent context, so
break or continue will cause the subshell to exit.
Bash-5.0 and later reset the loop state to prevent the
exit
• variable assignments preceding builtins like export and
readonly that set attributes continue to affect variables
with the same name in the calling environment even if the
shell is not in posix mode
compat50
• Bash-5.1 changed the way $RANDOM is generated to introduce
slightly more randomness. If the shell compatibility level
is set to 50 or lower, it reverts to the method from
bash-5.0 and previous versions, so seeding the random num-
ber generator by assigning a value to RANDOM will produce
the same sequence as in bash-5.0
• If the command hash table is empty, bash versions prior to
bash-5.1 printed an informational message to that effect,
even when producing output that can be reused as input.
Bash-5.1 suppresses that message when the -l option is
supplied.
compat51
• The unset builtin treats attempts to unset array sub-
scripts @ and * differently depending on whether the array
is indexed or associative, and differently than in previ-
ous versions.
SEE ALSO
bash(1), sh(1)
GNU Bash-2.05a 2001 October 29 BASH-BUILTINS(7)
Generated by dwww version 1.16 on Tue Dec 16 07:21:29 CET 2025.